component
M7H
Public Made by Adomby adom
DIYI Elec Tech Diodes - General Purpose, SMA. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownM7H
DIYI Elec Tech · Diodes - General Purpose · SMA
M7H from DIYI Elec Tech, in a SMA. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode: the banded/marked end per the datasheet; pad 1 of the KiCad diode footprint. |
| 2 | A | passive | Anode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DIYI Elec Tech |
| Package | SMA |
| Category | Diodes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Recurrent Peak Reverse Voltage (M7 column) | V | 1000 | V | 1 | |||
| Maximum RMS Voltage (M7 column) | VRMS | 700 | V | 1 | |||
| Maximum DC Blocking Voltage (M7 column) | VDC | 1000 | V | 1 | |||
| Average Rectified Output Current | IF(AV) | 1 | A | 1 | |||
| Rating for fusing | I2t | 3.74 | A²s | t<8.3ms | 1 | ||
| Non-Repetitive Peak Forward Surge Current | IFSM | 30 | A | 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) | 1 | ||
| Non-Repetitive Peak Forward Surge Current | IFSM | 24 | A | 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) | 1 | ||
| Non-Repetitive Peak Forward Surge Current | IFSM | 60 | A | 1.0ms single half sine-wave superimposed on rated load (JEDEC Method) | 1 | ||
| Non-Repetitive Peak Forward Surge Current | IFSM | 48 | A | 1.0ms single half sine-wave superimposed on rated load (JEDEC Method) | 1 | ||
| Surge current, 10000 times | IFSM | 22.5 | A | 10000 times, time width 1ms, time interval 3s | 1 | ||
| Operating and Storage Temperature Range | TJ, TSTG | -55 | 150 | ℃ | 1 | ||
| Typical reverse recovery time | trr | 1.5 | μs | IF=0.5A, IR=1.0A, IRR=0.25A | 1 | ||
| Typical Thermal Resistance, junction to lead | RθJL | 23 | ℃/W | Device mounted on FR-4 substrate, 1"*1", 2oz, single-sided PC board, 0.1"*0.15" copper pad | 1 |
CAD (KiCad official)
- Symbol:
M7H - Footprint:
Diode_SMD:D_SMA - 3D model: SMA (KiCad packages3D, STEP)
- 3D model files:
m7h-etched.step/m7h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m7h.step/m7h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: DIYI Elec Tech datasheet (3 pp, sha256
e435f3e7d521db2d, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarycathode-band convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).