3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownM4A5-32
Lattice · Programmable Logic Device (CPLDs/FPGAs) · TQFP-44(10x10)
M4A5-32 from Lattice, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I/O5 | bidirectional | Input/output pin I/O5. |
| 2 | I/O6 | bidirectional | Input/output pin I/O6. |
| 3 | I/O7 | bidirectional | Input/output pin I/O7. |
| 4 | TDI | input | Test Data In for JTAG boundary scan and in-system programming. |
| 5 | CLK0/I0 | input | Clock 0 or dedicated input. |
| 6 | GND | power_in | Ground. |
| 7 | TCK | input | Test Clock for JTAG. |
| 8 | I/O8 | bidirectional | Input/output pin I/O8. |
| 9 | I/O9 | bidirectional | Input/output pin I/O9. |
| 10 | I/O10 | bidirectional | Input/output pin I/O10. |
| 11 | I/O11 | bidirectional | Input/output pin I/O11. |
| 12 | I/O12 | bidirectional | Input/output pin I/O12. |
| 13 | I/O13 | bidirectional | Input/output pin I/O13. |
| 14 | I/O14 | bidirectional | Input/output pin I/O14. |
| 15 | I/O15 | bidirectional | Input/output pin I/O15. |
| 16 | VCC | power_in | Supply voltage (5 V for M4A5). |
| 17 | GND | power_in | Ground. |
| 18 | I/O16 | bidirectional | Input/output pin I/O16. |
| 19 | I/O17 | bidirectional | Input/output pin I/O17. |
| 20 | I/O18 | bidirectional | Input/output pin I/O18. |
| 21 | I/O19 | bidirectional | Input/output pin I/O19. |
| 22 | I/O20 | bidirectional | Input/output pin I/O20. |
| 23 | I/O21 | bidirectional | Input/output pin I/O21. |
| 24 | I/O22 | bidirectional | Input/output pin I/O22. |
| 25 | I/O23 | bidirectional | Input/output pin I/O23. |
| 26 | TMS | input | Test Mode Select for JTAG. |
| 27 | CLK1/I1 | input | Clock 1 or dedicated input. |
| 28 | GND | power_in | Ground. |
| 29 | TDO | output | Test Data Out for JTAG. |
| 30 | I/O24 | bidirectional | Input/output pin I/O24. |
| 31 | I/O25 | bidirectional | Input/output pin I/O25. |
| 32 | I/O26 | bidirectional | Input/output pin I/O26. |
| 33 | I/O27 | bidirectional | Input/output pin I/O27. |
| 34 | I/O28 | bidirectional | Input/output pin I/O28. |
| 35 | I/O29 | bidirectional | Input/output pin I/O29. |
| 36 | I/O30 | bidirectional | Input/output pin I/O30. |
| 37 | I/O31 | bidirectional | Input/output pin I/O31. |
| 38 | VCC | power_in | Supply voltage (5 V for M4A5). |
| 39 | GND | power_in | Ground. |
| 40 | I/O0 | bidirectional | Input/output pin I/O0. |
| 41 | I/O1 | bidirectional | Input/output pin I/O1. |
| 42 | I/O2 | bidirectional | Input/output pin I/O2. |
| 43 | I/O3 | bidirectional | Input/output pin I/O3. |
| 44 | I/O4 | bidirectional | Input/output pin I/O4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lattice |
| Package | TQFP-44(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output HIGH Voltage | VOH | 2.4 | V | IOH = -3.2 mA, VCC = Min, VIN = VIH or VIL | 36 | ||
| Output HIGH Voltage | VOH | 3.3 | 3.6 | V | IOH = -100 µA, VCC = Max, VIN = VIH or VIL | 36 | |
| Output LOW Voltage | VOL | 0.5 | V | IOL = 24 mA, VCC = Min, VIN = VIH or VIL (Note 1) | 36 | ||
| Input HIGH Voltage | VIH | 2 | V | Guaranteed Input Logical HIGH Voltage for all Inputs (Note 2) | 36 | ||
| Input LOW Voltage | VIL | 0.8 | V | Guaranteed Input Logical LOW Voltage for all Inputs (Note 2) | 36 | ||
| Input HIGH Leakage Current | IIH | 10 | μA | VIN = 5.25 V, VCC = Max (Note 3) | 36 | ||
| Input LOW Leakage Current | IIL | -10 | μA | VIN = 0 V, VCC = Max (Note 3) | 36 | ||
| Off-State Output Leakage Current HIGH | IOZH | 10 | μA | VOUT = 5.25 V, VCC = Max, VIN = VIH or VIL (Note 3) | 36 | ||
| Off-State Output Leakage Current LOW | IOZL | -10 | μA | VOUT = 0 V, VCC = Max, VIN = VIH or VIL (Note 3) | 36 | ||
| Output Short-Circuit Current | ISC | -30 | -160 | mA | VOUT = 0.5 V, VCC = Max (Note 4) | 36 | |
| Supply Voltage (Commercial) | VCC | 4.75 | 5.25 | V | Commercial (C) devices, with respect to ground | 36 | |
| Supply Voltage (Industrial) | VCC | 4.5 | 5.5 | V | Industrial (I) devices, with respect to ground | 36 | |
| Ambient Temperature (Commercial) | TA | 0 | 70 | °C | Commercial (C) devices, operating in free air | 36 | |
| Ambient Temperature (Industrial) | TA | -40 | 85 | °C | Industrial (I) devices, operating in free air | 36 | |
| Storage Temperature | -65 | 150 | °C | 36 | |||
| Ambient Temperature with Power Applied | -55 | 100 | °C | 36 | |||
| Device Junction Temperature | 130 | °C | 36 | ||||
| Supply Voltage with Respect to Ground | VCC | -0.5 | 7 | V | 36 | ||
| DC Input Voltage | -0.5 | V | -0.5 V to VCC + 0.5 V | 36 | |||
| Static Discharge Voltage | 2000 | V | 36 | ||||
| Latchup Current | 200 | mA | TA = -40°C to +85°C | 36 | |||
| Input capacitance | CIN | 6 | pF | VIN=2.0 V 3.3 V or 5 V, 25°C, 1 MHz | 40 | ||
| Output capacitance | CI/O | 8 | pF | VOUT=2.0V 3.3 V or 5 V, 25°C, 1 MHz | 40 |
CAD (KiCad official)
- Symbol:
M4A5-32 - Footprint:
Package_QFP:TQFP-44_10x10mm_P0.8mm - 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
m4a5-32-etched.step/m4a5-32-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m4a5-32.step/m4a5-32.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lattice datasheet (62 pp, sha256
ad1db1517042519b, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).