main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ma330gq-z: viewers · Ray
ma330gq-z-etched.glb Publish 0.1.0 · Ray
ma330gq-z-etched.step ma330gq-z: factory component page (tier=lcsc) · Ray
ma330gq-z-hero.glb ma330gq-z: hero GLB from the etched model (keeps the MPN mark) · Ray
ma330gq-z-hero.overlay.json Publish 0.1.0 · Ray
ma330gq-z.glb Publish 0.1.0 · Ray
ma330gq-z.kicad_mod Publish 0.1.0 · Ray
ma330gq-z.kicad_sym Publish 0.1.0 · Ray
ma330gq-z.lbr Publish 0.1.0 · Ray
ma330gq-z.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

MA330GQ-Z

Monolithic Power Systems · Position Sensor · QFN-16(3x3)

MA330GQ-Z from Monolithic Power Systems, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V power_in Motor commutation output (UVW interface V phase).
2 A output Incremental ABZ encoder output A.
3 Z output Incremental ABZ encoder output Z (index).
4 MOSI input SPI data in; has an internal pull-down resistor.
5 CS input SPI chip select; has an internal pull-up resistor.
6 B output Incremental ABZ encoder output B, shifted 1/4 of the pulse period relative to A.
7 MISO tri_state SPI data out; has an internal pull-down resistor enabled at high-impedance state.
8 GND power_in Supply ground.
9 W output Motor commutation output (UVW interface W phase).
10 TEST input Test pin; connect to ground.
11 MGL output Digital output indicating field strength below MGLT level.
12 SCLK input SPI clock; has an internal pull-down resistor.
13 VDD power_in Supply 3.3V (recommended range 3.0V to 3.6V).
14 NC unconnected No connection; leave unconnected.
15 U output Motor commutation output (UVW interface U phase).
16 MGH output Digital output indicating field strength above MGHT level.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package QFN-16(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 3 3.3 3.6 V 4
Supply current IDD 10.2 11.7 13.8 mA From -40°C to +125°C 4
Operating temperature TOP -40 125 °C 4
Applied magnetic field B 30 60 mT 4
Supply voltage -0.5 4.6 V 3
Input pin voltage VI -0.5 6 V 3
Output pin voltage VO -0.5 4.6 V 3
Continuous power dissipation 2 W TA = 25°C 3
Junction temperature TJ 125 °C 3
Storage temperature -65 150 °C 3
Thermal resistance junction-ambient θJA 50 °C/W QFN-16 (3mmx3mm), JESD51-7 4-layer PCB 3
Thermal resistance junction-case θJC 12 °C/W QFN-16 (3mmx3mm), JESD51-7 4-layer PCB 3
Effective resolution (±3σ) 9 9.8 10.5 bits Filter window t = 64µs 5
Effective resolution (±3σ) 13 13.8 14.5 bits Filter window t = 16ms 5
Noise RMS 0.04 0.07 0.12 Deg Filter window t = 64µs 5
Noise RMS 0.003 0.004 0.007 deg Filter window t = 16ms 5
Refresh rate 850 980 1100 kHz 5
Latency 8 10 µs Constant speed propagation delay 5
INL at 25°C 0.7 deg At room temperature over the full field range 5
INL between -40°C to +125°C 1.1 deg Over the full temperature range and field range 5
Pull-up resistor RPU 46 66 97 kΩ 6
Pull-down resistor RPD 43 55 97 kΩ 6
Input high voltage VIH 2.5 5.5 V 6
Input low voltage VIL -0.3 0.8 V 6
Output low voltage VOL 0.4 V IOL = 4mA 6
Output high voltage VOH 2.4 V IOH = 4mA 6
SCLK period tsclk 40 ns 12
CS falling to SCLK falling tcsL 80 ns 12

CAD (KiCad official)

  • Symbol: MA330GQ-Z
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: ma330gq-z-etched.step / ma330gq-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ma330gq-z.step / ma330gq-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (30 pp, sha256 f67a1ff2f9a4fa70, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF