← Commit history
README.mdadded+58@@ -0,0 +1,58 @@+# M74HC259YRM13TR++**STMicroelectronics** · Latches · SO-16++M74HC259YRM13TR from STMicroelectronics, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A | input | Address input A (LSB of latch-select address). Combined with B and C, selects which of the 8 latches (Q0-Q7) is addressed. CMOS input, VIH >= 0.7*VCC, VIL <= 0.3*VCC (approx.). |+| 2 | B | input | Address input B (middle bit of latch-select address). Combined with A and C, selects which of the 8 latches (Q0-Q7) is addressed. |+| 3 | C | input | Address input C (MSB of latch-select address). Combined with A and B, selects which of the 8 latches (Q0-Q7) is addressed. |+| 4 | Q0 | output | Latch output 0. Addressed when C=L, B=L, A=L. Push-pull CMOS output, |IOH| = IOL = 4 mA (min) at VCC = 4.5 V. |+| 5 | Q1 | output | Latch output 1. Addressed when C=L, B=L, A=H. Push-pull CMOS output, |IOH| = IOL = 4 mA (min) at VCC = 4.5 V. |+| 6 | Q2 | output | Latch output 2. Addressed when C=L, B=H, A=L. Push-pull CMOS output, |IOH| = IOL = 4 mA (min) at VCC = 4.5 V. |+| 7 | Q3 | output | Latch output 3. Addressed when C=L, B=H, A=H. Push-pull CMOS output, |IOH| = IOL = 4 mA (min) at VCC = 4.5 V. |+| 8 | GND | power_in | Ground (0 V) reference for the device. |+| 9 | Q4 | output | Latch output 4. Addressed when C=H, B=L, A=L. Push-pull CMOS output, |IOH| = IOL = 4 mA (min) at VCC = 4.5 V. |+| 10 | Q5 | output | Latch output 5. Addressed when C=H, B=L, A=H. Push-pull CMOS output, |IOH| = IOL = 4 mA (min) at VCC = 4.5 V. |+| 11 | Q6 | output | Latch output 6. Addressed when C=H, B=H, A=L. Push-pull CMOS output, |IOH| = IOL = 4 mA (min) at VCC = 4.5 V. |+| 12 | Q7 | output | Latch output 7. Addressed when C=H, B=H, A=H. Push-pull CMOS output, |IOH| = IOL = 4 mA (min) at VCC = 4.5 V. |+| 13 | D | input | Serial data input. The logic level on D is transferred to the addressed latch (Q0-Q7) while ENABLE is low, and stored on the positive-going edge of ENABLE. |+| 14 | ~{ENABLE} | input | Latch enable input, active low. When low, data on D flows through to the addressed latch (transparent mode); when high, all latches hold their previous state. Data is latched on the positive-going edge. |+| 15 | ~{CLEAR} | input | Conditional asynchronous reset input, active low. With ENABLE high, taking CLEAR low clears all 8 latches to low. With ENABLE low, all unaddressed latches are cleared while the addressed latch follows D (3-to-8 line decoder mode). |+| 16 | VCC | power_in | Positive supply voltage. Recommended operating range 2.0 V to 6.0 V; absolute maximum 7 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SO-16 |+| Category | Logic |+| Pins | 16 |++## Ordering variants++- `M74HC259YRM13TR`+- `M74HC259YRM13TRM74HC259RM13TR`+- `M74HC259YRM13TRM74HC259TTR`+- `M74HC259YRM13TRM74HC259YTTR`++## CAD (KiCad official)++- Symbol: `M74HC259YRM13TR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SO-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/m74hc259yrm13tr.pdf) (None pp, sha256 `972d1b43864d2b68`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m74hc259yrm13tr-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "m74hc259yrm13tr",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Latches, SO-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "m74hc259yrm13tr"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "m74hc259yrm13tr.kicad_sym",+ "m74hc259yrm13tr.kicad_mod",+ "m74hc259yrm13tr.glb",+ "m74hc259yrm13tr.step",+ "m74hc259yrm13tr.lbr",+ "docs/hero.png",+ "docs/m74hc259yrm13tr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}