main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs m24c64-wmn6tp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers m24c64-wmn6tp: viewers · Ray
m24c64-wmn6tp-etched.fit.json m24c64-wmn6tp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
m24c64-wmn6tp-etched.glb m24c64-wmn6tp: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo… · Ray
m24c64-wmn6tp-etched.step m24c64-wmn6tp: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo… · Ray
m24c64-wmn6tp.glb Publish 0.1.0 · Ray
m24c64-wmn6tp.kicad_mod Publish 0.1.0 · Ray
m24c64-wmn6tp.kicad_sym Publish 0.1.0 · Ray
m24c64-wmn6tp.lbr Publish 0.1.0 · Ray
m24c64-wmn6tp.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json m24c64-wmn6tp: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo… · Ray
README.md m24c64-wmn6tp: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

M24C64-WMN6TP

STMicroelectronics · EEPROM · SOIC-8

M24C64-WMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 E0 input Chip enable address input bit 0. Sets bit b1 of the 7-bit I2C device select code; must be tied to VCC or VSS. Left floating it is read as 0.
2 E1 input Chip enable address input bit 1. Sets bit b2 of the 7-bit I2C device select code; must be tied to VCC or VSS. Left floating it is read as 0.
3 E2 input Chip enable address input bit 2. Sets bit b3 of the 7-bit I2C device select code; must be tied to VCC or VSS. Left floating it is read as 0.
4 VSS power_in Ground reference for the VCC supply voltage.
5 SDA bidirectional I2C serial data input/output. Open-drain output; requires an external pull-up resistor to VCC. Transfers device select code, address bytes, and data bytes in and out of the EEPROM.
6 SCL input I2C serial clock input. Strobes the data available on SDA (input) and clocks the data driven on SDA (output).
7 WC input Write control (active-low, /WC). Driving this pin high inhibits all write operations to the memory array (data bytes are not acknowledged). Driving low or leaving floating enables writes.
8 VCC power_in Positive supply voltage. Range depends on variant: 2.5-5.5 V (M24C64-W), 1.8-5.5 V (M24C64-R), 1.7-5.5 V (M24C64-F/-DF). Decouple with 10-100 nF close to the VCC/VSS pins.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-8
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • M24C64-WMN6TP
  • M24C64-WMN6TPDW6T
  • M24C64-WMN6TPDW6TP
  • M24C64-WMN6TPBN6
  • M24C64-WMN6TPBN6P
  • M24C64-WMN6TPMC6T
  • M24C64-WMN6TPMC6TP
  • M24C64-WMN6TPCS6TP
  • M24C64-WMN6TPCS6TP/K
  • M24C64-WMN6TPCT6TP
  • M24C64-WMN6TPCT6TP/K

CAD (KiCad official)

  • Symbol: M24C64-WMN6TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: m24c64-wmn6tp-etched.step / m24c64-wmn6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m24c64-wmn6tp.step / m24c64-wmn6tp.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
m24c64-wmn6tp.step 122 KB You want the bare part, or you mark your own boards.
m24c64-wmn6tp-etched.step 2.2 MB You want the part with M24C64-WMN6TP already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 563 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (42 pp, sha256 089bf32b0c1e84ce, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF