# M95080-WMN6TP

**STMicroelectronics** · EEPROM · SOIC-8

M95080-WMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select (active-low). Driving S low selects the device and places it in Active Power mode; high deselects the device, tri-states Q, and enters Standby Power mode. A falling edge on S is required prior to the start of any instruction after power-up. |
| 2 | Q | output | Serial Data Output (MISO). Shifts data serially out of the device on the falling edge of Serial Clock (C). High-impedance when S is high or during Hold. |
| 3 | W | input | Write Protect (active-low). When low, freezes the write-protected memory area defined by BP1/BP0 in the Status Register, preventing changes to those bits or protected memory. Must be driven high or low and remain stable during all Write instructions. |
| 4 | VSS | power_in | Ground reference for all signals including VCC. |
| 5 | D | input | Serial Data Input (MOSI). Receives instructions, addresses, and write data. Values are latched on the rising edge of Serial Clock (C). |
| 6 | C | input | Serial Clock input. Provides timing for the serial interface, up to 20 MHz. Data on D is latched on the rising edge; data on Q changes on the falling edge. Supports SPI modes 0 and 3. |
| 7 | HOLD | input | Hold input (active-low). Pauses serial communications without deselecting the device. During Hold, Q is high-impedance and D and C are Don't Care. Device must first be selected (S low) to start the Hold condition. |
| 8 | VCC | power_in | Supply voltage. M95080-W: 2.5 V to 5.5 V. Must be held stable within the specified valid range during all operations. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |

## Ordering variants

Same part, different packaging or reel option.

- `M95080-WMN6TP`
- `M95080-WMN6TPDW`
- `M95080-WMN6TPMC`

## CAD (KiCad official)

- Symbol: `M95080-WMN6TP`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `m95080-wmn6tp-etched.step` / `m95080-wmn6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m95080-wmn6tp.step` / `m95080-wmn6tp.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/m95080-wmn6tp.pdf) (44 pp, sha256 `ad27eb94b57233e1`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/m95080-wmn6tp-datasheet.pdf)