Generated by kicad-footprint-generator · KiCad file format 20260206
M65831FSA24.TB
Wuxi I-core Elec · Audio Interface ICs · SOP-24
M65831FSA24.TB from Wuxi I-core Elec, in a SOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Digital supply pin; the datasheet gives a recommended supply of 4.5 V to 5.5 V (typical 5 V) and requires VCC-VDD within -0.3 V to 0.3 V. |
| 2 | XIN | input | Crystal oscillator input, used together with XOUT and an external 2 MHz crystal. |
| 3 | XOUT | output | Crystal oscillator output; connect an external 2 MHz crystal. |
| 4 | D1/REQ | input | Delay setting bit D1 in easy mode; request signal input in µ-COM mode. |
| 5 | D2/SCK | input | Delay setting bit D2 in easy mode; conversion clock input in µ-COM mode, where DATA is latched on the falling edge of SCK. |
| 6 | D3/DATA | input | Delay setting bit D3 in easy mode; serial data input in µ-COM mode. |
| 7 | D4/IDSW | input | Delay setting bit D4 in easy mode; ID switch control code input in µ-COM mode. |
| 8 | TEST | input | Test pin; L selects normal operating mode. |
| 9 | EASY/uCOM | input | Mode select: H selects easy (parallel data) mode, L selects µ-COM (serial data) mode. |
| 10 | SLEEP | input | Sleep control: H stops the clock and RAM (sleep mode), L selects normal operation. |
| 11 | DGND | power_in | Digital ground, connected to the analog ground. |
| 12 | AGND | power_in | Analog ground. |
| 13 | LPF2 OUT | output | Low-pass filter 2 output; an external RC network forms the low-pass filter. |
| 14 | LPF2 IN | input | Low-pass filter 2 input. |
| 15 | OP2 OUT | output | Amplifier 2 output; an external RC network forms an integrator. |
| 16 | OP2 IN | input | Amplifier 2 input. |
| 17 | CC2 | passive | Current control 2; the datasheet gives no function beyond the pin name. |
| 18 | CC1 | passive | Current control 1; the datasheet gives no function beyond the pin name. |
| 19 | REF | passive | Reference level equal to 1/2 of the analog supply. |
| 20 | OP1 IN | input | Amplifier 1 input; an external RC network forms an integrator. |
| 21 | OP1 OUT | output | Amplifier 1 output. |
| 22 | LPF1 OUT | output | Low-pass filter 1 output; an external RC network forms the low-pass filter. |
| 23 | LPF1 IN | input | Low-pass filter 1 input. |
| 24 | VCC | power_in | Analog supply; recommended 4.5 V to 5.5 V (typical 5 V), absolute maximum 6.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wuxi I-core Elec |
| Package | SOP-24 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 24 |
CAD (KiCad official)
- Symbol:
M65831FSA24.TB - Footprint:
Package_SO:SOP-24_7.5x15.4mm_P1.27mm - 3D model: SOP-24 (KiCad packages3D, STEP)
- 3D model files:
m65831fsa24-tb-etched.step/m65831fsa24-tb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m65831fsa24-tb.step/m65831fsa24-tb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wuxi I-core Elec datasheet (14 pp, sha256
c5a0406f5fc58e5b, retrieved 2026-11-02, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).