main
Ray
Publish 0.1.1
3feaaf1
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191
{
"slug": "m24c64-rdw6tp",
"version": "0.1.1",
"type": "component",
"description": "STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"memory",
"m24c64-rdw6tp",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"m24c64-rdw6tp.kicad_sym",
"m24c64-rdw6tp.kicad_mod",
"m24c64-rdw6tp.glb",
"m24c64-rdw6tp.step",
"m24c64-rdw6tp.lbr",
"docs/hero.png",
"docs/m24c64-rdw6tp-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"m24c64-rdw6tp-hero.glb",
"m24c64-rdw6tp-hero.overlay.json",
"m24c64-rdw6tp-etched.step"
],
"component": {
"mpn": "M24C64-RDW6TP",
"manufacturer": "STMicroelectronics",
"package": "TSSOP-8",
"pin_count": 8,
"category": "Memory",
"subcategory": "EEPROM",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881581239119872",
"parts": {
"symbol": "m24c64-rdw6tp.kicad_sym",
"footprint": "m24c64-rdw6tp.kicad_mod",
"model_3d": "m24c64-rdw6tp-hero.glb",
"model_3d_plain": "m24c64-rdw6tp.glb",
"model_3d_step": "m24c64-rdw6tp-etched.step",
"model_3d_step_plain": "m24c64-rdw6tp.step",
"lbr": "m24c64-rdw6tp.lbr"
},
"distributor_links": {
"lcsc": "C189763",
"digikey": "497-8647-2-ND",
"mouser": "511-M24C64-RDW6TP"
},
"distributor_check": {
"checked_at": "2026-10-03T00:11:11Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "497-8647-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "511-M24C64-RDW6TP",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "E0",
"type": "input",
"description": "Chip Enable input that sets the least significant bit of the 3-bit device select address and must be tied to VCC or VSS."
},
{
"number": "2",
"name": "E1",
"type": "input",
"description": "Chip Enable input that sets the middle bit of the 3-bit device select address and must be tied to VCC or VSS."
},
{
"number": "3",
"name": "E2",
"type": "input",
"description": "Chip Enable input that sets the most significant bit of the 3-bit device select address and must be tied to VCC or VSS."
},
{
"number": "4",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for the device."
},
{
"number": "5",
"name": "SDA",
"type": "bidirectional",
"description": "Serial Data, a bi-directional open-drain I2C line that needs a pull-up resistor to VCC and can be wire-OR'ed with other open-drain signals on the bus."
},
{
"number": "6",
"name": "SCL",
"type": "input",
"description": "Serial Clock input that strobes all data in and out of the device, with a pull-up to VCC needed only if the master has an open-drain output."
},
{
"number": "7",
"name": "WC",
"type": "input",
"description": "Write Control input that disables writes to the entire memory array when driven High and is read internally as VIL (writes allowed) when unconnected."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage of 1.8 to 5.5V for the M24C64-R variant, which must be stable and valid before any logic signal is applied."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: SCL pin classified as 'input' per datasheet description, but technically supports clock stretching b"
],
"pages_sent": 26,
"cost_usd": 0.2328,
"at": "2026-10-03T00:10:44"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881581239119872",
"pages": 26,
"sha256": "fa246d73fbdb4aee",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "m24c64-rdw6tp-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
1.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "d9e5040cf28ccfcf66c2e56804299ba897a3e091e21d58f80a6c7727c90ffd31",
"checked": "2026-11-17",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"title": "M24C64-RDW6TP",
"brief": "STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"metadata": {
"specs": {
"Manufacturer": "STMicroelectronics",
"Package": "TSSOP-8",
"Category": "Memory",
"Pins": "8"
}
},
"discovery_triggers": [
"m24c64-rdw6tp"
],
"discovery_pitch": "M24C64-RDW6TP (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"visibility": "public"
}