Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

M95320-DWDW4TP

STMicroelectronics · EEPROM · TSSOP-8

M95320-DWDW4TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S input Chip Select: driving it low selects the device and starts communication, driving it high deselects the device and puts Q in high impedance.
2 Q tri_state Serial Data output: shifts data out on the falling edge of C, MSB first, and is high impedance in all other cases.
3 W input Write Protect: used to write-protect the Status Register.
4 VSS power_in Ground: the reference for all signals, including the VCC supply voltage.
5 D input Serial Data input: receives instructions, addresses and data to be written, latched on the rising edge of C, MSB first.
6 C input Serial Clock: synchronizes the serial interface, with inputs latched on the rising edge and Q changing after the falling edge, up to 20 MHz for VCC ≥ 4.5 V.
7 HOLD input Hold: pauses serial communication without deselecting the device or resetting the clocking sequence, and Hold mode starts when HOLD is driven low while C is low.
8 VCC power_in Supply voltage: 2.5 V to 5.5 V for the W voltage range with grade 4 (-40 to 145 °C), decoupled with 10 nF to 100 nF close to the VCC/VSS pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TSTG -65 150 °C 29
Ambient operating temperature TAMR -40 150 °C 29
Voltage on Q pin VO -0.5 V 29
Input voltage VI -0.5 6.5 V 29
DC output current (Q = 0) IOL 5 mA Q = 0 29
DC output current (Q = 1) IOH 5 mA Q = 1 29
Supply voltage VCC -0.5 6.5 V 29
Electrostatic pulse (Human Body Model) VESD 4000 V Human Body Model, AEC-Q100-002 29
Write cycle endurance Ncycle 4e+06 TA ≤ 25 °C, 1.7 V < VCC < 5.5 V 30
Write cycle endurance Ncycle 1.2e+06 TA = 85 °C, 1.7 V < VCC < 5.5 V 30
Write cycle endurance Ncycle 600000 TA = 125 °C, 1.7 V < VCC < 5.5 V 30
Write cycle endurance Ncycle 400000 TA = 145 °C, 2.5 V < VCC < 5.5 V 30
Supply voltage (voltage range W) VCC 2.5 5.5 V 30
Ambient operating temperature (temperature range 4) TA -40 145 °C 30
Operating clock frequency fC 10 MHz 5.5 V ≥ VCC ≥ 2.5 V, capacitive load on Q pin ≤100pF 30
Output capacitance (Q) COUT 8 pF VOUT = 0 V 31
Input capacitance CIN 6 pF VIN = 0 V 31
Input leakage current ILI 2 µA VIN = VSS or VCC 31
Output leakage current ILO 3 µA S = VCC, VOUT = VSS or VCC 31
Supply current (Read) ICC 2 mA VCC = 2.5 V, fC = 10 MHz, C = 0.1 VCC/0.9 VCC, Q = open 31
Supply current (Read) ICC 4 mA VCC = 5.5 V, fC = 10 MHz, C = 0.1 VCC/0.9 VCC, Q = open 31
Supply current (Write) ICC0 2 mA 2.5 V < VCC < 5.5 V during tW, S = VCC 31
Supply current (Standby power mode) ICC1 2 µA t° = 85 °C, VCC = 2.5 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby power mode) ICC1 3 µA t° = 85 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby power mode) ICC1 15 µA t° = 125 °C, VCC = 2.5 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby power mode) ICC1 20 µA t° = 125 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby power mode) ICC1 25 µA t° = 145 °C, VCC = 2.5 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby power mode) ICC1 40 µA t° = 145 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC 31
Input low voltage VIL -0.45 V 31
Output low voltage VOL 0.4 V IOL = 2 mA 31
Internal reset threshold voltage VRES 0.5 1.5 V 31
Clock frequency fC 10 MHz Table 10 and Table 11 test conditions 33
S active setup time tSLCH 30 ns Table 10 and Table 11 test conditions 33
S not active setup time tSHCH 30 ns Table 10 and Table 11 test conditions 33
S deselect time tSHSL 40 ns Table 10 and Table 11 test conditions 33
S active hold time tCHSH 30 ns Table 10 and Table 11 test conditions 33
S not active hold time tCHSL 30 ns Table 10 and Table 11 test conditions 33
Clock high time tCH 40 ns Table 10 and Table 11 test conditions 33
Clock low time tCL 40 ns Table 10 and Table 11 test conditions 33
Clock rise time tCLCH 2 µs Table 10 and Table 11 test conditions 33
Clock fall time tCHCL 2 µs Table 10 and Table 11 test conditions 33
Data in setup time tDVCH 10 ns Table 10 and Table 11 test conditions 33
Data in hold time tCHDX 10 ns Table 10 and Table 11 test conditions 33
Clock low hold time after HOLD not active tHHCH 30 ns Table 10 and Table 11 test conditions 33
Clock low hold time after HOLD active tHLCH 30 ns Table 10 and Table 11 test conditions 33
Clock low set-up time before HOLD active tCLHL 0 ns Table 10 and Table 11 test conditions 33
Clock low set-up time before HOLD not active tCLHH 0 ns Table 10 and Table 11 test conditions 33
Output disable time tSHQZ 40 ns Table 10 and Table 11 test conditions 33
Clock low to output valid tCLQV 40 ns Table 10 and Table 11 test conditions 33
Output hold time tCLQX 0 ns Table 10 and Table 11 test conditions 33
Output rise time tQLQH 20 ns Table 10 and Table 11 test conditions 33
Output fall time tQHQL 20 ns Table 10 and Table 11 test conditions 33
HOLD high to output valid tHHQV 40 ns Table 10 and Table 11 test conditions 33
HOLD low to output high-Z tHLQZ 40 ns Table 10 and Table 11 test conditions 33
Write time tW 4 ms Table 10 and Table 11 test conditions 33

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin TLEAD Lead temperature during soldering See note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST ECOPACK® 29

CAD (KiCad official)

  • Symbol: M95320-DWDW4TP
  • Footprint: Package_SO:TSSOP-8_4.4x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: m95320-dwdw4tp-k-etched.step / m95320-dwdw4tp-k-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m95320-dwdw4tp-k.step / m95320-dwdw4tp-k.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (43 pp, sha256 d3f07425143b30ae, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF