main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs m74hc259yrm13tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers m74hc259yrm13tr: viewers · Ray
m74hc259yrm13tr-etched.fit.json m74hc259yrm13tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
m74hc259yrm13tr-etched.glb m74hc259yrm13tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
m74hc259yrm13tr-etched.step m74hc259yrm13tr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
m74hc259yrm13tr.glb Publish 0.1.0 · Ray
m74hc259yrm13tr.kicad_mod Publish 0.1.0 · Ray
m74hc259yrm13tr.kicad_sym Publish 0.1.0 · Ray
m74hc259yrm13tr.lbr Publish 0.1.0 · Ray
m74hc259yrm13tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json m74hc259yrm13tr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md m74hc259yrm13tr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

M74HC259YRM13TR

STMicroelectronics · Latches · SO-16

M74HC259YRM13TR from STMicroelectronics, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A input Address input A (LSB of latch-select address). Combined with B and C, selects which of the 8 latches (Q0-Q7) is addressed. CMOS input, VIH >= 0.7VCC, VIL <= 0.3VCC (approx.).
2 B input Address input B (middle bit of latch-select address). Combined with A and C, selects which of the 8 latches (Q0-Q7) is addressed.
3 C input Address input C (MSB of latch-select address). Combined with A and B, selects which of the 8 latches (Q0-Q7) is addressed.
4 Q0 output Latch output 0. Addressed when C=L, B=L, A=L. Push-pull CMOS output,
5 Q1 output Latch output 1. Addressed when C=L, B=L, A=H. Push-pull CMOS output,
6 Q2 output Latch output 2. Addressed when C=L, B=H, A=L. Push-pull CMOS output,
7 Q3 output Latch output 3. Addressed when C=L, B=H, A=H. Push-pull CMOS output,
8 GND power_in Ground (0 V) reference for the device.
9 Q4 output Latch output 4. Addressed when C=H, B=L, A=L. Push-pull CMOS output,
10 Q5 output Latch output 5. Addressed when C=H, B=L, A=H. Push-pull CMOS output,
11 Q6 output Latch output 6. Addressed when C=H, B=H, A=L. Push-pull CMOS output,
12 Q7 output Latch output 7. Addressed when C=H, B=H, A=H. Push-pull CMOS output,
13 D input Serial data input. The logic level on D is transferred to the addressed latch (Q0-Q7) while ENABLE is low, and stored on the positive-going edge of ENABLE.
14 ~{ENABLE} input Latch enable input, active low. When low, data on D flows through to the addressed latch (transparent mode); when high, all latches hold their previous state. Data is latched on the positive-going edge.
15 ~{CLEAR} input Conditional asynchronous reset input, active low. With ENABLE high, taking CLEAR low clears all 8 latches to low. With ENABLE low, all unaddressed latches are cleared while the addressed latch follows D (3-to-8 line decoder mode).
16 VCC power_in Positive supply voltage. Recommended operating range 2.0 V to 6.0 V; absolute maximum 7 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-16
Category Logic
Pins 16

Ordering variants

  • M74HC259YRM13TR
  • M74HC259YRM13TRM74HC259RM13TR
  • M74HC259YRM13TRM74HC259TTR
  • M74HC259YRM13TRM74HC259YTTR

CAD (KiCad official)

  • Symbol: M74HC259YRM13TR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SO-16 (KiCad packages3D, STEP)
  • 3D model files: m74hc259yrm13tr-etched.step / m74hc259yrm13tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m74hc259yrm13tr.step / m74hc259yrm13tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (None pp, sha256 972d1b43864d2b68, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF