component
M95M01-RMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/m95m01-rmn6tp
1d911d9
M95M01-RMN6TP
STMicroelectronics · EEPROM · SOIC-8
M95M01-RMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select; driving S low selects the device and places it in Active Power mode, while S high deselects the device and puts Serial Data Output (Q) into high impedance (Standby Power mode unless a write is in progress). |
| 2 | Q | output | Serial Data Output; used to transfer data serially out of the device, with data shifted out on the falling edge of Serial Clock (C). |
| 3 | W | input | Write Protect; freezes the size of the memory area protected against Write instructions as set by the BP1/BP0 Status Register bits, and must be driven high or low and stable during all Write instructions. |
| 4 | VSS | power_in | Ground; the reference for all signals, including the VCC supply voltage. |
| 5 | D | input | Serial Data Input; transfers instructions, addresses, and write data serially into the device, latched on the rising edge of Serial Clock (C). |
| 6 | C | input | Serial Clock; provides the timing of the serial interface, with input data latched on the rising edge and output data changing on the falling edge of this clock. |
| 7 | HOLD | input | Hold input; when driven low while the device is selected, pauses serial communication without deselecting the device, placing Q in high impedance and making D and C don't-care. |
| 8 | VCC | power_in | Supply voltage input; for the M95M01-R variant must be held stable within 1.8 V to 5.5 V during operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95M01-RMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
m95m01-rmn6tp-etched.step/m95m01-rmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95m01-rmn6tp.step/m95m01-rmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (52 pp, sha256
213174df0720f2fe, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M95M01-RMN6TP
**STMicroelectronics** · EEPROM · SOIC-8
M95M01-RMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select; driving S low selects the device and places it in Active Power mode, while S high deselects the device and puts Serial Data Output (Q) into high impedance (Standby Power mode unless a write is in progress). |
| 2 | Q | output | Serial Data Output; used to transfer data serially out of the device, with data shifted out on the falling edge of Serial Clock (C). |
| 3 | W | input | Write Protect; freezes the size of the memory area protected against Write instructions as set by the BP1/BP0 Status Register bits, and must be driven high or low and stable during all Write instructions. |
| 4 | VSS | power_in | Ground; the reference for all signals, including the VCC supply voltage. |
| 5 | D | input | Serial Data Input; transfers instructions, addresses, and write data serially into the device, latched on the rising edge of Serial Clock (C). |
| 6 | C | input | Serial Clock; provides the timing of the serial interface, with input data latched on the rising edge and output data changing on the falling edge of this clock. |
| 7 | HOLD | input | Hold input; when driven low while the device is selected, pauses serial communication without deselecting the device, placing Q in high impedance and making D and C don't-care. |
| 8 | VCC | power_in | Supply voltage input; for the M95M01-R variant must be held stable within 1.8 V to 5.5 V during operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `M95M01-RMN6TP`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `m95m01-rmn6tp-etched.step` / `m95m01-rmn6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m95m01-rmn6tp.step` / `m95m01-rmn6tp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586188498223443968) (52 pp, sha256 `213174df0720f2fe`, retrieved 2026-09-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m95m01-rmn6tp-datasheet.pdf)