Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
M95128-DRDW8TP
STMicroelectronics · EEPROM · TSSOP-8
M95128-DRDW8TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Active-low Chip Select: driving it low selects the device and starts communication, driving it high deselects the device and puts Q in high impedance; it should follow VCC during power-up via a pull-up resistor. |
| 2 | Q | output | Serial Data output that shifts data out on the falling edge of Serial Clock (C), MSB first, and is high impedance at all other times. |
| 3 | W | input | Active-low Write Protect pin that write-protects the Status Register (with SRWD=1, W low blocks WRSR) and must be driven high or low. |
| 4 | VSS | power_in | Ground, the reference for all signals including the VCC supply voltage. |
| 5 | D | input | Serial Data input that receives instructions, addresses and data to be written, latched on the rising edge of Serial Clock (C), MSB first. |
| 6 | C | input | Serial Clock input that synchronizes the serial interface, latching D on the rising edge and changing Q after the falling edge, up to 20 MHz for VCC ≥ 4.5 V, 10 MHz for VCC ≥ 2.5 V and 5 MHz for VCC ≥ 1.7 V. |
| 7 | HOLD | input | Active-low Hold input that pauses serial communication without deselecting the device or resetting the clocking sequence, and must be driven high or low. |
| 8 | VCC | power_in | Supply voltage pin, 1.7 V to 5.5 V operating range, to be decoupled with about 10 nF to 100 nF close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95128-DRDW8TP - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m95128-drdw8tp-etched.step/m95128-drdw8tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95128-drdw8tp.step/m95128-drdw8tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (42 pp, sha256
0c2c634eec00e9ab, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).