main
Ray
Publish 0.1.0
42edbb7
M601B
Mysentech · Temperature Sensors · DFN-8(2x2)
M601B from Mysentech, in a DFN-8(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply pin; the datasheet gives a supply range of 1.8V to 5.5V (3.3V typical). |
| 2 | ALERT | output | Temperature alarm indicator output that changes level when a programmed high or low threshold is reached, with IOH of 1 mA typical at VDD=5V. |
| 3 | DQ | bidirectional | Single-wire data interface; requires an external pull-up of 1 kΩ to 10 kΩ (4.7 kΩ typical), with VOL at most 0.4V at IOL of 3 mA. |
| 4 | NC | unconnected | No internal connection; leave floating or connect to ground. |
| 5 | GND | power_in | Ground reference pin. |
| 6 | NC | unconnected | No internal connection; leave floating or connect to ground. |
| 7 | NC | unconnected | No internal connection; leave floating or connect to ground. |
| 8 | NC | unconnected | No internal connection; leave floating or connect to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Mysentech |
| Package | DFN-8(2x2) |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 温度误差 (0℃ to +50℃) | tERR | -0.5 | 0.5 | ℃ | 0℃ to +50℃ | 6 | |
| 温度误差 (-55°C to +125°C) | tERR | -1.5 | 1.5 | ℃ | -55°C to +125°C | 6 | |
| 温度误差 (-70°C to +150°C) | tERR | -2 | 2 | ℃ | -70°C to +150°C | 6 | |
| 长期漂移 | 0.03 | °C/年 | 6 | ||||
| 测温范围 | -70 | 150 | ℃ | 6 | |||
| 供电电压 (absolute maximum) | VDD | -0.3 | 6 | V | 7 | ||
| 引脚上的最大电压 | -0.3 | 6 | V | 7 | |||
| 引脚上的输入电流 | -100 | 100 | mA | 7 | |||
| 运行温度范围 | -70 | 150 | ℃ | 7 | |||
| 存储温度范围 | -70 | 150 | ℃ | 7 | |||
| ESD HBM (人体放电模式) | -8 | 8 | kV | 7 | |||
| 供电电压 | VDD | 1.8 | 3.3 | 5.5 | V | 7 | |
| 供电电流 空闲状态(单次测量模式) | IDD | 0.1 | 1 | uA | 空闲状态(单次测量模式) | 7 | |
| 输出低电平电压 | VOL | 0.4 | V | IOL = -3 mA | 7 | ||
| 输入漏电流 | IIN | -0.1 | 0.1 | uA | 7 | ||
| 上拉电阻 | Rup | 1 | 4.7 | 10 | kΩ | 7 | |
| 非易失存储写周期 | tWR | 40 | ms | 8 | |||
| EEPROM 写次数 | NEEWR | 50000 | 次 | -55°C 到+55°C | 8 | ||
| 写 0 低电平时间 | tLOW0 | 60 | 60 | 120 | µs | 见备注 | 22 |
| 写 1 低电平时间 | tLOW1 | 1 | 5 | 15 | µs | 见备注 | 22 |
| 存在检测高电平时间 | tPDHIGH | 15 | 30 | 60 | µs | 见备注 | 22 |
| 存在检测低电平时间 | tPDLOW | 60 | 115 | 240 | µs | 见备注 | 22 |
CAD (KiCad official)
- Symbol:
M601B - Footprint:
Package_DFN_QFN:DFN-8_2x2mm_P0.5mm - 3D model: DFN-8(2x2) (KiCad packages3D, STEP)
- 3D model files:
m601b-etched.step/m601b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m601b.step/m601b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Mysentech datasheet (28 pp, sha256
aeda39d8ec9e0fa0, retrieved 2026-11-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M601B
**Mysentech** · Temperature Sensors · DFN-8(2x2)
M601B from Mysentech, in a DFN-8(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply pin; the datasheet gives a supply range of 1.8V to 5.5V (3.3V typical). |
| 2 | ALERT | output | Temperature alarm indicator output that changes level when a programmed high or low threshold is reached, with IOH of 1 mA typical at VDD=5V. |
| 3 | DQ | bidirectional | Single-wire data interface; requires an external pull-up of 1 kΩ to 10 kΩ (4.7 kΩ typical), with VOL at most 0.4V at IOL of 3 mA. |
| 4 | NC | unconnected | No internal connection; leave floating or connect to ground. |
| 5 | GND | power_in | Ground reference pin. |
| 6 | NC | unconnected | No internal connection; leave floating or connect to ground. |
| 7 | NC | unconnected | No internal connection; leave floating or connect to ground. |
| 8 | NC | unconnected | No internal connection; leave floating or connect to ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Mysentech |
| Package | DFN-8(2x2) |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 温度误差 (0℃ to +50℃) | tERR | -0.5 | | 0.5 | ℃ | 0℃ to +50℃ | 6 |
| 温度误差 (-55°C to +125°C) | tERR | -1.5 | | 1.5 | ℃ | -55°C to +125°C | 6 |
| 温度误差 (-70°C to +150°C) | tERR | -2 | | 2 | ℃ | -70°C to +150°C | 6 |
| 长期漂移 | | | | 0.03 | °C/年 | | 6 |
| 测温范围 | | -70 | | 150 | ℃ | | 6 |
| 供电电压 (absolute maximum) | VDD | -0.3 | | 6 | V | | 7 |
| 引脚上的最大电压 | | -0.3 | | 6 | V | | 7 |
| 引脚上的输入电流 | | -100 | | 100 | mA | | 7 |
| 运行温度范围 | | -70 | | 150 | ℃ | | 7 |
| 存储温度范围 | | -70 | | 150 | ℃ | | 7 |
| ESD HBM (人体放电模式) | | -8 | | 8 | kV | | 7 |
| 供电电压 | VDD | 1.8 | 3.3 | 5.5 | V | | 7 |
| 供电电流 空闲状态(单次测量模式) | IDD | | 0.1 | 1 | uA | 空闲状态(单次测量模式) | 7 |
| 输出低电平电压 | VOL | | | 0.4 | V | IOL = -3 mA | 7 |
| 输入漏电流 | IIN | -0.1 | | 0.1 | uA | | 7 |
| 上拉电阻 | Rup | 1 | 4.7 | 10 | kΩ | | 7 |
| 非易失存储写周期 | tWR | | | 40 | ms | | 8 |
| EEPROM 写次数 | NEEWR | 50000 | | | 次 | -55°C 到+55°C | 8 |
| 写 0 低电平时间 | tLOW0 | 60 | 60 | 120 | µs | 见备注 | 22 |
| 写 1 低电平时间 | tLOW1 | 1 | 5 | 15 | µs | 见备注 | 22 |
| 存在检测高电平时间 | tPDHIGH | 15 | 30 | 60 | µs | 见备注 | 22 |
| 存在检测低电平时间 | tPDLOW | 60 | 115 | 240 | µs | 见备注 | 22 |
## CAD (KiCad official)
- Symbol: `M601B`
- Footprint: `Package_DFN_QFN:DFN-8_2x2mm_P0.5mm`
- 3D model: DFN-8(2x2) (KiCad packages3D, STEP)
- 3D model files: `m601b-etched.step` / `m601b-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m601b.step` / `m601b.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Mysentech datasheet](docs/m601b-datasheet.pdf) (28 pp, sha256 `aeda39d8ec9e0fa0`, retrieved 2026-11-10, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m601b-datasheet.pdf)