main
Ray Publish 0.1.0 7184ef2

M24M01E-FMN6TP

STMICROELECTRONICS · Global Sourcing Parts · SO-8-150mil

M24M01E-FMN6TP from STMICROELECTRONICS, in a SO-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected; the datasheet lists NC pins in the 8-pin connection diagram and does not assign them a function.
2 NC unconnected Not connected; the datasheet lists NC pins in the 8-pin connection diagram and does not assign them a function.
3 NC unconnected Not connected; the datasheet lists NC pins in the 8-pin connection diagram and does not assign them a function.
4 VSS power_in Ground, the reference for the VCC supply voltage.
5 SDA bidirectional Serial data I/O; open-drain output that may be wired-AND with other open-drain or open-collector signals, and requires a pull-up resistor to VCC.
6 SCL input Serial clock input used to strobe data on SDA(in) and to output data on SDA(out).
7 WC input Write control: driving WC high disables all write operations (device select and address bytes are acknowledged, data bytes are not); driving it low or leaving it floating enables writes.
8 VCC power_in Supply voltage, 1.6 V to 5.5 V per the operating conditions in Table 13.

Key specifications

Parameter Value
Manufacturer STMICROELECTRONICS
Package SO-8-150mil
Category Global Sourcing Parts
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Absolute maximum storage temperature TSTG -65 150 °C 33
DC output current (SDA = 0) IOL 5 mA SDA = 0 33
Input or output range VIO -0.5 6.5 V 33
Supply voltage (absolute maximum) VCC -0.5 6.5 V 33
Electrostatic pulse (human body model) VESD 4000 V Human body model 33
Supply voltage VCC 1.6 5.5 V 34
Ambient operating temperature TA -40 85 °C 34
Operating clock frequency fC 1 MHz 34
Input capacitance (SDA) CIN 8 pF 34
Input capacitance (other pins) CIN 6 pF 34
Input impedance (WC) ZL 30 kΩ VIN < 0.3 VCC 34
Input impedance (WC) ZH 500 kΩ VIN > 0.7 VCC 34
Data retention 200 Year TA = 55 °C 35
Input leakage current (SCL, SDA) ILI -2 2 µA VIN = VSS or VCC; device in standby mode 35
Output leakage current ILO -2 2 µA SDA in high-Z, external voltage applied on SDA: VSS or VCC 35
Supply current (Read) ICC 0.5 mA fC = 400 kHz 35
Supply current (Read) ICC 1 mA fC = 1 MHz 35
Supply current (write) ICC0 1 mA Averaged on TW, VCC ≤ 3.3 V 35
Supply current (write) ICC0 1.5 mA Averaged on TW, VCC > 3.3 V 35
Standby supply current ICC1 1 µA Device not selected; VIN = VSS or VCC; VCC < 2.5 V 35
Standby supply current ICC1 2 µA Device not selected; VIN = VSS or VCC; VCC ≥ 2.5 V 35
Input low voltage (SCL, SDA, WC) VIL -0.45 V 1.6 V ≤ VCC < 2.5 V 35
Input high voltage (SCL, SDA) VIH 6.5 V 1.6 V ≤ VCC < 2.5 V 35
Output low voltage VOL 0.2 V IOL = 1 mA, VCC = 1.6 V 35
Output low voltage VOL 0.4 V IOL = 2.1 mA, VCC = 2.5 V or IOL = 3 mA, VCC = 5.5 V 35
Clock frequency (Fast-mode) fC 400 kHz 36
Clock pulse width high tCHCL 600 ns 36
Clock pulse width low tCLCH 1300 ns 36
SDA (out) fall time tQL1QL2 20 300 ns With CL = 10 pF 36
Data in setup time tDXCH 100 ns 36
Data in hold time tCLDX 0 ns 36
Data out hold time tCLQX 100 ns 36
Clock low to next data valid (access time) tCLQV 900 ns 36
Start condition setup time tCHDL 600 ns 36
Start condition hold time tDLCL 600 ns 36
Stop condition set up time tCHDH 600 ns 36
Time between Stop condition and next Start condition tDHDL 1300 ns 36
WC set up time (before the start condition) tWLDL 0 μs WC = 0 to enable write command 36
WC hold time (after the stop condition) tDHWH 1 μs WC = 0 to enable write command 36
Write cycle time tW 3 4 ms 36
Wake-up time tWU 5 μs Delay from VCC(min) stable to first accepted command 36
Clock pulse width high tCHCL 260 ns Fast-mode Plus 37
Clock pulse width low tCLCH 500 ns Fast-mode Plus 37
SDA (out) fall time tQL1QL2 20 120 ns With CL = 10 pF 37
Data in setup time tDXCH 50 ns Fast-mode Plus 37
Data in hold time tCLDX 0 ns Fast-mode Plus 37
Data out hold time tCLQX 100 ns Fast-mode Plus 37
Clock low to next data valid (access time) tCLQV 450 ns Fast-mode Plus 37
Start condition setup time tCHDL 250 ns Fast-mode Plus 37
Start condition hold time tDLCL 250 ns Fast-mode Plus 37
Stop condition setup time tCHDH 250 ns Fast-mode Plus 37
Time between Stop condition and next Start condition tDHDL 500 ns Fast-mode Plus 37
WC set up time (before the start condition) tWLDL 0 μs WC = 0 to enable write command; Fast-mode Plus 37
WC hold time (after the stop condition) tDHWH 1 μs WC = 0 to enable write command; Fast-mode Plus 37
Write cycle time tW 3 4 ms Fast-mode Plus 37
Wake-up time tWU 5 μs Fast-mode Plus; delay from VCC(min) stable to first accepted command 37

CAD (KiCad official)

  • Symbol: M24M01E-FMN6TP
  • Footprint: Package_SO:SO-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8-150mil (KiCad packages3D, STEP)
  • 3D model files: m24m01e-fmn6tp-etched.step / m24m01e-fmn6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m24m01e-fmn6tp.step / m24m01e-fmn6tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMICROELECTRONICS datasheet (56 pp, sha256 b853784a4b274734, retrieved 2026-11-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF