← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# M95M01-DWMN3TP++**STMicroelectronics** · EEPROM · SOP-8++M95M01-DWMN3TP from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | /S | input | Active-low Chip Select; driving low selects the device to start SPI communication; driving high deselects the device and forces Q to high impedance; edge-sensitive after power-up (falling edge must be detected before first operation). |+| 2 | Q | tri_state | Serial data output; shifts data out MSB-first on the falling edge of C during Read operations; enters high impedance when S is high or during Hold mode; VOL ≤ 0.4 V at IOL = 2 mA, VOH ≥ 0.8 VCC at IOH = −2 mA, output capacitance max 8 pF. |+| 3 | /W | input | Active-low Write Protect input; when driven low with SRWD bit = 1, writing the Status Register (WRSR) is blocked and BP1, BP0 bits are frozen; must be driven high or low (not floated). |+| 4 | VSS | power_in | Ground reference (0 V) for all signals including VCC; return current path for supply and all I/O signals. |+| 5 | D | input | Serial data input; receives instruction bytes, 24-bit addresses, and write data MSB-first, latched on the rising edge of C; VIH ≥ 0.7 VCC, VIL ≤ 0.3 VCC, input capacitance max 6 pF. |+| 6 | C | input | Serial clock input; synchronizes the SPI interface (CPOL=0/CPHA=0 or CPOL=1/CPHA=1); data on D latched on rising edge, Q changes after falling edge; fC max 10 MHz at VCC ≥ 2.5 V or 16 MHz at VCC ≥ 4.5 V (TA ≤ 85 °C). |+| 7 | /HOLD | input | Active-low Hold input; asserting low while C is low pauses serial communication without deselecting the device; Q enters high impedance during Hold and D/C inputs are ignored; deselecting while in Hold mode resets the paused communication. |+| 8 | VCC | power_in | Supply voltage, 2.5 V to 5.5 V; must be stable before issuing any instruction; decouple with 10 nF to 100 nF capacitor close to VCC/VSS pins; ICC read max 4 mA at 5.5 V, standby ICC1 max 40 µA at 145 °C/5.5 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOP-8 |+| Category | Memory |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `M95M01-DWMN3TP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)+- 3D model files: `m95m01-dwmn3tp-etched.step` / `m95m01-dwmn3tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m95m01-dwmn3tp.step` / `m95m01-dwmn3tp.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885012149620736) (40 pp, sha256 `9497f4a9c0dcdee7`, retrieved 2026-09-26, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-4-6` (text+vision), consensus `claude-opus-4-7` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m95m01-dwmn3tp-datasheet.pdf)
page.jsonadded+155@@ -0,0 +1,155 @@+{+ "slug": "m95m01-dwmn3tp",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "m95m01-dwmn3tp",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "m95m01-dwmn3tp.kicad_sym",+ "m95m01-dwmn3tp.kicad_mod",+ "m95m01-dwmn3tp.glb",+ "m95m01-dwmn3tp.step",+ "m95m01-dwmn3tp.lbr",+ "docs/hero.png",+ "docs/m95m01-dwmn3tp-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "M95M01-DWMN3TP",+ "manufacturer": "STMicroelectronics",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885012149620736",+ "parts": {+ "symbol": "m95m01-dwmn3tp.kicad_sym",+ "footprint": "m95m01-dwmn3tp.kicad_mod",+ "model_3d": "m95m01-dwmn3tp-etched.glb",+ "model_3d_plain": "m95m01-dwmn3tp.glb",+ "model_3d_step": "m95m01-dwmn3tp-etched.step",+ "model_3d_step_plain": "m95m01-dwmn3tp.step",+ "lbr": "m95m01-dwmn3tp.lbr"+ },+ "distributor_links": {+ "lcsc": "C221456"+ },+ "distributor_check": {+ "checked_at": "2026-09-26T14:30:07Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "/S",+ "type": "input",+ "description": "Active-low Chip Select; driving low selects the device to start SPI communication; driving high deselects the device and forces Q to high impedance; edge-sensitive after power-up (falling edge must be detected before first operation)."+ },+ {+ "number": "2",+ "name": "Q",+ "type": "tri_state",+ "description": "Serial data output; shifts data out MSB-first on the falling edge of C during Read operations; enters high impedance when S is high or during Hold mode; VOL ≤ 0.4 V at IOL = 2 mA, VOH ≥ 0.8 VCC at IOH = −2 mA, output capacitance max 8 pF."+ },+ {+ "number": "3",+ "name": "/W",+ "type": "input",+ "description": "Active-low Write Protect input; when driven low with SRWD bit = 1, writing the Status Register (WRSR) is blocked and BP1, BP0 bits are frozen; must be driven high or low (not floated)."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference (0 V) for all signals including VCC; return current path for supply and all I/O signals."+ },+ {+ "number": "5",+ "name": "D",+ "type": "input",+ "description": "Serial data input; receives instruction bytes, 24-bit addresses, and write data MSB-first, latched on the rising edge of C; VIH ≥ 0.7 VCC, VIL ≤ 0.3 VCC, input capacitance max 6 pF."+ },+ {+ "number": "6",+ "name": "C",+ "type": "input",+ "description": "Serial clock input; synchronizes the SPI interface (CPOL=0/CPHA=0 or CPOL=1/CPHA=1); data on D latched on rising edge, Q changes after falling edge; fC max 10 MHz at VCC ≥ 2.5 V or 16 MHz at VCC ≥ 4.5 V (TA ≤ 85 °C)."+ },+ {+ "number": "7",+ "name": "/HOLD",+ "type": "input",+ "description": "Active-low Hold input; asserting low while C is low pauses serial communication without deselecting the device; Q enters high impedance during Hold and D/C inputs are ignored; deselecting while in Hold mode resets the paused communication."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage, 2.5 V to 5.5 V; must be stable before issuing any instruction; decouple with 10 nF to 100 nF capacitor close to VCC/VSS pins; ICC read max 4 mA at 5.5 V, standby ICC1 max 40 µA at 145 °C/5.5 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-sonnet-4-6",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-4-7",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 40,+ "cost_usd": 0.5712,+ "at": "2026-09-26T14:29:49"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885012149620736",+ "pages": 40,+ "sha256": "9497f4a9c0dcdee7",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}