main
Ray Publish 0.1.0 80aa0b0

M3062LFGPGP#U3C

RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)

M3062LFGPGP#U3C from RENESAS, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P9_4 bidirectional Port P9_4 is a CMOS I/O pin with a direction register that also serves as the TB4IN timer B input and the DA1 D/A converter output.
2 P9_3 bidirectional Port P9_3 is a CMOS I/O pin with a direction register that also serves as the TB3IN timer B input and the DA0 D/A converter output.
3 P9_2 bidirectional Port P9_2 is a CMOS I/O pin with a direction register that also serves as the TB2IN timer B input and the SOUT3 serial data output.
4 P9_1 bidirectional Port P9_1 is a CMOS I/O pin with a direction register that also serves as the TB1IN timer B input and the SIN3 serial data input.
5 P9_0 bidirectional Port P9_0 is a CMOS I/O pin with a direction register that also serves as the TB0IN timer B input and the CLK3 transfer clock I/O.
6 BYTE input External data bus width select input: the data bus is 16 bits long when held L and 8 bits long when held H, and it is connected to VSS in single-chip mode.
7 CNVSS input Processor mode switch: connect to VSS to start up in single-chip mode or to VCC1 to start up in microprocessor mode.
8 XCIN input Sub clock oscillator input: connect a crystal between XCIN and XCOUT, or input an external clock here with XCOUT left open; it also serves as port P8_7.
9 XCOUT output Sub clock oscillator output: connect a crystal between XCIN and XCOUT, or leave it open when an external clock is input on XCIN; it also serves as port P8_6.
10 RESET input Reset input: the microcomputer is in a reset state while L is applied to this pin.
11 XOUT output Main clock oscillator output: connect a ceramic resonator or crystal between XIN and XOUT, or leave it open when an external clock is input on XIN.
12 VSS power_in Ground pin: apply 0 V to the VSS pin.
13 XIN input Main clock oscillator input: connect a ceramic resonator or crystal between XIN and XOUT, or input an external clock here with XOUT left open.
14 VCC1 power_in Power supply input: apply 2.7 to 5.5 V to VCC1 and keep VCC1 at or above VCC2.
15 P8_5 input Input-only port P8_5 is the NMI interrupt input, and its state can be read from the P8 register.
16 P8_4 bidirectional Port P8_4 is an I/O pin that also serves as the INT2 interrupt input and the ZP Z-phase input.
17 P8_3 bidirectional Port P8_3 is an I/O pin that also serves as the INT1 interrupt input.
18 P8_2 bidirectional Port P8_2 is an I/O pin that also serves as the INT0 interrupt input.
19 P8_1 bidirectional Port P8_1 is an I/O pin that also serves as the TA4IN timer A4 input and the U three-phase motor control output.
20 P8_0 bidirectional Port P8_0 is an I/O pin that also serves as the TA4OUT timer A4 I/O and the U three-phase motor control output.
21 P7_7 bidirectional Port P7_7 is an I/O pin that also serves as the TA3IN timer A3 input.
22 P7_6 bidirectional Port P7_6 is an I/O pin that also serves as the TA3OUT timer A3 I/O.
23 P7_5 bidirectional Port P7_5 is an I/O pin that also serves as the TA2IN timer A2 input and the W three-phase motor control output.
24 P7_4 bidirectional Port P7_4 is an I/O pin that also serves as the TA2OUT timer A2 I/O and the W three-phase motor control output.
25 P7_3 bidirectional Port P7_3 is an I/O pin that also serves as the TA1IN/V timer input, the CTS2/RTS2 serial control, and the V three-phase output.
26 P7_2 bidirectional Port P7_2 is an I/O pin that also serves as the TA1OUT/V timer A1 I/O, the CLK2 transfer clock I/O, and the V three-phase output.
27 P7_1 bidirectional Port P7_1 has an N-channel open-drain output and also serves as the RXD2/SCL2 serial input, the TA0IN/TB5IN timer input.
28 P7_0 bidirectional Port P7_0 has an N-channel open-drain output and also serves as the TXD2/SDA2 serial output and the TA0OUT timer A0 I/O.
29 P6_7 bidirectional Port P6_7 is a CMOS I/O pin with a direction register that also serves as the TXD1/SDA1 serial output and I2C data pin.
30 P6_6 bidirectional Port P6_6 is a CMOS I/O pin with a direction register that also serves as the RXD1/SCL1 serial input and I2C clock pin.
31 P6_5 bidirectional Port P6_5 is a CMOS I/O pin with a direction register that also serves as the CLK1 transfer clock I/O.
32 P6_4 bidirectional Port P6_4 is a CMOS I/O pin with a direction register that also serves as the CTS1/RTS1/CTS0/CLKS1 serial control and clock output pin.
33 P6_3 bidirectional Port P6_3 is a CMOS I/O pin with a direction register that also serves as the TXD0/SDA0 serial data output and I2C data pin.
34 P6_2 bidirectional Port P6_2 is a CMOS I/O pin with a direction register that also serves as the RXD0/SCL0 serial input and I2C clock pin.
35 P6_1 bidirectional Port P6_1 is a CMOS I/O pin with a direction register that also serves as the CLK0 transfer clock I/O.
36 P6_0 bidirectional Port P6_0 is a CMOS I/O pin with a direction register that also serves as the CTS0/RTS0 serial control pin.
37 P5_7 bidirectional Port P5_7 is an I/O pin that also serves as the RDY input, where L places the microcomputer in a wait state, and the CLKOUT clock output.
38 P5_6 bidirectional Port P5_6 is an I/O pin that also serves as the ALE output, the signal used to latch the address.
39 P5_5 bidirectional Port P5_5 is an I/O pin that also serves as the HOLD input, where L places the microcomputer in a hold state.
40 P5_4 bidirectional Port P5_4 is an I/O pin that also serves as the HLDA output, which outputs L in a hold state.
41 P5_3 bidirectional Port P5_3 is an I/O pin that also serves as the BCLK output.
42 P5_2 bidirectional Port P5_2 is an I/O pin that also serves as the RD output, which goes L when reading external memory space.
43 P5_1 bidirectional Port P5_1 is an I/O pin that also serves as the WRH/BHE output, selected by program for WRH or BHE operation.
44 P5_0 bidirectional Port P5_0 is an I/O pin that also serves as the WRL/WR output, selected by program for WRL or WR operation.
45 P4_7 bidirectional Port P4_7 is an I/O pin that also serves as the CS3 chip-select output for an external space.
46 P4_6 bidirectional Port P4_6 is an I/O pin that also serves as the CS2 chip-select output for an external space.
47 P4_5 bidirectional Port P4_5 is an I/O pin that also serves as the CS1 chip-select output for an external space.
48 P4_4 bidirectional Port P4_4 is an I/O pin that also serves as the CS0 chip-select output for an external space.
49 P4_3 bidirectional Port P4_3 is an I/O pin that also serves as the A19 address output for the external bus.
50 P4_2 bidirectional Port P4_2 is an I/O pin that also serves as the A18 address output for the external bus.
51 P4_1 bidirectional Port P4_1 is an I/O pin that also serves as the A17 address output for the external bus.
52 P4_0 bidirectional Port P4_0 is an I/O pin that also serves as the A16 address output for the external bus.
53 P3_7 bidirectional Port P3_7 is an I/O pin that also serves as the A15 address output for the external bus.
54 P3_6 bidirectional Port P3_6 is an I/O pin that also serves as the A14 address output for the external bus.
55 P3_5 bidirectional Port P3_5 is an I/O pin that also serves as the A13 address output for the external bus.
56 P3_4 bidirectional Port P3_4 is an I/O pin that also serves as the A12 address output for the external bus.
57 P3_3 bidirectional Port P3_3 is an I/O pin that also serves as the A11 address output for the external bus.
58 P3_2 bidirectional Port P3_2 is an I/O pin that also serves as the A10 address output for the external bus.
59 P3_1 bidirectional Port P3_1 is an I/O pin that also serves as the A9 address output for the external bus.
60 VCC2 power_in Power supply for the external bus and bus control pins: apply 2.7 to 5.5 V and keep VCC1 at or above VCC2.
61 P3_0 bidirectional Port P3_0 is an I/O pin that also serves as the A8 address output and the multiplexed D7 data pin in external bus modes.
62 VSS power_in Ground pin: apply 0 V to the VSS pin.
63 P2_7 bidirectional Port P2_7 is an I/O pin that also serves as the AN2_7 analog input and the A7 address output multiplexed with D7/D6.
64 P2_6 bidirectional Port P2_6 is an I/O pin that also serves as the AN2_6 analog input and the A6 address output multiplexed with D6/D5.
65 P2_5 bidirectional Port P2_5 is an I/O pin that also serves as the AN2_5 analog input and the A5 address output multiplexed with D5/D4.
66 P2_4 bidirectional Port P2_4 is an I/O pin that also serves as the AN2_4 analog input and the A4 address output multiplexed with D4/D3.
67 P2_3 bidirectional Port P2_3 is an I/O pin that also serves as the AN2_3 analog input and the A3 address output multiplexed with D3/D2.
68 P2_2 bidirectional Port P2_2 is an I/O pin that also serves as the AN2_2 analog input and the A2 address output multiplexed with D2/D1.
69 P2_1 bidirectional Port P2_1 is an I/O pin that also serves as the AN2_1 analog input and the A1 address output multiplexed with D1/D0.
70 P2_0 bidirectional Port P2_0 is an I/O pin that also serves as the AN2_0 analog input and the A0 address output multiplexed with D0.
71 P1_7 bidirectional Port P1_7 is an I/O pin that also serves as the INT5 interrupt input and the D15 data bus pin.
72 P1_6 bidirectional Port P1_6 is an I/O pin that also serves as the INT4 interrupt input and the D14 data bus pin.
73 P1_5 bidirectional Port P1_5 is an I/O pin that also serves as the INT3 interrupt input and the D13 data bus pin.
74 P1_4 bidirectional Port P1_4 is an I/O pin that also serves as the D12 data bus pin.
75 P1_3 bidirectional Port P1_3 is an I/O pin that also serves as the D11 data bus pin.
76 P1_2 bidirectional Port P1_2 is an I/O pin that also serves as the D10 data bus pin.
77 P1_1 bidirectional Port P1_1 is an I/O pin that also serves as the D9 data bus pin.
78 P1_0 bidirectional Port P1_0 is an I/O pin that also serves as the D8 data bus pin.
79 P0_7 bidirectional Port P0_7 is an I/O pin that also serves as the AN0_7 analog input and the D7 data bus pin.
80 P0_6 bidirectional Port P0_6 is an I/O pin that also serves as the AN0_6 analog input and the D6 data bus pin.
81 P0_5 bidirectional Port P0_5 is an I/O pin that also serves as the AN0_5 analog input and the D5 data bus pin.
82 P0_4 bidirectional Port P0_4 is an I/O pin that also serves as the AN0_4 analog input and the D4 data bus pin.
83 P0_3 bidirectional Port P0_3 is an I/O pin that also serves as the AN0_3 analog input and the D3 data bus pin.
84 P0_2 bidirectional Port P0_2 is an I/O pin that also serves as the AN0_2 analog input and the D2 data bus pin.
85 P0_1 bidirectional Port P0_1 is an I/O pin that also serves as the AN0_1 analog input and the D1 data bus pin.
86 P0_0 bidirectional Port P0_0 is an I/O pin that also serves as the AN0_0 analog input and the D0 data bus pin.
87 P10_7 bidirectional Port P10_7 is an I/O pin that also serves as the KI3 key input interrupt and the AN7 analog input.
