3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownM95128-DRMN3TP
STMicroelectronics · EEPROM · SOIC-8
M95128-DRMN3TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select input: driving S low selects the device and starts communication, and driving S high deselects it and puts Serial Data output Q in high impedance. |
| 2 | Q | tri_state | Serial data output that shifts data out on the falling edge of C, MSB first, and stays high impedance except during read operations; absolute maximum voltage on Q is VCC+0.6 V. |
| 3 | W | input | Write Protect input that, together with the SRWD bit, write-protects the Status Register and must be driven high or low; if permanently tied high the Status Register cannot be write-protected. |
| 4 | VSS | power_in | Ground, the reference for all signals including the VCC supply voltage. |
| 5 | D | input | Serial data input that receives instructions, addresses and write data, latched on the rising edge of C MSB first; absolute maximum input voltage is 6.5 V. |
| 6 | C | input | Serial clock input that latches D on its rising edge and changes Q after its falling edge; operating clock is up to 20 MHz for VCC ≥ 4.5 V. |
| 7 | HOLD | input | Hold input that pauses serial communication without deselecting the device; Hold mode starts when HOLD is driven low while C is low. |
| 8 | VCC | power_in | Supply voltage pin, 1.7 V to 5.5 V for voltage range R; decouple with about 10 nF to 100 nF close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95128-DRMN3TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
m95128-drmn3tp-etched.step/m95128-drmn3tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95128-drmn3tp.step/m95128-drmn3tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (43 pp, sha256
10e515896a515908, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).