main
Ray
m54133ag-s16-r: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
976b174
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249
{
"schema_version": 1,
"type": "component",
"slug": "m54133ag-s16-r",
"title": "M54133AG-S16-R",
"brief": "UTC Unisonic Tech Supervisor and Reset ICs, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"pmic",
"m54133ag-s16-r"
],
"component": {
"mpn": "M54133AG-S16-R",
"manufacturer": "UTC Unisonic Tech",
"package": "SOP-16",
"pin_count": 16,
"category": "PMIC",
"subcategory": "Supervisor and Reset ICs",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/55d7bde825ba4e929cd2892b921974ca.pdf",
"parts": {
"symbol": "m54133ag-s16-r.kicad_sym",
"footprint": "m54133ag-s16-r.kicad_mod",
"model_3d": "m54133ag-s16-r-etched.glb",
"model_3d_plain": "m54133ag-s16-r.glb",
"model_3d_step": "m54133ag-s16-r-etched.step",
"model_3d_step_plain": "m54133ag-s16-r.step",
"lbr": "m54133ag-s16-r.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device."
},
{
"number": "2",
"name": "IREF",
"type": "passive",
"description": "Pin for connecting an external resistor (approx. 180 kΩ typical) that sets the constant current for internal circuits. Voltage at this pin is approximately 1.3 V."
},
{
"number": "3",
"name": "VCC",
"type": "power_out",
"description": "Output of the internal constant-voltage regulator (~5.2 V at IOH=-1 mA). Requires an external decoupling capacitor to GND."
},
{
"number": "4",
"name": "OFFC",
"type": "passive",
"description": "Reset-time capacitor pin. Connect a capacitor (e.g. 0.33 μF for TW3≈75 ms) that determines the restore time after a leakage event ends or after the SCR is triggered. Threshold ~2.4 V."
},
{
"number": "5",
"name": "TRC1",
"type": "passive",
"description": "Capacitor pin for the 3-ms integrator that integrates the signal output from the leak-signal input-level discriminator. Threshold ~2.4 V; typical C=0.01 μF for TW1≈3 ms."
},
{
"number": "6",
"name": "TRC2",
"type": "passive",
"description": "Capacitor pin for the 1-ms noise-elimination integrator. Threshold ~2.4 V; typical C=0.0047 μF for TW2≈1.5 ms."
},
{
"number": "7",
"name": "DLYC",
"type": "passive",
"description": "Delay-timer capacitor pin. Connect a capacitor (e.g. 1.0 μF for TW4≈300 ms) to set the delay time when using the delay function. Threshold ~2.4 V."
},
{
"number": "8",
"name": "SCRT",
"type": "output",
"description": "SCR gate driver output. Sources high output current (IOH ~-50 μA typ. at TA=+20 °C, VO=8 V) to trigger the external SCR that fires the trip coil; low output voltage VOL≈0.1 V at IOL=200 μA."
},
{
"number": "9",
"name": "VREF",
"type": "output",
"description": "Reference-voltage output providing the input reference level for leakage detection. Nominal 2.4 V at IOH=-200 μA; VREF-to-GND clamp voltage 4.7 V at 5 mA."
},
{
"number": "10",
"name": "ILKI",
"type": "input",
"description": "Leakage-detection signal input (the other side of the differential leakage detector, referenced to VREF). DC input voltage of leakage detection ±14.0 mVdc w.r.t. VREF; total AC input VT=11.5 mVrms typ. at 60 Hz; input bias current ~220 nA."
},
{
"number": "11",
"name": "OPAO",
"type": "output",
"description": "Output of the internal operational amplifier used as an active low-pass filter. IOH=2.8 mA, IOL=0.8 mA; max output swing 3.5 Vpp; voltage gain 40 dB at 1 kHz; -3 dB BW=6 kHz."
},
{
"number": "12",
"name": "C2",
"type": "passive",
"description": "Compensation capacitor pin for the op-amp; connect a capacitor between pins 11 (OPAO) and 12 to prevent abnormal oscillations."
},
{
"number": "13",
"name": "OPI-",
"type": "input",
"description": "Inverting (negative) input of the internal operational amplifier. Differential input clamp ±0.8 V; differential input current limit ±5 mA; input bias current ~125 nA."
},
{
"number": "14",
"name": "C1",
"type": "passive",
"description": "Noise-filter capacitor pin for the op-amp inputs; connect capacitors between pin 14 and pin 13 (OPI-) and between pin 14 and pin 15 (OPI+) to prevent noise-induced malfunction."
},
{
"number": "15",
"name": "OPI+",
"type": "input",
"description": "Non-inverting (positive) input of the internal operational amplifier. Differential input clamp ±0.8 V vs. OPI-; input bias current ~125 nA."
},
{
"number": "16",
"name": "VS",
"type": "power_in",
"description": "Main power supply input. Recommended operating range 7-12 V; absolute maximum 15 V. Standby supply current IS0=610 μA typ. at RIREF=180 kΩ."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/55d7bde825ba4e929cd2892b921974ca.pdf",
"pages": 7,
"sha256": "3837fabbf92a63da",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "m54133ag-s16-r.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "m54133ag-s16-r-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
9.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "ebf6e93911f450ad12fc37c88788e83d2e8dd96d8b4dbb2a189bfa24ae2d226d",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "UTC Unisonic Tech",
"Package": "SOP-16",
"Category": "PMIC",
"Pins": "16"
}
},
"variants": [
{
"mpn": "M54133AG-S16-R",
"kind": "packaging"
},
{
"mpn": "M54133AL-S16N-R",
"kind": "unknown"
},
{
"mpn": "M54133AG-S16N-R",
"kind": "unknown"
}
],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"m54133ag-s16-r"
],
"discovery_pitch": "M54133AG-S16-R (UTC Unisonic Tech) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"m54133ag-s16-r.kicad_sym",
"m54133ag-s16-r.kicad_mod",
"m54133ag-s16-r.glb",
"m54133ag-s16-r.step",
"m54133ag-s16-r.lbr",
"docs/hero.png",
"docs/m54133ag-s16-r-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"updated_at": "2026-09-28T18:22:40.763Z"
}