← Commit history
m95m01-dwmn3tp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+88−8
package.json+46−6@@ -71,7 +71,7 @@ "number": "2", "name": "Q", "type": "tri_state",- "description": "Serial data output; shifts data out MSB-first on the falling edge of C during Read operations; enters high impedance when S is high or during Hold mode; VOL \u2264 0.4 V at IOL = 2 mA, VOH \u2265 0.8 VCC at IOH = \u22122 mA, output capacitance max 8 pF."+ "description": "Serial data output; shifts data out MSB-first on the falling edge of C during Read operations; enters high impedance when S is high or during Hold mode; VOL ≤ 0.4 V at IOL = 2 mA, VOH ≥ 0.8 VCC at IOH = −2 mA, output capacitance max 8 pF." }, { "number": "3",@@ -89,13 +89,13 @@ "number": "5", "name": "D", "type": "input",- "description": "Serial data input; receives instruction bytes, 24-bit addresses, and write data MSB-first, latched on the rising edge of C; VIH \u2265 0.7 VCC, VIL \u2264 0.3 VCC, input capacitance max 6 pF."+ "description": "Serial data input; receives instruction bytes, 24-bit addresses, and write data MSB-first, latched on the rising edge of C; VIH ≥ 0.7 VCC, VIL ≤ 0.3 VCC, input capacitance max 6 pF." }, { "number": "6", "name": "C", "type": "input",- "description": "Serial clock input; synchronizes the SPI interface (CPOL=0/CPHA=0 or CPOL=1/CPHA=1); data on D latched on rising edge, Q changes after falling edge; fC max 10 MHz at VCC \u2265 2.5 V or 16 MHz at VCC \u2265 4.5 V (TA \u2264 85 \u00b0C)."+ "description": "Serial clock input; synchronizes the SPI interface (CPOL=0/CPHA=0 or CPOL=1/CPHA=1); data on D latched on rising edge, Q changes after falling edge; fC max 10 MHz at VCC ≥ 2.5 V or 16 MHz at VCC ≥ 4.5 V (TA ≤ 85 °C)." }, { "number": "7",@@ -107,7 +107,7 @@ "number": "8", "name": "VCC", "type": "power_in",- "description": "Supply voltage, 2.5 V to 5.5 V; must be stable before issuing any instruction; decouple with 10 nF to 100 nF capacitor close to VCC/VSS pins; ICC read max 4 mA at 5.5 V, standby ICC1 max 40 \u00b5A at 145 \u00b0C/5.5 V."+ "description": "Supply voltage, 2.5 V to 5.5 V; must be stable before issuing any instruction; decouple with 10 nF to 100 nF capacitor close to VCC/VSS pins; ICC read max 4 mA at 5.5 V, standby ICC1 max 40 µA at 145 °C/5.5 V." } ], "provenance": {@@ -144,6 +144,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "m95m01-dwmn3tp.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "m95m01-dwmn3tp-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "4fa2aa09364037d4c45d6ca2e92ad4e1d855883831978ffaa2976834ea2eb043",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -129,7 +129,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "m95m01-dwmn3tp.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "m95m01-dwmn3tp-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "4fa2aa09364037d4c45d6ca2e92ad4e1d855883831978ffaa2976834ea2eb043",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -176,4 +216,4 @@ "visibility": { "public": true }-}+}