Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
M95010-WDW6TP
STMicroelectronics · EEPROM · TSSOP-8
M95010-WDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select: driving it high deselects the device and puts Serial Data Output (Q) in high impedance, and after power-up a falling edge on S is required before any instruction. |
| 2 | Q | output | Serial Data Output shifts data out on the falling edge of Serial Clock (C) and is high impedance when the device is deselected or in Hold. |
| 3 | W | input | Write Protect: when held low, writes to the memory are disabled while other operations remain enabled, and it must be driven high or low and must not be left floating. |
| 4 | VSS | power_in | Ground, the reference for the VCC supply voltage. |
| 5 | D | input | Serial Data Input receives instructions, addresses and write data, latched on the rising edge of Serial Clock (C). |
| 6 | C | input | Serial Clock provides the interface timing: input data is latched on its rising edge and output data changes after its falling edge. |
| 7 | HOLD | input | Hold pauses serial communications without deselecting the device, during which Q is high impedance and D and C are don't care; the device must be selected with S low to start Hold. |
| 8 | VCC | power_in | Supply voltage, which must stay within 2.5 V to 5.5 V for the M950x0-W (Table 9) and be decoupled close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95010-WDW6TP - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m95010-wdw6tp-etched.step/m95010-wdw6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95010-wdw6tp.step/m95010-wdw6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (46 pp, sha256
1b7ee07d5879b564, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).