← Commit history

Initial commit: component/m93c66-rmn3tp

Ray ·b5322f92f0 ·
2 files changed +83
README.mdadded+49
@@ -0,0 +1,49 @@+# M93C66-RMN3TP++**STMicroelectronics** · EEPROM · SOIC-8++M93C66-RMN3TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | S | input | Chip Select input. Active High; enables the device and frames each MICROWIRE instruction. Must be pulled to VSS at power-up (recommended external pull-down, typ. 100 kΩ) to prevent inadvertent selection. |+| 2 | C | input | Serial Clock input. Synchronous clock driven by the bus master; latches D on rising edges and shifts Q out. Maximum clock rate 2 MHz. External pull-down recommended so that C is low when S is deselected (meets tSLCH). |+| 3 | D | input | Serial Data input. Carries the start bit, op-code, address, and write data for MICROWIRE instructions; sampled on the rising edge of C while S is High. |+| 4 | Q | tri_state | Serial Data output. Push-pull output that shifts read data out on the rising edge of C; also drives the READY/BUSY status during a programming cycle when S is High. Goes high-impedance when the device is deselected. |+| 5 | VSS | power_in | Ground reference (0 V). Common return for supply and all logic signals. |+| 6 | ORG | input | Organization Select input. Tie to VCC (or leave open - internally pulled up) to configure the array as 256 x 16; tie to VSS to configure as 512 x 8. Must be driven to VCC or VSS (not left mid-rail) in Standby to minimize ICC. |+| 7 | DU | unconnected | Don't Use. Reserved for STMicroelectronics test purposes and must not be used in normal operation. May be left unconnected or tied to VCC or VSS. |+| 8 | VCC | power_in | Positive supply input, 1.8 V to 5.5 V. Decouple to VSS with a 10-100 nF capacitor close to the pin; must remain stable through the internal write cycle (tW). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `M93C66-RMN3TP`+- `M93C66-RMN3TPDW`+- `M93C66-RMN3TPMF`++## CAD (KiCad official)++- Symbol: `M93C66-RMN3TP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/m93c66-rmn3tp.pdf) (None pp, sha256 `ea011e1cc0d30be7`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m93c66-rmn3tp-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "m93c66-rmn3tp",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "m93c66-rmn3tp"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "m93c66-rmn3tp.kicad_sym",+    "m93c66-rmn3tp.kicad_mod",+    "m93c66-rmn3tp.glb",+    "m93c66-rmn3tp.step",+    "m93c66-rmn3tp.lbr",+    "docs/hero.png",+    "docs/m93c66-rmn3tp-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file