main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers m95160-drdw3tp-k: viewers rendered from the public page · Ray
m95160-drdw3tp-k-etched.glb Publish 0.1.0 · Ray
m95160-drdw3tp-k-etched.step m95160-drdw3tp-k: factory component page (tier=lcsc) · Ray
m95160-drdw3tp-k-hero.glb m95160-drdw3tp-k: hero GLB from the etched model (keeps the MPN mark) · Ray
m95160-drdw3tp-k-hero.overlay.json Publish 0.1.0 · Ray
m95160-drdw3tp-k.glb Publish 0.1.0 · Ray
m95160-drdw3tp-k.kicad_mod Publish 0.1.0 · Ray
m95160-drdw3tp-k.kicad_sym Publish 0.1.0 · Ray
m95160-drdw3tp-k.lbr Publish 0.1.0 · Ray
m95160-drdw3tp-k.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

M95160-DRDW3TP

STMicroelectronics · EEPROM · TSSOP-8

M95160-DRDW3TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 S input Chip Select: driving S low selects the device and driving it high deselects the device, which puts Q in high impedance; after power-up the device is not selected until a falling edge is detected on S.
2 Q tri_state Serial data output: data is shifted out on the falling edge of C, MSB first, and Q is in high impedance in all other cases.
3 W input Write Protect: used to write-protect the Status Register, in conjunction with the SRWD bit; if W is tied permanently high the Status Register cannot be write-protected.
4 VSS power_in Ground: the reference for all signals, including the VCC supply voltage.
5 D input Serial data input: instructions, addresses and data to be written are latched on the rising edge of C, MSB first.
6 C input Serial clock: synchronizes the serial interface; data on D is latched on its rising edge and data on Q changes after its falling edge, with a maximum of 20 MHz for VCC ≥ 4.5 V.
7 HOLD input Hold: pauses serial communication without deselecting the device while HOLD is low and C is low; the device is not decoded during Hold mode.
8 VCC power_in Supply voltage: VCC must stay within the specified range (1.7 V to 5.5 V for voltage range R per Table 11) and be decoupled close to the VCC/VSS pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TSTG -65 150 °C 28
Ambient operating temperature (absolute maximum) TAMR -40 150 °C 28
Voltage on Q pin VO -0.5 V Printed max is VCC+0.6; not a fixed number 28
Input voltage VI -0.5 6.5 V 28
DC output current (Q = 0) IOL 5 mA Q = 0 28
DC output current (Q = 1) IOH 5 mA Q = 1 28
Supply voltage (absolute maximum) VCC -0.5 6.5 V 28
Electrostatic pulse (Human Body Model) VESD 4000 V Human Body Model, AEC-Q100-002 28
Write cycle endurance Ncycle 4e+06 Write cycle TA ≤ 25 °C, 1.7 V < VCC < 5.5 V 29
Write cycle endurance Ncycle 1.2e+06 Write cycle TA = 85 °C, 1.7 V < VCC < 5.5 V 29
Write cycle endurance Ncycle 600000 Write cycle TA = 125 °C, 1.7 V < VCC < 5.5 V 29
Supply voltage (voltage range R, temperature range 3) VCC 1.7 5.5 V 29
Ambient operating temperature (temperature range 3) TA -40 125 °C 29
Operating clock frequency fC 10 MHz VCC ≥ 2.5 V, capacitive load on Q pin ≤100pF 29
Operating clock frequency fC 5 MHz VCC ≥ 1.7 V, capacitive load on Q pin ≤100pF 29
Supply voltage (high-speed communications) VCC 4.5 5.5 V 29
Ambient operating temperature (high-speed communications) TA -40 85 °C 29
Operating clock frequency (high-speed communications) fC 20 MHz VCC ≥ 4.5 V, capacitive load on Q pin ≤ 60 pF 29
Output capacitance (Q) COUT 8 pF VOUT = 0 V (characterized only, not 100% tested) 31
Input capacitance CIN 6 pF VIN = 0 V (characterized only, not 100% tested) 31
Input leakage current ILI 2 µA VIN = VSS or VCC 31
Output leakage current ILO 3 µA S = VCC, VOUT = VSS or VCC 31
Supply current (Read) ICC 2 mA VCC = 1.7 V, C = 0.1 VCC/0.9 VCC, Q = open, fC = 5 MHz 31
Supply current (Read) ICC 5 mA VCC = 5.5 V, fC = 20 MHz, C = 0.1 VCC/0.9 VCC, Q = open; when -40 °C < t° < 85 °C 31
Supply current (Write) ICC0 2 mA 1.7 V ≤ VCC < 5.5 V during tW, S = VCC; average value during tW; characterized only 31
Supply current (Standby mode) ICC1 1 µA t° = 85 °C, VCC = 1.7 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby mode) ICC1 2 µA t° = 85 °C, VCC = 2.5 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby mode) ICC1 3 µA t° = 85 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby mode) ICC1 15 µA t° = 125 °C, VCC = 1.7 V, S = VCC, VIN = VSS or VCC 31
Supply current (Standby mode) ICC1 20 µA t° = 125 °C, VCC = 5.5 V, S = VCC, VIN = VSS or VCC 31
Input low voltage VIL -0.45 0.25 V 1.7 V ≤ VCC < 2.5 V 31
Input low voltage VIL -0.45 0.3 V 2.5 V ≤ VCC < 5.5 V 31
Input high voltage VIH 0.75 V 1.7 V ≤ VCC < 2.5 V; printed max is VCC+1 31
Input high voltage VIH 0.7 V 2.5 V ≤ VCC < 5.5 V; printed max is VCC+1 31
Output low voltage VOL 0.3 V VCC = 1.7 V, IOL = 1 mA 31
Output low voltage VOL 0.4 V VCC ≥ 2.5 V, IOL = 2 mA 31
Output high voltage VOH 0.8 V VCC = 1.7 V, IOH = 1 mA; printed min is 0.8 VCC 31
Internal reset threshold voltage VRES 0.5 1.5 V characterized only, not 100% tested 31
Clock high time tCH 80 ns Test conditions specified in Table 11 32
Clock high time tCH 40 ns Test conditions specified in Table 10 and Table 11 32
Clock high time tCH 20 ns Test conditions specified in Table 12 32
Data in setup time tDVCH 20 ns Test conditions specified in Table 11 32
Data in setup time tDVCH 10 ns Test conditions specified in Table 10 and Table 11 32
Data in setup time tDVCH 5 ns Test conditions specified in Table 12 32
Data in hold time tCHDX 20 ns Test conditions specified in Table 11 32
Data in hold time tCHDX 10 ns Test conditions specified in Table 10 and Table 11 32
Clock low to output valid tCLQV 80 ns Test conditions specified in Table 11 32
Clock low to output valid tCLQV 40 ns Test conditions specified in Table 10 and Table 11 32
Clock low to output valid tCLQV 20 ns Test conditions specified in Table 12 32
Output disable time tSHQZ 80 ns Test conditions specified in Table 11 32
Output disable time tSHQZ 40 ns Test conditions specified in Table 10 and Table 11 32
Output disable time tSHQZ 20 ns Test conditions specified in Table 12 32
Write time tW 4 ms Test conditions specified in Table 11 32

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin TLEAD Lead temperature during soldering See note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST ECOPACK® 28

CAD (KiCad official)

  • Symbol: M95160-DRDW3TP
  • Footprint: Package_SO:TSSOP-8_4.4x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: m95160-drdw3tp-k-etched.step / m95160-drdw3tp-k-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m95160-drdw3tp-k.step / m95160-drdw3tp-k.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (43 pp, sha256 49916e39586de793, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF