component
M24C64-RMN6P
Public Made by Adomby adom
STMicroelectronics EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM24C64-RMN6P
STMicroelectronics · EEPROM · SOIC-8
M24C64-RMN6P from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip Enable input; sets the value compared against bit b1 of the 7-bit device select code, must be tied to VCC or VSS (read as low if left floating). |
| 2 | E1 | input | Chip Enable input; sets the value compared against bit b2 of the 7-bit device select code, must be tied to VCC or VSS (read as low if left floating). |
| 3 | E2 | input | Chip Enable input; sets the value compared against bit b3 of the 7-bit device select code, must be tied to VCC or VSS (read as low if left floating). |
| 4 | VSS | power_in | Ground pin, the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial Data input/output for transferring data to and from the device; SDA(out) is an open-drain output requiring an external pull-up resistor to VCC. |
| 6 | SCL | input | Serial Clock input used to strobe data on SDA in and to clock data out on SDA. |
| 7 | WC | input | Write Control input; when driven high it disables write operations to the entire memory array, when driven low or left floating write operations are enabled. |
| 8 | VCC | power_in | Supply voltage input; for the -R voltage range device, operating range is 1.8 V to 5.5 V over -40°C to +85°C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24C64-RMN6P - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
m24c64-rmn6p-etched.step/m24c64-rmn6p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c64-rmn6p.step/m24c64-rmn6p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (54 pp, sha256
297d3d80b153effd, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).