component
M95010-RMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/m95010-rmn6tp
9039874
M95010-RMN6TP
STMicroelectronics · EEPROM · SO-8
M95010-RMN6TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select input; driving S low selects the device (Active Power mode), driving it high deselects the device and puts Serial Data Output (Q) in high impedance (Standby Power mode). |
| 2 | Q | output | Serial Data Output; transfers data serially out of the device, shifted out on the falling edge of Serial Clock (C). |
| 3 | W | input | Write Protect input; when held low, writes to the memory are disabled while other operations remain enabled, and it must not be left floating. |
| 4 | VSS | power_in | Ground; reference for the VCC supply voltage. |
| 5 | D | input | Serial Data Input; transfers instructions, addresses and write data into the device, latched on the rising edge of Serial Clock (C). |
| 6 | C | input | Serial Clock input; provides the timing of the serial interface, latching input data on the rising edge and changing output data after the falling edge. |
| 7 | HOLD | input | Hold input; when driven low while C is already low it pauses serial communication without deselecting the device, forcing Q to high impedance and making D and C don't-care. |
| 8 | VCC | power_in | Supply voltage; for the M950x0-R grade must be a stable voltage in the 1.8 V to 5.5 V range (per Table 10) during instruction execution and write cycles. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95010-RMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
m95010-rmn6tp-etched.step/m95010-rmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95010-rmn6tp.step/m95010-rmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (46 pp, sha256
1b7ee07d5879b564, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M95010-RMN6TP
**STMicroelectronics** · EEPROM · SO-8
M95010-RMN6TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select input; driving S low selects the device (Active Power mode), driving it high deselects the device and puts Serial Data Output (Q) in high impedance (Standby Power mode). |
| 2 | Q | output | Serial Data Output; transfers data serially out of the device, shifted out on the falling edge of Serial Clock (C). |
| 3 | W | input | Write Protect input; when held low, writes to the memory are disabled while other operations remain enabled, and it must not be left floating. |
| 4 | VSS | power_in | Ground; reference for the VCC supply voltage. |
| 5 | D | input | Serial Data Input; transfers instructions, addresses and write data into the device, latched on the rising edge of Serial Clock (C). |
| 6 | C | input | Serial Clock input; provides the timing of the serial interface, latching input data on the rising edge and changing output data after the falling edge. |
| 7 | HOLD | input | Hold input; when driven low while C is already low it pauses serial communication without deselecting the device, forcing Q to high impedance and making D and C don't-care. |
| 8 | VCC | power_in | Supply voltage; for the M950x0-R grade must be a stable voltage in the 1.8 V to 5.5 V range (per Table 10) during instruction execution and write cycles. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `M95010-RMN6TP`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `m95010-rmn6tp-etched.step` / `m95010-rmn6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m95010-rmn6tp.step` / `m95010-rmn6tp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939918160900096) (46 pp, sha256 `1b7ee07d5879b564`, retrieved 2026-09-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m95010-rmn6tp-datasheet.pdf)