component
M93C56-RMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# M93C56-RMN6TP++**STMicroelectronics** · EEPROM · SOIC-8++M93C56-RMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | S | input | Chip Select input; must be driven to VSS during power-up and is brought low between instructions, and a rising edge on S starts each instruction. |+| 2 | C | input | Serial Clock input with a maximum clock rate of 2 MHz; data is sampled on the rising edge and C must be held low when S rises. |+| 3 | D | input | Serial Data input that carries the start bit, op-code, address and data bits, sampled on the rising edge of C. |+| 4 | Q | output | Serial Data output that shifts out read data and gives the READY/BUSY status (Q=0 busy, Q=1 ready) and is high impedance when the device is not selected. |+| 5 | VSS | power_in | Ground reference for the device. |+| 6 | ORG | input | Organization Select: connected to VSS selects x8, and left unconnected or tied to VCC selects x16, and it should be set to VSS or VCC in Standby for minimum current. |+| 7 | DU | unconnected | Don't Use pin reserved for ST test sequences; it may be left unconnected or connected to VCC or VSS. |+| 8 | VCC | power_in | Supply voltage of 1.8 V to 5.5 V for M93C56-R, with a 10 nF to 100 nF decoupling capacitor recommended close to the VCC/VSS pins. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOIC-8 |+| Category | Memory |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `M93C56-RMN6TP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `m93c56-rmn6tp-etched.step` / `m93c56-rmn6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m93c56-rmn6tp.step` / `m93c56-rmn6tp.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588879827826434048) (35 pp, sha256 `7b1f76e6c602697a`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m93c56-rmn6tp-datasheet.pdf)
page.jsonadded+158@@ -0,0 +1,158 @@+{+ "slug": "m93c56-rmn6tp",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "m93c56-rmn6tp",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "m93c56-rmn6tp.kicad_sym",+ "m93c56-rmn6tp.kicad_mod",+ "m93c56-rmn6tp.glb",+ "m93c56-rmn6tp.step",+ "m93c56-rmn6tp.lbr",+ "docs/hero.png",+ "docs/m93c56-rmn6tp-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "M93C56-RMN6TP",+ "manufacturer": "STMicroelectronics",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Memory",+ "subcategory": "EEPROM",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588879827826434048",+ "parts": {+ "symbol": "m93c56-rmn6tp.kicad_sym",+ "footprint": "m93c56-rmn6tp.kicad_mod",+ "model_3d": "m93c56-rmn6tp-etched.glb",+ "model_3d_plain": "m93c56-rmn6tp.glb",+ "model_3d_step": "m93c56-rmn6tp-etched.step",+ "model_3d_step_plain": "m93c56-rmn6tp.step",+ "lbr": "m93c56-rmn6tp.lbr"+ },+ "distributor_links": {+ "lcsc": "C140879",+ "digikey": "497-8656-2-ND",+ "mouser": "511-M93C56-RMN6TP"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T07:32:41Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-8656-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-M93C56-RMN6TP",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "S",+ "type": "input",+ "description": "Chip Select input; must be driven to VSS during power-up and is brought low between instructions, and a rising edge on S starts each instruction."+ },+ {+ "number": "2",+ "name": "C",+ "type": "input",+ "description": "Serial Clock input with a maximum clock rate of 2 MHz; data is sampled on the rising edge and C must be held low when S rises."+ },+ {+ "number": "3",+ "name": "D",+ "type": "input",+ "description": "Serial Data input that carries the start bit, op-code, address and data bits, sampled on the rising edge of C."+ },+ {+ "number": "4",+ "name": "Q",+ "type": "output",+ "description": "Serial Data output that shifts out read data and gives the READY/BUSY status (Q=0 busy, Q=1 ready) and is high impedance when the device is not selected."+ },+ {+ "number": "5",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "6",+ "name": "ORG",+ "type": "input",+ "description": "Organization Select: connected to VSS selects x8, and left unconnected or tied to VCC selects x16, and it should be set to VSS or VCC in Standby for minimum current."+ },+ {+ "number": "7",+ "name": "DU",+ "type": "unconnected",+ "description": "Don't Use pin reserved for ST test sequences; it may be left unconnected or connected to VCC or VSS."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage of 1.8 V to 5.5 V for M93C56-R, with a 10 nF to 100 nF decoupling capacitor recommended close to the VCC/VSS pins."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Figure 2 on page 7 (8-pin package connections top view) could not be fully resolved from text encodi"+ ],+ "pages_sent": 35,+ "cost_usd": 0.322,+ "at": "2026-10-01T07:32:25"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588879827826434048",+ "pages": 35,+ "sha256": "7b1f76e6c602697a",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}