← Commit history
README.md+52−54
@@ -8,14 +8,14 @@ M95160-DRMN3TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions e  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | S | input | Chip Select: driving it low selects the device and starts communication, driving it high deselects the device and puts Q in high impedance. |-| 2 | Q | tri_state | Serial Data output: data is shifted out on the falling edge of C, MSB first, during a Read, and Q is high impedance in all other cases. |-| 3 | W | input | Write Protect: used to write-protect the Status Register. |+| 1 | S | input | Chip Select: driving it low selects the device and starts communication, and driving it high deselects the device and puts Q in high impedance. |+| 2 | Q | tri_state | Serial Data output: shifts data out on the falling edge of C, MSB first, during a Read, and is high impedance in all other cases. |+| 3 | W | input | Write Protect: write-protects the Status Register in conjunction with the SRWD bit. | | 4 | VSS | power_in | Ground: the reference for all signals, including the VCC supply voltage. | | 5 | D | input | Serial Data input: receives instructions, addresses and data to be written, latched on the rising edge of C, MSB first. |-| 6 | C | input | Serial Clock: synchronizes the serial interface, with inputs latched on the rising edge and Q changing after the falling edge, up to 20 MHz for VCC ≥ 4.5 V. |-| 7 | HOLD | input | Hold: pauses serial communication without deselecting the device or resetting the clocking sequence, and starts when driven low while C is low. |-| 8 | VCC | power_in | Supply voltage: 1.7 V to 5.5 V for voltage range R (the MPN's 'R' option), and a 10 nF to 100 nF decoupling capacitor is recommended close to VCC/VSS. |+| 6 | C | input | Serial Clock: synchronizes the serial interface, latching inputs on D on the rising edge, with Q changing after the falling edge, up to 20 MHz. |+| 7 | HOLD | input | Hold: pauses serial communication without deselecting the device or resetting the clocking sequence, and the Hold mode starts when HOLD is low and C is low. |+| 8 | VCC | power_in | Supply voltage: 1.7 V to 5.5 V for voltage range R, with a 10 nF to 100 nF decoupling capacitor recommended close to the VCC/VSS pins. |  ## Key specifications @@ -32,63 +32,61 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage | VCC | 1.7 |  | 5.5 | V | Table 11, voltage range R, temperature range 3 | 29 |-| Ambient operating temperature | TA | -40 |  | 125 | °C | Table 11, voltage range R, temperature range 3 | 29 |+| Storage temperature | TSTG | -65 |  | 150 | °C |  | 28 |+| Ambient operating temperature | TAMR | -40 |  | 150 | °C |  | 28 |+| Voltage on Q pin | VO | -0.5 |  |  | V |  | 28 |+| Input voltage | VI | -0.5 |  | 6.5 | V |  | 28 |+| DC output current (Q = 0) | IOL |  |  | 5 | mA | Q = 0 | 28 |+| DC output current (Q = 1) | IOH |  |  | 5 | mA | Q = 1 | 28 |+| Supply voltage | VCC | -0.5 |  | 6.5 | V |  | 28 |+| Electrostatic pulse (Human Body Model) | VESD |  |  | 4000 | V | Human Body Model, AEC-Q100-002 | 28 |+| Supply voltage | VCC | 1.7 |  | 5.5 | V | Voltage range R, temperature range 3 | 29 |+| Ambient operating temperature | TA | -40 |  | 125 | °C | Voltage range R, temperature range 3 | 29 | | Operating clock frequency | fC |  |  | 10 | MHz | VCC ≥ 2.5 V, capacitive load on Q pin ≤100pF | 29 | | Operating clock frequency | fC |  |  | 5 | MHz | VCC ≥ 1.7 V, capacitive load on Q pin ≤100pF | 29 |+| Supply voltage (high-speed communications) | VCC | 4.5 |  | 5.5 | V | High-speed communications | 29 |+| Ambient operating temperature (high-speed communications) | TA | -40 |  | 85 | °C | High-speed communications | 29 |+| Operating clock frequency (high-speed communications) | fC |  |  | 20 | MHz | VCC ≥ 4.5 V, capacitive load on Q pin ≤ 60 pF | 29 | | Output capacitance (Q) | COUT |  |  | 8 | pF | VOUT = 0 V | 31 | | Input capacitance | CIN |  |  | 6 | pF | VIN = 0 V | 31 | | Input leakage current | ILI |  |  | 2 | µA | VIN = VSS or VCC | 31 | | Output leakage current | ILO |  |  | 3 | µA | S = VCC, VOUT = VSS or VCC | 31 | | Supply current (Read) | ICC |  |  | 2 | mA | VCC = 1.7 V, C = 0.1 VCC/0.9 VCC, Q = open, fC = 5 MHz | 31 |-| Supply current (Read) | ICC |  |  | 5 | mA | VCC = 5.5 V, fC = 20 MHz, C = 0.1 VCC/0.9 VCC, Q = open; note 1: -40 °C < t° < 85 °C | 31 |-| Supply current (Write) | ICC0 |  |  | 2 | mA | 1.7 V ≤ VCC < 5.5 V during tW, S = VCC; average value during Write cycle (tW); characterized only | 31 |-| Supply current (Standby mode) | ICC1 |  |  | 1 | µA | t° = 85 °C, VCC = 1.7 V, S = VCC, VIN = VSS or VCC | 31 |-| Supply current (Standby mode) | ICC1 |  |  | 2 | µA | t° = 85 °C, VCC = 2.5 V, S = VCC, VIN = VSS or VCC | 31 |-| Supply current (Standby mode) | ICC1 |  |  | 3 | µA | t° = 85 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC | 31 |-| Supply current (Standby mode) | ICC1 |  |  | 15 | µA | t° = 125 °C, VCC = 1.7 V, S = VCC, VIN = VSS or VCC | 31 |-| Supply current (Standby mode) | ICC1 |  |  | 20 | µA | t° = 125 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC | 31 |-| Input low voltage | VIL | -0.45 |  | 0.25 | V | 1.7 V ≤ VCC < 2.5 V; max printed as 0.25 VCC | 31 |-| Input low voltage | VIL | -0.45 |  | 0.3 | V | 2.5 V ≤ VCC < 5.5 V; max printed as 0.3 VCC | 31 |-| Input high voltage | VIH | 0.75 |  |  | V | 1.7 V ≤ VCC < 2.5 V; min printed as 0.75 VCC; max printed as VCC+1 | 31 |-| Input high voltage | VIH | 0.7 |  |  | V | 2.5 V ≤ VCC < 5.5 V; min printed as 0.7 VCC; max printed as VCC+1 | 31 |+| Supply current (Read) | ICC |  |  | 5 | mA | VCC = 5.5 V, fC = 20 MHz, C = 0.1 VCC/0.9 VCC, Q = open | 31 |+| Supply current (Write) | ICC0 |  |  | 2 | mA | 1.7 V ≤ VCC < 5.5 V during tW, S = VCC; average value during Write cycle | 31 |+| Supply current (Standby mode) | ICC1 |  |  | 1 | µA | 85 °C, VCC = 1.7 V, S = VCC, VIN = VSS or VCC | 31 |+| Supply current (Standby mode) | ICC1 |  |  | 2 | µA | 85 °C, VCC = 2.5 V, S = VCC, VIN = VSS or VCC | 31 |+| Supply current (Standby mode) | ICC1 |  |  | 3 | µA | 85 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC | 31 |+| Supply current (Standby mode) | ICC1 |  |  | 15 | µA | 125 °C, VCC = 1.7 V, S = VCC, VIN = VSS or VCC | 31 |+| Supply current (Standby mode) | ICC1 |  |  | 20 | µA | 125 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC | 31 |+| Input low voltage | VIL | -0.45 |  |  | V | 1.7 V ≤ VCC < 2.5 V | 31 | | Output low voltage | VOL |  |  | 0.3 | V | VCC = 1.7 V, IOL = 1 mA | 31 | | Output low voltage | VOL |  |  | 0.4 | V | VCC ≥ 2.5 V, IOL = 2 mA | 31 |-| Output high voltage | VOH | 0.8 |  |  | V | VCC = 1.7 V, IOH = 1 mA; min printed as 0.8 VCC | 31 |-| Internal reset threshold voltage | VRES | 0.5 |  | 1.5 | V | characterized only, not 100% tested | 31 |-| Serial clock frequency | fC |  |  | 5 | MHz | test conditions per Table 11 | 32 |-| S active setup time | tSLCH | 60 |  |  | ns | test conditions per Table 11 | 32 |-| S not active setup time | tSHCH | 60 |  |  | ns | test conditions per Table 11 | 32 |-| S deselect time | tSHSL | 90 |  |  | ns | test conditions per Table 11 | 32 |-| S active hold time | tCHSH | 60 |  |  | ns | test conditions per Table 11 | 32 |-| S not active hold time | tCHSL | 60 |  |  | ns | test conditions per Table 11 | 32 |-| Clock high time | tCH | 80 |  |  | ns | test conditions per Table 11 | 32 |-| Clock low time | tCL | 80 |  |  | ns | test conditions per Table 11 | 32 |-| Clock rise time | tCLCH |  |  | 2 | µs | test conditions per Table 11; characterized only | 32 |-| Clock fall time | tCHCL |  |  | 2 | µs | test conditions per Table 11; characterized only | 32 |-| Data in setup time | tDVCH | 20 |  |  | ns | test conditions per Table 11 | 32 |-| Data in hold time | tCHDX | 20 |  |  | ns | test conditions per Table 11 | 32 |-| Clock low hold time after HOLD not active | tHHCH | 60 |  |  | ns | test conditions per Table 11 | 32 |-| Clock low hold time after HOLD active | tHLCH | 60 |  |  | ns | test conditions per Table 11 | 32 |-| Output disable time | tSHQZ |  |  | 80 | ns | test conditions per Table 11; characterized only | 32 |-| Clock low to output valid | tCLQV |  |  | 80 | ns | test conditions per Table 11 | 32 |-| Output hold time | tCLQX | 0 |  |  | ns | test conditions per Table 11 | 32 |-| Output rise time | tQLQH |  |  | 20 | ns | test conditions per Table 11; characterized only | 32 |-| Output fall time | tQHQL |  |  | 20 | ns | test conditions per Table 11; characterized only | 32 |-| HOLD high to output valid | tHHQV |  |  | 80 | ns | test conditions per Table 11 | 32 |-| HOLD low to output high-Z | tHLQZ |  |  | 80 | ns | test conditions per Table 11; characterized only | 32 |-| Write time | tW |  |  | 4 | ms | test conditions per Table 11 | 32 |-| Storage temperature | TSTG | -65 |  | 150 | °C |  | 28 |-| Ambient operating temperature (absolute maximum) | TAMR | -40 |  | 150 | °C |  | 28 |-| Voltage on Q pin | VO | -0.5 |  |  | V | max printed as VCC+0.6 | 28 |-| Input voltage | VI | -0.5 |  | 6.5 | V |  | 28 |-| DC output current (Q = 0) | IOL |  |  | 5 | mA | Q = 0 | 28 |-| DC output current (Q = 1) | IOH |  |  | 5 | mA | Q = 1 | 28 |-| Supply voltage (absolute maximum) | VCC | -0.5 |  | 6.5 | V |  | 28 |-| Electrostatic pulse (Human Body Model) | VESD |  |  | 4000 | V | AEC-Q100-002, C1=100 pF, R1=1500 Ω, R2=500 Ω | 28 |-| Write cycle endurance | Ncycle |  |  | 4e+06 |  | TA ≤ 25 °C, 1.7 V < VCC < 5.5 V | 29 |-| Write cycle endurance | Ncycle |  |  | 1.2e+06 |  | TA = 85 °C, 1.7 V < VCC < 5.5 V | 29 |-| Write cycle endurance | Ncycle |  |  | 600000 |  | TA = 125 °C, 1.7 V < VCC < 5.5 V | 29 |+| Internal reset threshold voltage | VRES | 0.5 |  | 1.5 | V |  | 31 |+| Clock frequency | fC |  |  | 5 | MHz | Test conditions specified in Table 11 | 32 |+| S active setup time | tSLCH | 60 |  |  | ns | Test conditions specified in Table 11 | 32 |+| S not active setup time | tSHCH | 60 |  |  | ns | Test conditions specified in Table 11 | 32 |+| S deselect time | tSHSL | 90 |  |  | ns | Test conditions specified in Table 11 | 32 |+| S active hold time | tCHSH | 60 |  |  | ns | Test conditions specified in Table 11 | 32 |+| S not active hold time | tCHSL | 60 |  |  | ns | Test conditions specified in Table 11 | 32 |+| Clock high time | tCH | 80 |  |  | ns | Test conditions specified in Table 11 | 32 |+| Clock low time | tCL | 80 |  |  | ns | Test conditions specified in Table 11 | 32 |+| Clock rise time | tCLCH |  |  | 2 | µs | Test conditions specified in Table 11 | 32 |+| Clock fall time | tCHCL |  |  | 2 | µs | Test conditions specified in Table 11 | 32 |+| Data in setup time | tDVCH | 20 |  |  | ns | Test conditions specified in Table 11 | 32 |+| Data in hold time | tCHDX | 20 |  |  | ns | Test conditions specified in Table 11 | 32 |+| Clock low hold time after HOLD not active | tHHCH | 60 |  |  | ns | Test conditions specified in Table 11 | 32 |+| Clock low hold time after HOLD active | tHLCH | 60 |  |  | ns | Test conditions specified in Table 11 | 32 |+| Clock low set-up time before HOLD active | tCLHL | 0 |  |  | ns | Test conditions specified in Table 11 | 32 |+| Clock low set-up time before HOLD not active | tCLHH | 0 |  |  | ns | Test conditions specified in Table 11 | 32 |+| Output disable time | tSHQZ |  |  | 80 | ns | Test conditions specified in Table 11 | 32 |+| Clock low to output valid | tCLQV |  |  | 80 | ns | Test conditions specified in Table 11 | 32 |+| Output hold time | tCLQX | 0 |  |  | ns | Test conditions specified in Table 11 | 32 |+| Output rise time | tQLQH |  |  | 20 | ns | Test conditions specified in Table 11 | 32 |+| Output fall time | tQHQL |  |  | 20 | ns | Test conditions specified in Table 11 | 32 |+| HOLD high to output valid | tHHQV |  |  | 80 | ns | Test conditions specified in Table 11 | 32 |+| HOLD low to output high-Z | tHLQZ |  |  | 80 | ns | Test conditions specified in Table 11 | 32 |+| Write time | tW |  |  | 4 | ms | Test conditions specified in Table 11 | 32 |  ## Materials and finish 
m95160-drmn3tp-k-hero.overlay.json+258−256
