component
M95640-RMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM95640-RMN6TP
STMicroelectronics · EEPROM · SOIC-8
M95640-RMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Active-low Chip Select: high deselects the device and puts Q in high impedance (Standby Power mode unless a Write cycle is in progress), low selects it (Active Power mode), and a falling edge is required after power-up before any instruction. |
| 2 | Q | tri_state | Serial Data Output shifts data out on the falling edge of Serial Clock C and is high impedance when the device is deselected or in the Hold condition. |
| 3 | W | input | Write Protect input freezes the size of the memory area protected by the BP1 and BP0 bits; it must be driven high or low and be stable during all Write instructions. |
| 4 | VSS | power_in | Ground, the reference for all signals including the VCC supply voltage. |
| 5 | D | input | Serial Data Input receives instructions, addresses and data to be written, latched on the rising edge of Serial Clock C. |
| 6 | C | input | Serial Clock provides the timing of the serial interface, with input latched on the rising edge and output changing on the falling edge, up to 20 MHz. |
| 7 | HOLD | input | Active-low Hold input pauses serial communication without deselecting the device; during Hold, Q is high impedance and D and C are Don't Care. |
| 8 | VCC | power_in | Supply voltage, 1.8 V to 5.5 V for M95640-R, which must be stable and valid during operations and decoupled with 10 nF to 100 nF close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95640-RMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
m95640-rmn6tp-etched.step/m95640-rmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95640-rmn6tp.step/m95640-rmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (53 pp, sha256
6b136d5d2ea5ba78, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).