main
Ray
Initial commit: component/m95p32-ixmnt
4ea8f30
M95P32-IXMNT
STMicroelectronics · EEPROM · SO-8
M95P32-IXMNT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip select input; device active and selected when driven low, deselected with outputs in high-impedance state when driven high. |
| 2 | Q-DQ1 | output | Serial data output (MISO) in single-output mode with data shifted out on falling clock edge; becomes DQ1 output in dual and quad modes. |
| 3 | W-DQ2 | bidirectional | Write protect input controlling block protection bits status during write operations; becomes DQ2 output in quad-output read mode. |
| 4 | VSS | power_in | Ground reference and signal return for all signals including VCC supply voltage. |
| 5 | D-DQ0 | bidirectional | Serial data input (MOSI) for instructions and data with values latched on rising clock edge; becomes DQ0 output in dual and quad read modes. |
| 6 | C | input | Serial clock input with maximum frequency of 80 MHz synchronizing instruction and data latching on rising edge and output on falling edge. |
| 7 | HOLD-DQ3 | bidirectional | Hold input to pause all serial communications without device deselection; becomes DQ3 output in quad-output read mode after address bytes. |
| 8 | VCC | power_in | Device core power supply with operating range 1.6 to 3.6 V for industrial temperature grade M95P32-I. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95P32-IXMNT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
m95p32-ixmnt-etched.step/m95p32-ixmnt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95p32-ixmnt.step/m95p32-ixmnt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (71 pp, sha256
f3a57cf824644632, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M95P32-IXMNT
**STMicroelectronics** · EEPROM · SO-8
M95P32-IXMNT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip select input; device active and selected when driven low, deselected with outputs in high-impedance state when driven high. |
| 2 | Q-DQ1 | output | Serial data output (MISO) in single-output mode with data shifted out on falling clock edge; becomes DQ1 output in dual and quad modes. |
| 3 | W-DQ2 | bidirectional | Write protect input controlling block protection bits status during write operations; becomes DQ2 output in quad-output read mode. |
| 4 | VSS | power_in | Ground reference and signal return for all signals including VCC supply voltage. |
| 5 | D-DQ0 | bidirectional | Serial data input (MOSI) for instructions and data with values latched on rising clock edge; becomes DQ0 output in dual and quad read modes. |
| 6 | C | input | Serial clock input with maximum frequency of 80 MHz synchronizing instruction and data latching on rising edge and output on falling edge. |
| 7 | HOLD-DQ3 | bidirectional | Hold input to pause all serial communications without device deselection; becomes DQ3 output in quad-output read mode after address bytes. |
| 8 | VCC | power_in | Device core power supply with operating range 1.6 to 3.6 V for industrial temperature grade M95P32-I. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `M95P32-IXMNT`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `m95p32-ixmnt-etched.step` / `m95p32-ixmnt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m95p32-ixmnt.step` / `m95p32-ixmnt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589837373674074112) (71 pp, sha256 `f3a57cf824644632`, retrieved 2026-09-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m95p32-ixmnt-datasheet.pdf)