@@ -1,260 +1,262 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "M95160-DRMN3TP/K",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 8,-      "span_mm": 6.9,-      "dash_mm": 0.1725,-      "gap_mm": 0.1035,-      "pad_stroke_mm": 0.0414-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 8,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }+ "spec": "adom-hero 1.4",+ "mpn": "M95160-DRMN3TP",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 8,+   "span_mm": 6.9,+   "dash_mm": 0.1725,+   "gap_mm": 0.1035,+   "pad_stroke_mm": 0.0414   },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.552,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.0,-      3.0,-      -2.11,-      2.11-    ],-    "pads_bbox_mm": [-      -3.45,-      3.45,-      -2.205,-      2.205-    ],-    "seating_z_mm": 0.0+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }   },-  "sources": {-    "glb": "m95160-drmn3tp-k-etched.glb",-    "glb_sha256": "d4178b475506c1ce20f926b491a838a2b502b466aef1f6967705c8139cf0c80b",-    "footprint": "m95160-drmn3tp-k.kicad_mod",-    "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",-    "pins": "page.json component.pins",-    "pins_sha256": "fc75ecb1640b498dc5e8799413d90c8e75a260fb982f7cb450c732f68ab3f8e8"-  },-  "generator": "adom-wiki 1.8.15 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "S",-      "x": -3.6,-      "y": -1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "Q",-      "x": -3.6,-      "y": -0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "W",-      "x": -3.6,-      "y": 0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "VSS",-      "x": -3.6,-      "y": 1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "D",-      "x": 3.6,-      "y": 1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "C",-      "x": 3.6,-      "y": 0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "HOLD",-      "x": 3.6,-      "y": -0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "VCC",-      "x": 3.6,-      "y": -1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 8,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.552,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.0,+   3.0,+   -2.11,+   2.11+  ],+  "pads_bbox_mm": [+   -3.45,+   3.45,+   -2.205,+   2.205   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "m95160-drmn3tp-k-etched.glb",+  "glb_sha256": "d4178b475506c1ce20f926b491a838a2b502b466aef1f6967705c8139cf0c80b",+  "footprint": "m95160-drmn3tp-k.kicad_mod",+  "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+  "pins": "page.json component.pins",+  "pins_sha256": "fc75ecb1640b498dc5e8799413d90c8e75a260fb982f7cb450c732f68ab3f8e8"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "S",+   "x": -3.6,+   "y": -1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "Q",+   "x": -3.6,+   "y": -0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "W",+   "x": -3.6,+   "y": 0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "VSS",+   "x": -3.6,+   "y": 1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "D",+   "x": 3.6,+   "y": 1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "C",+   "x": 3.6,+   "y": 0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "HOLD",+   "x": 3.6,+   "y": -0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "VCC",+   "x": 3.6,+   "y": -1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
m95160-drmn3tp-k.lbr+12−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>STMicroelectronics EEPROM, SO-8. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-8_3.9x4.9mm_P1.27mm">   <description>SOIC-8, 3.9 x 4.9 mm, 1.27 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="M95160-DRMN3TP">+  <description>STMicroelectronics EEPROM, SO-8. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -104,7 +105,7 @@ </symbols> <devicesets> <deviceset name="M95160-DRMN3TP" prefix="U">-  <description></description>+  <description>STMicroelectronics EEPROM, SO-8. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="M95160-DRMN3TP" x="0" y="0"/>   </gates>@@ -120,7 +121,15 @@         <connect gate="G$1" pin="C" pad="6"/>         <connect gate="G$1" pin="D" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="M95160-DRMN3TP/K" constant="no"/>+          <attribute name="MANUFACTURER" value="STMicroelectronics" constant="no"/>+          <attribute name="DATASHEET" value="https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588940367416995840" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/m95160-drmn3tp-k" constant="no"/>+          <attribute name="LCSC_PN" value="C2061532" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