88 P10_6 bidirectional Port P10_6 is an I/O pin that also serves as the KI2 key input interrupt and the AN6 analog input.
89 P10_5 bidirectional Port P10_5 is an I/O pin that also serves as the KI1 key input interrupt and the AN5 analog input.
90 P10_4 bidirectional Port P10_4 is an I/O pin that also serves as the KI0 key input interrupt and the AN4 analog input.
91 P10_3 bidirectional Port P10_3 is an I/O pin that also serves as the AN3 analog input for the A/D converter.
92 P10_2 bidirectional Port P10_2 is an I/O pin that also serves as the AN2 analog input for the A/D converter.
93 P10_1 bidirectional Port P10_1 is an I/O pin that also serves as the AN1 analog input for the A/D converter.
94 AVSS power_in Analog ground for the A/D converter: connect the AVSS pin to VSS.
95 P10_0 bidirectional Port P10_0 is an I/O pin that also serves as the AN0 analog input for the A/D converter.
96 VREF power_in Reference voltage input for the A/D converter and D/A converter.
97 AVCC power_in Analog power supply for the A/D converter: connect the AVCC pin to VCC1.
98 P9_7 bidirectional Port P9_7 is an I/O pin that also serves as the SIN4 serial data input and the ADTRG A/D trigger input.
99 P9_6 bidirectional Port P9_6 is an I/O pin that also serves as the SOUT4 serial data output and the ANEX1 extended analog input for the A/D converter.
100 P9_5 bidirectional Port P9_5 is an I/O pin that also serves as the CLK4 transfer clock I/O and the ANEX0 extended analog I/O for the A/D converter.

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC1, VCC2 -0.3 6.5 V VCC1=AVCC 42
Supply Voltage VCC2 -0.3 V upper limit printed as VCC1+0.1 V 42
Analog Supply Voltage AVCC -0.3 6.5 V VCC1=AVCC 42
Input Voltage P7_0, P7_1 VI -0.3 6.5 V P7_0, P7_1 42
Power Dissipation Pd 300 mW −40°C<Topr≤85°C 42
Operating Ambient Temperature Topr -20 85 °C When the Microcomputer is Operating; alternate range -40 to 85 °C printed 42
Operating Ambient Temperature Topr -40 85 °C When the Microcomputer is Operating; alternate range printed 42
Operating Ambient Temperature Flash Program Erase Topr 0 60 °C Flash Program Erase 42
Storage Temperature Tstg -65 150 °C 42
Supply Voltage VCC1, VCC2 2.7 5 5.5 V VCC1 ≥ VCC2 43
Main Clock Input Oscillation Frequency f(XIN) 0 16 MHz VCC1=3.0V to 5.5V 44
Sub-Clock Oscillation Frequency f(XCIN) 32.768 50 kHz 44
On-chip Oscillation Frequency f(Ring) 0.5 1 2 MHz 44
PLL Clock Oscillation Frequency f(PLL) 10 24 MHz VCC1=3.0V to 5.5V 44
CPU Operation Clock f(BCLK) 0 24 MHz 44
PLL Frequency Synthesizer Stabilization Wait Time tSU(PLL) 20 ms VCC1=5.5V 44
PLL Frequency Synthesizer Stabilization Wait Time tSU(PLL) 50 ms VCC1=3.0V 44
Resolution 10 Bits VREF=VCC1 45
Integral Non-Linearity Error INL -3 3 LSB 10bit VREF=VCC1=5V, AN0 to AN7 input 45
Differential Non-Linearity Error DNL -1 1 LSB 45
Offset Error -3 3 LSB 45
Gain Error -3 3 LSB 45
Ladder Resistance RLADDER 10 40 kΩ VREF=VCC1 45
Absolute Accuracy -1 1 % D/A converter, one converter used 46
Output Resistance RO 4 10 20 kΩ 46
Reference Power Supply Input Current IVREF 1.5 mA one D/A converter used, unused D/A register set to 00h 46
Word Program Time 25 200 µs VCC1=5.0V 47
Block Erase Time 4-Kbyte block 0.3 4 s VCC1=5.0V 47
Low Voltage Detection Voltage Vdet4 3.3 3.8 4.4 V VCC1=0.8V to 5.5V 48
Reset Level Detection Voltage Vdet3 2.2 2.8 3.6 V 48
Low Voltage Reset Release Voltage Vdet3r 2.2 2.9 4 V 48
Low Voltage Reset Retention Voltage Vdet3s 0.8 V 48
Time for Internal Power Supply Stabilization During Powering-On td(P-R) 2 ms VCC1=2.7V to 5.5V 48
Brown-out Detection Reset Release Wait Time td(S-R) 20 ms VCC1=Vdet3r to 5.5V 48
LOW Output Voltage P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7, P11_0 to P11_7, P14_0, P14_1 VOL 2 V IOL=5mA 50
LOW Output Voltage P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P12_0 to P12_7, P13_0 to P13_7 VOL 2 V IOL=5mA (2) 50
LOW Output Voltage P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7, P11_0 to P11_7, P14_0, P14_1 VOL 0.45 V IOL=200µA 50
LOW Output Voltage P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P12_0 to P12_7, P13_0 to P13_7 VOL 0.45 V IOL=200µA (2) 50
LOW Output Voltage XOUT HIGHPOWER VOL 2 V IOL=1mA 50
Hysteresis HOLD, RDY, TA0IN to TA4IN, TB0IN to TB5IN, INT0 to INT5, NMI, ADTRG, CTS0 to CTS2, CLK0 to CLK4, TA0OUT to TA4OUT, KI0 to KI3, RXD0 to RXD2, SCL0 to SCL2, SDA0 to SDA2, SIN3, SIN4 VT+-VT- 0.2 1 V 50
Hysteresis RESET VT+-VT- 0.2 2.5 V 50
HIGH Input Current IIH 5 µA VI=5V 50
LOW Input Current IIL -5 µA VI=0V 50
Pull-Up Resistance RPULLUP 30 50 170 kΩ VI=0V 50
Feedback Resistance XIN RfXIN 1.5 MΩ 50
RAM Retention Voltage VRAM 2 V At stop mode 50
Power Supply Current ICC 14 20 mA VCC1=VCC2=4.0V to 5.5V; mask ROM; f(BCLK)=24MHz, No division, PLL operation 51
Power Supply Current ICC 1 mA VCC1=VCC2=4.0V to 5.5V; mask ROM; No division, On-chip oscillation 51
Power Supply Current ICC 18 27 mA VCC1=VCC2=4.0V to 5.5V; Flash Memory; f(BCLK)=24MHz, No division, PLL operation 51
Stop mode Power Supply Current 0.8 3 µA Topr =25°C 51
Low Voltage Detection Dissipation Current Idet4 0.7 4 µA VC27 bit in VCR2 register 51
External Clock Input Cycle Time tc 62.5 ns XIN input 52
External Clock Input HIGH Pulse Width tw(H) 25 ns XIN input 52
External Clock Input LOW Pulse Width tw(L) 25 ns XIN input 52
Data Input Setup Time tsu(DB-RD) 40 ns 52
TAiIN Input Cycle Time tc(TA) 100 ns Counter Input in Event Counter Mode 53
CLKi Input Cycle Time tc(CK) 200 ns Serial Interface 54
TXDi Output Delay Time td(C-Q) 80 ns Serial Interface 54
RXDi Input Setup Time tsu(D-C) 70 ns Serial Interface 54
INTi Input HIGH Pulse Width tw(INH) 250 ns External Interrupt INTi Input 54

CAD (KiCad official)

  • Symbol: M3062LFGPGP#U3C
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: m3062lfgpgp-u3c-etched.step / m3062lfgpgp-u3c-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m3062lfgpgp-u3c.step / m3062lfgpgp-u3c.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (103 pp, sha256 60165704303e04cb, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF