M95512-DFMN6TP

{
  "slug": "m95512-dfmn6tp",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "m95512-dfmn6tp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "m95512-dfmn6tp.kicad_sym",
    "m95512-dfmn6tp.kicad_mod",
    "m95512-dfmn6tp.glb",
    "m95512-dfmn6tp.step",
    "m95512-dfmn6tp.lbr",
    "docs/hero.png",
    "docs/m95512-dfmn6tp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "m95512-dfmn6tp-hero.glb",
    "m95512-dfmn6tp-hero.overlay.json"
  ],
  "component": {
    "mpn": "M95512-DFMN6TP",
    "manufacturer": "STMicroelectronics",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589828441974874112",
    "parts": {
      "symbol": "m95512-dfmn6tp.kicad_sym",
      "footprint": "m95512-dfmn6tp.kicad_mod",
      "model_3d": "m95512-dfmn6tp-hero.glb",
      "model_3d_plain": "m95512-dfmn6tp.glb",
      "model_3d_step": "m95512-dfmn6tp-etched.step",
      "model_3d_step_plain": "m95512-dfmn6tp.step",
      "lbr": "m95512-dfmn6tp.lbr"
    },
    "distributor_links": {
      "lcsc": "C2062200",
      "digikey": "497-15779-2-ND",
      "mouser": "511-M95512-DFMN6TP"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T01:56:54Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-15779-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-M95512-DFMN6TP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "S",
        "type": "input",
        "description": "Chip select; driving it high deselects the device and puts Q in high impedance (Standby Power mode unless a Write cycle is in progress), and driving it low selects the device (Active Power mode)."
      },
      {
        "number": "2",
        "name": "Q",
        "type": "output",
        "description": "Serial data output; data is shifted out on the falling edge of Serial clock (C) and Q is high impedance when the device is deselected or in the Hold condition."
      },
      {
        "number": "3",
        "name": "W",
        "type": "input",
        "description": "Write protect; freezes the size of the memory area protected by the BP1 and BP0 bits, must be driven high or low and be stable during all Write instructions."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground; the reference for all signals, including the VCC supply voltage."
      },
      {
        "number": "5",
        "name": "D",
        "type": "input",
        "description": "Serial data input; receives instructions, addresses and data to be written, latched on the rising edge of Serial clock (C)."
      },
      {
        "number": "6",
        "name": "C",
        "type": "input",
        "description": "Serial clock; provides the timing of the serial interface, with inputs latched on the rising edge and output data changing from the falling edge, up to 16 MHz."
      },
      {
        "number": "7",
        "name": "HOLD",
        "type": "input",
        "description": "Hold; pauses serial communication without deselecting the device, during which Q is high impedance and D and C are Don't Care."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage; 1.7 V to 5.5 V for M95512-DF, to be held stable and valid during operation and decoupled with 10 to 100 nF close to the VCC/VSS pins."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: SO8 package pin assignments (pins 1-8 to signal names) should be verified against Figure 2 (page 7) "
        ],
        "pages_sent": 22,
        "cost_usd": 0.4707,
        "at": "2026-10-07T01:56:37"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589828441974874112",
        "pages": 54,
        "sha256": "46546a73b781e404",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "m95512-dfmn6tp.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "m95512-dfmn6tp-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "671b117c7cf9ac22e4bb9c30159146dccfe8d6dbb9d90d026d4cf8fe63db03e4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}