main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers m95160-drmn3tp-k: viewers rendered from the public page · Ray
m95160-drmn3tp-k-etched.glb Publish 0.1.0 · Ray
m95160-drmn3tp-k-etched.step m95160-drmn3tp-k: factory component page (tier=lcsc) · Ray
m95160-drmn3tp-k-hero.glb m95160-drmn3tp-k: hero GLB from the etched model (keeps the MPN mark) · Ray
m95160-drmn3tp-k-hero.overlay.json Publish 0.1.1 · Ray
m95160-drmn3tp-k.glb Publish 0.1.0 · Ray
m95160-drmn3tp-k.kicad_mod Publish 0.1.0 · Ray
m95160-drmn3tp-k.kicad_sym Publish 0.1.0 · Ray
m95160-drmn3tp-k.lbr Publish 0.1.1 · Ray
m95160-drmn3tp-k.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.1 · Ray
verification.json Verified: Rebuilt by the parts factory: tier lcsc, 8 pins · Ray

M95160-DRMN3TP

STMicroelectronics · EEPROM · SO-8

M95160-DRMN3TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S input Chip Select: driving it low selects the device and starts communication, and driving it high deselects the device and puts Q in high impedance.
2 Q tri_state Serial Data output: shifts data out on the falling edge of C, MSB first, during a Read, and is high impedance in all other cases.
3 W input Write Protect: write-protects the Status Register in conjunction with the SRWD bit.
4 VSS power_in Ground: the reference for all signals, including the VCC supply voltage.
5 D input Serial Data input: receives instructions, addresses and data to be written, latched on the rising edge of C, MSB first.
6 C input Serial Clock: synchronizes the serial interface, latching inputs on D on the rising edge, with Q changing after the falling edge, up to 20 MHz.
7 HOLD input Hold: pauses serial communication without deselecting the device or resetting the clocking sequence, and the Hold mode starts when HOLD is low and C is low.
8 VCC power_in Supply voltage: 1.7 V to 5.5 V for voltage range R, with a 10 nF to 100 nF decoupling capacitor recommended close to the VCC/VSS pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TSTG -65 150 °C 28
Ambient operating temperature TAMR -40 150 °C 28
Voltage on Q pin VO -0.5 V 28
Input voltage VI -0.5 6.5 V 28
DC output current (Q = 0) IOL 5 mA Q = 0 28
DC output current (Q = 1) IOH 5 mA Q = 1 28
Supply voltage VCC -0.5 6.5 V 28
Electrostatic pulse (Human Body Model) VESD 4000 V Human Body Model, AEC-Q100-002 28
Supply voltage VCC 1.7 5.5 V Voltage range R, temperature range 3 29
Ambient operating temperature TA -40 125 °C Voltage range R, temperature range 3 29
Operating clock frequency fC 10 MHz VCC ≥ 2.5 V, capacitive load on Q pin ≤100pF 29
Operating clock frequency fC 5 MHz VCC ≥ 1.7 V, capacitive load on Q pin ≤100pF 29
Supply voltage (high-speed communications) VCC 4.5 5.5 V High-speed communications 29
Ambient operating temperature (high-speed communications) TA -40 85 °C High-speed communications 29
Operating clock frequency (high-speed communications) fC 20 MHz VCC ≥ 4.5 V, capacitive load on Q pin ≤ 60 pF 29
Output capacitance (Q) COUT 8 pF VOUT = 0 V 31
Input capacitance CIN 6 pF VIN = 0 V 31
Input leakage current ILI 2 µA VIN = VSS or VCC 31
Output leakage current ILO 3 µA S = VCC, VOUT = VSS or VCC 31
Supply current (Read) ICC 2 mA VCC = 1.7 V, C = 0.1 VCC/0.9 VCC, Q = open, fC = 5 MHz 31
Supply current (Read) ICC 5 mA VCC = 5.5 V, fC = 20 MHz, C = 0.1 VCC/0.9 VCC, Q = open 31
Supply current (Write) ICC0 2 mA 1.7 V ≤ VCC < 5.5 V during tW, S = VCC; average value during Write cycle 31
Supply current (Standby mode) ICC1 1 µA 85 °C, VCC = 1.7 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby mode) ICC1 2 µA 85 °C, VCC = 2.5 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby mode) ICC1 3 µA 85 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby mode) ICC1 15 µA 125 °C, VCC = 1.7 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby mode) ICC1 20 µA 125 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC 31
Input low voltage VIL -0.45 V 1.7 V ≤ VCC < 2.5 V 31
Output low voltage VOL 0.3 V VCC = 1.7 V, IOL = 1 mA 31
Output low voltage VOL 0.4 V VCC ≥ 2.5 V, IOL = 2 mA 31
Internal reset threshold voltage VRES 0.5 1.5 V 31
Clock frequency fC 5 MHz Test conditions specified in Table 11 32
S active setup time tSLCH 60 ns Test conditions specified in Table 11 32
S not active setup time tSHCH 60 ns Test conditions specified in Table 11 32
S deselect time tSHSL 90 ns Test conditions specified in Table 11 32
S active hold time tCHSH 60 ns Test conditions specified in Table 11 32
S not active hold time tCHSL 60 ns Test conditions specified in Table 11 32
Clock high time tCH 80 ns Test conditions specified in Table 11 32
Clock low time tCL 80 ns Test conditions specified in Table 11 32
Clock rise time tCLCH 2 µs Test conditions specified in Table 11 32
Clock fall time tCHCL 2 µs Test conditions specified in Table 11 32
Data in setup time tDVCH 20 ns Test conditions specified in Table 11 32
Data in hold time tCHDX 20 ns Test conditions specified in Table 11 32
Clock low hold time after HOLD not active tHHCH 60 ns Test conditions specified in Table 11 32
Clock low hold time after HOLD active tHLCH 60 ns Test conditions specified in Table 11 32
Clock low set-up time before HOLD active tCLHL 0 ns Test conditions specified in Table 11 32
Clock low set-up time before HOLD not active tCLHH 0 ns Test conditions specified in Table 11 32
Output disable time tSHQZ 80 ns Test conditions specified in Table 11 32
Clock low to output valid tCLQV 80 ns Test conditions specified in Table 11 32
Output hold time tCLQX 0 ns Test conditions specified in Table 11 32
Output rise time tQLQH 20 ns Test conditions specified in Table 11 32
Output fall time tQHQL 20 ns Test conditions specified in Table 11 32
HOLD high to output valid tHHQV 80 ns Test conditions specified in Table 11 32
HOLD low to output high-Z tHLQZ 80 ns Test conditions specified in Table 11 32
Write time tW 4 ms Test conditions specified in Table 11 32

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin TLEAD Lead temperature during soldering See note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST ECOPACK® 28

CAD (KiCad official)

  • Symbol: M95160-DRMN3TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: m95160-drmn3tp-k-etched.step / m95160-drmn3tp-k-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m95160-drmn3tp-k.step / m95160-drmn3tp-k.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (43 pp, sha256 49916e39586de793, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF