M34E02-FDW6TP

{
  "slug": "m34e02-fdw6tp",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "m34e02-fdw6tp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "m34e02-fdw6tp.kicad_sym",
    "m34e02-fdw6tp.kicad_mod",
    "m34e02-fdw6tp.glb",
    "m34e02-fdw6tp.step",
    "m34e02-fdw6tp.lbr",
    "docs/hero.png",
    "docs/m34e02-fdw6tp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "m34e02-fdw6tp-hero.glb",
    "m34e02-fdw6tp-hero.overlay.json"
  ],
  "component": {
    "mpn": "M34E02-FDW6TP",
    "manufacturer": "STMicroelectronics",
    "package": "TSSOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881543268220928",
    "parts": {
      "symbol": "m34e02-fdw6tp.kicad_sym",
      "footprint": "m34e02-fdw6tp.kicad_mod",
      "model_3d": "m34e02-fdw6tp-hero.glb",
      "model_3d_plain": "m34e02-fdw6tp.glb",
      "model_3d_step": "m34e02-fdw6tp-etched.step",
      "model_3d_step_plain": "m34e02-fdw6tp.step",
      "lbr": "m34e02-fdw6tp.lbr"
    },
    "distributor_links": {
      "lcsc": "C283450",
      "digikey": "497-17907-2-ND",
      "mouser": "511-M34E02-FDW6TP"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T01:11:11Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-17907-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-M34E02-FDW6TP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "E0",
        "type": "input",
        "description": "Chip Enable input that sets bit b1 of the 7-bit device select code and must be connected directly to VCC or VSS; when unconnected an internal pull-down makes it 0, and it is also used to detect the VHV voltage when decoding an SWP or CWP instruction."
      },
      {
        "number": "2",
        "name": "E1",
        "type": "input",
        "description": "Chip Enable input that sets bit b2 of the 7-bit device select code and must be connected directly to VCC or VSS; when unconnected an internal pull-down makes it 0."
      },
      {
        "number": "3",
        "name": "E2",
        "type": "input",
        "description": "Chip Enable input that sets bit b3 of the 7-bit device select code and must be connected directly to VCC or VSS; when unconnected an internal pull-down makes it 0."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Open-drain serial data line used to transfer data in or out of the device, which may be wire-OR'ed with other open-drain or open-collector signals and requires a pull-up resistor to VCC."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input that strobes all data in and out of the device; a pull-up to VCC is only needed if slave clock stretching is used, otherwise a push-pull bus master is sufficient."
      },
      {
        "number": "7",
        "name": "WC",
        "type": "input",
        "description": "Write Control input that, when tied to VCC (for example), write-protects the entire memory area."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage: 1.7 V to 5.5 V for temperature range 6 devices (1.7 V to 3.6 V for temperature range 1), with an absolute maximum of 6.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers were assigned from Figure 2 (TSSOP and MLP connections, top view), whose text layer is s; The datasheet only describes WC in prose (page 6) and in the signal table (page 7); it gives no elec"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0669,
        "at": "2026-10-08T01:10:52"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881543268220928",
        "pages": 36,
        "sha256": "67a2476224d1131e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "m34e02-fdw6tp.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cf28a51742b2e31065e201d1b313207140cbfb49062efd938788f7a310d02738",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "m34e02-fdw6tp-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "858b8704114e1b4738dd6595377685bdf6b09ef1b83136ffecd8c4e74837cad7",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}