package.json+15−14
@@ -1,6 +1,6 @@ {   "slug": "m95160-drmn3tp-k",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "STMicroelectronics EEPROM, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -52,11 +52,12 @@       "lcsc": "C2061532"     },     "distributor_check": {-      "checked_at": "2026-11-10T06:42:49Z",+      "checked_at": "2026-11-10T09:30:37Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,-        "status": "no match"+        "status": "deferred",+        "error": "shared DigiKey quota guard: 906 calls left today"       },       "mouser": {         "pn": null,@@ -68,19 +69,19 @@         "number": "1",         "name": "S",         "type": "input",-        "description": "Chip Select: driving it low selects the device and starts communication, driving it high deselects the device and puts Q in high impedance."+        "description": "Chip Select: driving it low selects the device and starts communication, and driving it high deselects the device and puts Q in high impedance."       },       {         "number": "2",         "name": "Q",         "type": "tri_state",-        "description": "Serial Data output: data is shifted out on the falling edge of C, MSB first, during a Read, and Q is high impedance in all other cases."+        "description": "Serial Data output: shifts data out on the falling edge of C, MSB first, during a Read, and is high impedance in all other cases."       },       {         "number": "3",         "name": "W",         "type": "input",-        "description": "Write Protect: used to write-protect the Status Register."+        "description": "Write Protect: write-protects the Status Register in conjunction with the SRWD bit."       },       {         "number": "4",@@ -98,19 +99,19 @@         "number": "6",         "name": "C",         "type": "input",-        "description": "Serial Clock: synchronizes the serial interface, with inputs latched on the rising edge and Q changing after the falling edge, up to 20 MHz for VCC ≥ 4.5 V."+        "description": "Serial Clock: synchronizes the serial interface, latching inputs on D on the rising edge, with Q changing after the falling edge, up to 20 MHz."       },       {         "number": "7",         "name": "HOLD",         "type": "input",-        "description": "Hold: pauses serial communication without deselecting the device or resetting the clocking sequence, and starts when driven low while C is low."+        "description": "Hold: pauses serial communication without deselecting the device or resetting the clocking sequence, and the Hold mode starts when HOLD is low and C is low."       },       {         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage: 1.7 V to 5.5 V for voltage range R (the MPN's 'R' option), and a 10 nF to 100 nF decoupling capacitor is recommended close to VCC/VSS."+        "description": "Supply voltage: 1.7 V to 5.5 V for voltage range R, with a 10 nF to 100 nF decoupling capacitor recommended close to the VCC/VSS pins."       }     ],     "provenance": {@@ -124,12 +125,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The MPN M95160-DRMN3TP decodes as voltage range R (1.7 to 5.5 V), package MN (SO8N, 150 mils), grade",+          "extractor flagged: The MPN M95160-DRMN3TP decodes as R = 1.7 to 5.5 V, MN = SO8 150 mil, grade 3 (-40 to 125 °C), T = t",           "vision extraction: provenance cannot be text-verified; needs consensus"         ],         "pages_sent": 43,-        "cost_usd": 0.4124,-        "at": "2026-11-10T06:42:35"+        "cost_usd": 0.4158,+        "at": "2026-11-10T09:30:26"       },       "datasheet": {         "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588940367416995840",@@ -184,13 +185,13 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "3c10a06a73983e188086ce12e3b51b550229404b5710bddfbfaddf5204fbe4d0",+        "sha256": "3fe14afb9838a5890c608a5265a885a3b3a109f3ca0557e721504b1a097ba580",         "checked": "2026-11-10",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "SO8N",+      "package_code": "SO8N (MN)",       "source_page": 35,       "D": {         "nom_mm": 4.9,
page.json+18−15
