component
M93C76-WMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM93C76-WMN6TP
STMicroelectronics · EEPROM · SOIC-8
M93C76-WMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip Select input; an external pull-down resistor (typically 100 kΩ) ensures no device is selected if the bus master leaves S high impedance. |
| 2 | C | input | Serial Clock input (2 MHz or less); needs an external pull-down if the bus master can leave all lines high impedance so tSLCH is met. |
| 3 | D | input | Serial Data input. |
| 4 | Q | output | Serial Data output, high impedance when the device is not selected. |
| 5 | VSS | power_in | Ground. |
| 6 | ORG | input | Organization Select input that configures the memory array as bytes (x8) or words (x16). |
| 7 | DU | unconnected | Don't Use, reserved for ST test sequences; may be left unconnected or connected to VCC or VSS. |
| 8 | VCC | power_in | Supply voltage, 2.5 V to 5.5 V for M93Cx6-W devices. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M93C76-WMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
m93c76-wmn6tp-etched.step/m93c76-wmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m93c76-wmn6tp.step/m93c76-wmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (33 pp, sha256
c02bfe1ec2b65e33, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).