component
M24M01-RMN6P
Public Made by Adomby adom
STMicroelectronics Global Sourcing Parts, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM24M01-RMN6P
STMicroelectronics · Global Sourcing Parts · SOP-8
M24M01-RMN6P from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E1 | input | Chip Enable input that sets the value looked for on bit b2 of the 7-bit device select code; must be tied to VCC or VSS (read as low if left floating). |
| 2 | E2 | input | Chip Enable input that sets the value looked for on bit b3 of the 7-bit device select code; must be tied to VCC or VSS (read as low if left floating). |
| 3 | DU | unconnected | Don't Use pin; no signal should be applied to it, and if it is connected it must be tied to VSS. |
| 4 | VSS | power_in | Ground pin; it is the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial Data input/output, an open-drain line used to transfer data into and out of the device; requires an external pull-up resistor. |
| 6 | SCL | input | Serial Clock input used to strobe data in on SDA(in) and clock data out on SDA(out). |
| 7 | WC | input | Write Control input; when driven high, writes to the entire memory array are disabled (data bytes are not acknowledged); when driven low or left floating, write operations are enabled. |
| 8 | VCC | power_in | Supply voltage input; must be within the specified VCC(min) to VCC(max) operating range and decoupled with a 10 nF-100 nF capacitor close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-8 |
| Category | Global Sourcing Parts |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24M01-RMN6P - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
m24m01-rmn6p-etched.step/m24m01-rmn6p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24m01-rmn6p.step/m24m01-rmn6p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (47 pp, sha256
2fcf2a055ea9b4cc, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).