main
Ray
m95512-rmn6tp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
eaa68e1
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229
{
"schema_version": 1,
"type": "component",
"slug": "m95512-rmn6tp",
"title": "M95512-RMN6TP",
"brief": "STMicroelectronics EEPROM, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"memory",
"m95512-rmn6tp"
],
"component": {
"mpn": "M95512-RMN6TP",
"manufacturer": "STMicroelectronics",
"package": "SOIC-8",
"pin_count": 8,
"category": "Memory",
"subcategory": "EEPROM",
"datasheet": "https://www.st.com/resource/en/datasheet/m95512-rmn6tp.pdf",
"parts": {
"symbol": "m95512-rmn6tp.kicad_sym",
"footprint": "m95512-rmn6tp.kicad_mod",
"model_3d": "m95512-rmn6tp-etched.glb",
"model_3d_plain": "m95512-rmn6tp.glb",
"model_3d_step": "m95512-rmn6tp-etched.step",
"model_3d_step_plain": "m95512-rmn6tp.step",
"lbr": "m95512-rmn6tp.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "S",
"type": "input",
"description": "Chip Select (active low). Driving S low selects the device and places it in Active Power mode; when S is high the device is deselected, Q goes high-impedance, and the device enters Standby Power mode (unless an internal write cycle is in progress). A falling edge on S is required after power-up before any instruction."
},
{
"number": "2",
"name": "Q",
"type": "output",
"description": "Serial Data Output (MISO). Data is shifted out on the falling edge of Serial Clock (C). Output is high-impedance when the device is deselected or held."
},
{
"number": "3",
"name": "W",
"type": "input",
"description": "Write Protect (active low). When W is driven low with SRWD=1 in the Status Register, the Status Register is hardware-write-protected, freezing the currently configured protected memory area. Tie to VCC through a pull-up if unused."
},
{
"number": "4",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for all signals and supply."
},
{
"number": "5",
"name": "D",
"type": "input",
"description": "Serial Data Input (MOSI). Instructions, addresses, and write data are latched on the rising edge of Serial Clock (C)."
},
{
"number": "6",
"name": "C",
"type": "input",
"description": "Serial Clock (SCK). Provides the timing for the serial interface: D is latched on the rising edge and Q changes on the falling edge. Supports SPI Modes 0 and 3, up to 16 MHz."
},
{
"number": "7",
"name": "HOLD",
"type": "input",
"description": "Hold input (active low). Pauses any serial communication with the device without deselecting it; while HOLD is asserted, Q is high-impedance and D and C are Don't Care. Tie high (to VCC) through a pull-up if unused."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage. For the M95512-R variant, VCC = 1.8 V to 5.5 V. A 100 nF decoupling capacitor between VCC and VSS is recommended."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://www.st.com/resource/en/datasheet/m95512-rmn6tp.pdf",
"pages": 50,
"sha256": "b37ea33905d9cf57",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "m95512-rmn6tp.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "m95512-rmn6tp-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "08e2c48edc968659b87831c7960141d3fcc06d81895c932bd0b3753d1c09b549",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "STMicroelectronics",
"Package": "SOIC-8",
"Category": "Memory",
"Pins": "8"
}
},
"variants": [
{
"mpn": "M95512-RMN6TP",
"kind": "packaging"
},
{
"mpn": "M95512-RMN6P",
"kind": "unknown"
},
{
"mpn": "M95512-RMN6TPWMN6TP",
"kind": "packaging"
},
{
"mpn": "M95512-RMN6TPWMN6P",
"kind": "packaging"
},
{
"mpn": "M95512-RMN6TPRDW6TP",
"kind": "packaging"
},
{
"mpn": "M95512-RMN6TPWDW6TP",
"kind": "packaging"
},
{
"mpn": "M95512-RMN6TPRMC6TP",
"kind": "packaging"
},
{
"mpn": "M95512-RMN6TPWMC6TP",
"kind": "packaging"
},
{
"mpn": "M95512-RMN6TPDFMC6TP",
"kind": "packaging"
},
{
"mpn": "M95512-RMN6TPDFCS6TP/K",
"kind": "packaging"
}
],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"m95512-rmn6tp"
],
"discovery_pitch": "M95512-RMN6TP (STMicroelectronics) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"m95512-rmn6tp.kicad_sym",
"m95512-rmn6tp.kicad_mod",
"m95512-rmn6tp.glb",
"m95512-rmn6tp.step",
"m95512-rmn6tp.lbr",
"docs/hero.png",
"docs/m95512-rmn6tp-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"updated_at": "2026-09-28T18:24:13.534Z"
}