@@ -4,7 +4,7 @@   "slug": "m95160-drmn3tp-k",   "title": "M95160-DRMN3TP/K",   "brief": "STMicroelectronics EEPROM, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,11 +34,12 @@       "lcsc": "C2061532"     },     "distributor_check": {-      "checked_at": "2026-11-10T06:42:49Z",+      "checked_at": "2026-11-10T09:30:37Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,-        "status": "no match"+        "status": "deferred",+        "error": "shared DigiKey quota guard: 906 calls left today"       },       "mouser": {         "pn": null,@@ -50,19 +51,19 @@         "number": "1",         "name": "S",         "type": "input",-        "description": "Chip Select: driving it low selects the device and starts communication, driving it high deselects the device and puts Q in high impedance."+        "description": "Chip Select: driving it low selects the device and starts communication, and driving it high deselects the device and puts Q in high impedance."       },       {         "number": "2",         "name": "Q",         "type": "tri_state",-        "description": "Serial Data output: data is shifted out on the falling edge of C, MSB first, during a Read, and Q is high impedance in all other cases."+        "description": "Serial Data output: shifts data out on the falling edge of C, MSB first, during a Read, and is high impedance in all other cases."       },       {         "number": "3",         "name": "W",         "type": "input",-        "description": "Write Protect: used to write-protect the Status Register."+        "description": "Write Protect: write-protects the Status Register in conjunction with the SRWD bit."       },       {         "number": "4",@@ -80,19 +81,19 @@         "number": "6",         "name": "C",         "type": "input",-        "description": "Serial Clock: synchronizes the serial interface, with inputs latched on the rising edge and Q changing after the falling edge, up to 20 MHz for VCC ≥ 4.5 V."+        "description": "Serial Clock: synchronizes the serial interface, latching inputs on D on the rising edge, with Q changing after the falling edge, up to 20 MHz."       },       {         "number": "7",         "name": "HOLD",         "type": "input",-        "description": "Hold: pauses serial communication without deselecting the device or resetting the clocking sequence, and starts when driven low while C is low."+        "description": "Hold: pauses serial communication without deselecting the device or resetting the clocking sequence, and the Hold mode starts when HOLD is low and C is low."       },       {         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage: 1.7 V to 5.5 V for voltage range R (the MPN's 'R' option), and a 10 nF to 100 nF decoupling capacitor is recommended close to VCC/VSS."+        "description": "Supply voltage: 1.7 V to 5.5 V for voltage range R, with a 10 nF to 100 nF decoupling capacitor recommended close to the VCC/VSS pins."       }     ],     "provenance": {@@ -106,12 +107,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The MPN M95160-DRMN3TP decodes as voltage range R (1.7 to 5.5 V), package MN (SO8N, 150 mils), grade",+          "extractor flagged: The MPN M95160-DRMN3TP decodes as R = 1.7 to 5.5 V, MN = SO8 150 mil, grade 3 (-40 to 125 °C), T = t",           "vision extraction: provenance cannot be text-verified; needs consensus"         ],         "pages_sent": 43,-        "cost_usd": 0.4124,-        "at": "2026-11-10T06:42:35"+        "cost_usd": 0.4158,+        "at": "2026-11-10T09:30:26"       },       "datasheet": {         "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588940367416995840",@@ -166,13 +167,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "3c10a06a73983e188086ce12e3b51b550229404b5710bddfbfaddf5204fbe4d0",+        "sha256": "3fe14afb9838a5890c608a5265a885a3b3a109f3ca0557e721504b1a097ba580",         "checked": "2026-11-10",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "SO8N",+      "package_code": "SO8N (MN)",       "source_page": 35,       "D": {         "nom_mm": 4.9,@@ -968,5 +969,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "STMicroelectronics EEPROM, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file