main
History Download
Ray Publish 0.1.0 43360fe

MA302GQ-Z

Monolithic Power Systems · Position Sensor · QFN-16(3x3)

MA302GQ-Z from Monolithic Power Systems, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V power_in Motor commutation output (UVW interface, V phase).
2 A output Incremental ABZ encoder output A, programmable 1 to 256 pulses per turn.
3 Z output Incremental ABZ encoder output Z (index).
4 MOSI input SPI data in; has an internal pull-down resistor.
5 CS input SPI chip select; has an internal pull-up resistor.
6 B output Incremental ABZ encoder output B, shifted a quarter pulse period from A.
7 MISO tri_state SPI data out; has an internal pull-down resistor that is enabled at a high impedance state.
8 GND power_in Supply ground.
9 W output Motor commutation output (UVW interface, W phase).
10 TEST input Test pin; connect to ground.
11 MGL output Digital output indicating field strength below MGLT level (3.3V amplitude).
12 SCLK input SPI clock; has an internal pull-down resistor.
13 VDD power_in Supply 3.3V.
14 NC unconnected No connection; leave unconnected.
15 U output Motor commutation output (UVW interface, U phase).
16 MGH output Digital output indicating field strength above MGHT level.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Monolithic Power Systems
Package QFN-16(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 3 3.3 3.6 V 4
Supply current IDD 10.2 11.7 13.8 mA From -40°C to +125°C 4
Operating temperature Top -40 125 °C 4
Applied magnetic field B 30 60 mT 4
Supply voltage -0.5 4.6 V 3
Input pin voltage VI -0.5 6 V 3
Output pin voltage VO -0.5 4.6 V 3
Continuous power dissipation 2 W TA = +25°C 3
Junction temperature 125 °C 3
Storage temperature -65 150 °C 3
Thermal resistance junction-ambient θJA 50 °C/W QFN-16 (3mmx3mm), JESD51-7 4-layer PCB 3
Thermal resistance junction-case θJC 12 °C/W QFN-16 (3mmx3mm), JESD51-7 4-layer PCB 3
Effective resolution 11 11.8 12.8 bit 3σ deviation of the noise distribution 5
Noise rms 0.01 0.02 0.03 deg 5
Refresh rate 850 980 1100 kHz 5
Data output length 14 bit 5
Power-up time 12 ms Guaranteed by design 5
Latency 8 10 µs Constant speed propagation delay 5
Filter cutoff frequency Fcutoff 390 Hz 5
INL at 25°C 0.7 deg At room temperature over the full field range 5
INL between -40°C to +125°C 1.1 deg Over the full temperature range and field range 5
Temperature induced drift at room temperature 0.015 0.04 deg/°C 5
Temperature induced variation 0.5 1.2 deg From 25°C to 85°C 5
Temperature induced variation 1 2.1 deg From 25°C to 125°C 5
Magnetic field induced drift 0.005 deg/mT 5
Voltage supply induced drift 0.3 deg/V 5
ABZ update rate 16 MHz 5
Resolution - edges per turn 4 1024 Programmable 5
Pulses per channel per turn PPT+1 1 256 Programmable 5
ABZ hysteresis H 0.7 deg 5
Systematic jitter 13 % For PPT = 255, between 0 and 100krpm, up to 60mT 5
Systematic jitter 7 % For PPT = 127, between 0 and 100krpm 5
Random jitter (3σ) 5.5 % For PPT = 255, between 0 and 100krpm 5
Random jitter (3σ) 2.8 % For PPT = 127, between 0 and 100krpm 5
Overall ABZ jitter 0.3 deg Up to 60mT 5
Cycle per turn NPP 1 8 5
UVW hysteresis H 0.7 deg 5
UVW jitter (3σ) 0.1 0.3 deg 5
Magnetic field detection accuracy 5 mT 6
Magnetic field detection hysteresis MagHys 6 mT 6
Magnetic field detection temperature drift -600 ppm/°C 6
Input high voltage VIH 2.5 5.5 V 6
Input low voltage VIL -0.3 0.8 V 6
Output low voltage VOL 0.4 V IOL = 4mA 6
Output high voltage VOH 2.4 V IOH = 4mA 6
Pull-up resistor RPU 46 66 97 kΩ 6
Pull-down resistor RPD 43 55 97 kΩ 6
Rising edge slew rate TR 0.7 V/ns CL = 50pF 6
Falling edge slew rate TF 0.7 V/ns CL = 50pF 6
Idle time between two subsequent angle transmissions tidleAngle 150 ns 12
Idle time before and after a register readout tidleReg 750 ns 12
Idle time between a write command and a register readout tnvm 20 ms 12
Time between CS falling edge and SCLK falling edge tcsL 80 ns 12
SCLK period tsclk 40 ns 12
Low level of SCLK signal tsclkL 20 ns 12
High level of SCLK signal tsclkH 20 ns 12
Time between SCLK rising edge and CS rising edge tcsH 25 ns 12
SCLK setting edge to data output valid tMISO 15 ns 12
Data input valid to SCLK reading edge tMOSI 15 ns 12

CAD (KiCad official)

  • Symbol: MA302GQ-Z
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: ma302gq-z-etched.step / ma302gq-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ma302gq-z.step / ma302gq-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Monolithic Power Systems datasheet (29 pp, sha256 8ed4c130c117f31c, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF