component
M7GAT
Public Made by Adomby adom
Agertech Diodes - General Purpose, SMA(DO-214AC). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
M7GAT
Agertech · Diodes - General Purpose · SMA(DO-214AC)
M7GAT from Agertech, in a SMA(DO-214AC). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode terminal of the rectifier diode (pin 1 per pinning table); M7GAT is rated for 1000V VRRM and 1.0A average forward current. |
| 2 | Anode | passive | Anode terminal of the rectifier diode (pin 2 per pinning table); forward voltage max 1.1 V at 1.0 A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Agertech |
| Package | SMA(DO-214AC) |
| Category | Diodes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage | VRRM | 1000 | V | Ratings at 25℃ ambient | 1 | ||
| Maximum RMS Voltage | VRMS | 700 | V | Ratings at 25℃ ambient | 1 | ||
| Maximum DC Blocking Voltage | VDC | 1000 | V | Ratings at 25℃ ambient | 1 | ||
| Maximum Average Forward Rectified Current | IF(AV) | 1 | A | Single phase half-wave 60 Hz, resistive or inductive load | 1 | ||
| Peak Forward Surge Current | IFSM | 30 | A | 8.3 ms single half sine wave superimposed on rated load (JEDEC Method) | 1 | ||
| Maximum Forward Voltage | VF | 1.1 | V | at 1.0 A | 1 | ||
| Maximum DC Reverse Current | IR | 5 | μA | at Rated DC Blocking Voltage, TA=25℃ | 1 | ||
| Maximum DC Reverse Current | IR | 50 | μA | at Rated DC Blocking Voltage, TA=125℃ | 1 | ||
| Operating and Storage Temperature Range | TJ,TSTG | -55 | 150 | ℃ | 1 | ||
| Typical Junction Capacitance | CJ | 15 | pF | Measured at 1MHz and applied reverse voltage of 4 V D.C. | 1 | ||
| Typical Thermal Resistance | RθJA | 75 | ℃/W | P.C.B. mounted with 1.0 X 1.0" (2.54 X 2.54 cm) copper pad areas | 1 |
CAD (KiCad official)
- Symbol:
M7GAT - Footprint:
Diode_SMD:D_SMA - 3D model: SMA(DO-214AC) (KiCad packages3D, STEP)
- 3D model files:
m7gat-etched.step/m7gat-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m7gat.step/m7gat.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Agertech datasheet (4 pp, sha256
62ebba919f833a13, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M7GAT
**Agertech** · Diodes - General Purpose · SMA(DO-214AC)
M7GAT from Agertech, in a SMA(DO-214AC). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode terminal of the rectifier diode (pin 1 per pinning table); M7GAT is rated for 1000V VRRM and 1.0A average forward current. |
| 2 | Anode | passive | Anode terminal of the rectifier diode (pin 2 per pinning table); forward voltage max 1.1 V at 1.0 A. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Agertech |
| Package | SMA(DO-214AC) |
| Category | Diodes |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage | VRRM | | | 1000 | V | Ratings at 25℃ ambient | 1 |
| Maximum RMS Voltage | VRMS | | | 700 | V | Ratings at 25℃ ambient | 1 |
| Maximum DC Blocking Voltage | VDC | | | 1000 | V | Ratings at 25℃ ambient | 1 |
| Maximum Average Forward Rectified Current | IF(AV) | | | 1 | A | Single phase half-wave 60 Hz, resistive or inductive load | 1 |
| Peak Forward Surge Current | IFSM | | | 30 | A | 8.3 ms single half sine wave superimposed on rated load (JEDEC Method) | 1 |
| Maximum Forward Voltage | VF | | | 1.1 | V | at 1.0 A | 1 |
| Maximum DC Reverse Current | IR | | | 5 | μA | at Rated DC Blocking Voltage, TA=25℃ | 1 |
| Maximum DC Reverse Current | IR | | | 50 | μA | at Rated DC Blocking Voltage, TA=125℃ | 1 |
| Operating and Storage Temperature Range | TJ,TSTG | -55 | | 150 | ℃ | | 1 |
| Typical Junction Capacitance | CJ | | 15 | | pF | Measured at 1MHz and applied reverse voltage of 4 V D.C. | 1 |
| Typical Thermal Resistance | RθJA | | 75 | | ℃/W | P.C.B. mounted with 1.0 X 1.0" (2.54 X 2.54 cm) copper pad areas | 1 |
## CAD (KiCad official)
- Symbol: `M7GAT`
- Footprint: `Diode_SMD:D_SMA`
- 3D model: SMA(DO-214AC) (KiCad packages3D, STEP)
- 3D model files: `m7gat-etched.step` / `m7gat-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m7gat.step` / `m7gat.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Agertech datasheet](docs/m7gat-datasheet.pdf) (4 pp, sha256 `62ebba919f833a13`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m7gat-datasheet.pdf)