component
M95080-DRMN8TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM95080-DRMN8TP
STMicroelectronics · EEPROM · SO-8
M95080-DRMN8TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select input; driving it low selects the device to start communication and driving it high deselects the device, putting Serial Data output (Q) into high impedance. |
| 2 | Q | output | Serial Data output used to shift data out of the device on the falling edge of Serial Clock (C), MSB first; high impedance when not actively driving. |
| 3 | W | input | Write Protect input used together with the SRWD status register bit to write-protect the Status Register. |
| 4 | VSS | power_in | Ground reference for all signals, including the VCC supply voltage. |
| 5 | D | input | Serial Data input used to receive instructions, addresses, and write data; values are latched on the rising edge of Serial Clock (C), MSB first. |
| 6 | C | input | Serial Clock input that synchronizes the SPI interface; data on D is latched on its rising edge and data on Q changes after its falling edge, up to 20 MHz for VCC ≥ 4.5 V. |
| 7 | HOLD | input | Hold input used to pause serial communication without deselecting the device; asserting it low while C is low freezes the interface and puts Q in high impedance. |
| 8 | VCC | power_in | Supply voltage pin, specified from 1.7 V to 5.5 V over the device operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95080-DRMN8TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
m95080-drmn8tp-etched.step/m95080-drmn8tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95080-drmn8tp.step/m95080-drmn8tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (41 pp, sha256
661db3408e0df6c1, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-5(text+vision), consensusclaude-opus-4-8(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).