main
Ray
m24c32-wmn6tp: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bo…
10d5be4
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167
{
"slug": "m24c32-wmn6tp",
"version": "0.1.0",
"type": "component",
"description": "STMicroelectronics EEPROM, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"memory",
"m24c32-wmn6tp"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"m24c32-wmn6tp.kicad_sym",
"m24c32-wmn6tp.kicad_mod",
"m24c32-wmn6tp.glb",
"m24c32-wmn6tp.step",
"m24c32-wmn6tp.lbr",
"docs/hero.png",
"docs/m24c32-wmn6tp-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"m24c32-wmn6tp-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "M24C32-WMN6TP",
"manufacturer": "STMicroelectronics",
"package": "SOIC-8",
"pin_count": 8,
"category": "EEPROM",
"datasheet": "https://www.st.com/resource/en/datasheet/m24c32-wmn6tp.pdf",
"parts": {
"symbol": "m24c32-wmn6tp.kicad_sym",
"footprint": "m24c32-wmn6tp.kicad_mod",
"model_3d": "m24c32-wmn6tp-etched.glb",
"model_3d_plain": "m24c32-wmn6tp.glb",
"model_3d_step": "m24c32-wmn6tp-etched.step",
"model_3d_step_plain": "m24c32-wmn6tp.step",
"lbr": "m24c32-wmn6tp.lbr"
},
"pins": [
{
"number": "1",
"name": "E0",
"type": "input",
"description": "Chip Enable address input bit 0. Ties to VCC or VSS to set the LSB (b1) of the 7-bit I²C device select code, allowing up to eight M24C32 devices on the same bus. When left floating, this input is read as low (0)."
},
{
"number": "2",
"name": "E1",
"type": "input",
"description": "Chip Enable address input bit 1. Ties to VCC or VSS to set bit b2 of the 7-bit I²C device select code. When left floating, this input is read as low (0)."
},
{
"number": "3",
"name": "E2",
"type": "input",
"description": "Chip Enable address input bit 2 (MSB of the chip-enable field). Ties to VCC or VSS to set bit b3 of the 7-bit I²C device select code. When left floating, this input is read as low (0)."
},
{
"number": "4",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for VCC and all logic signals. Connect to the system ground plane."
},
{
"number": "5",
"name": "SDA",
"type": "bidirectional",
"description": "Serial Data - bidirectional, open-drain I²C data line. Transfers address and data bytes in both directions. Requires an external pull-up resistor to VCC (value depends on bus capacitance; see Figure 5)."
},
{
"number": "6",
"name": "SCL",
"type": "input",
"description": "Serial Clock - I²C clock input driven by the bus master; strobes all data in and out of the device. Supports 400 kHz fast-mode I²C. A pull-up to VCC is only required if a slave stretches the clock; otherwise a push-pull master output is sufficient."
},
{
"number": "7",
"name": "WC",
"type": "input",
"description": "Write Control (hardware write-protect). When driven high, write operations to the entire memory array are inhibited (device-select and address bytes are still ACKed, but data bytes are not ACKed). When low or left unconnected (internally read as VIL), writes are enabled."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage input, 2.5 V to 5.5 V for the M24C32-W variant. Decouple with a 10-100 nF capacitor placed close to the VCC/VSS pins. Device holds a power-on-reset (POR) until VCC crosses the POR threshold."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C7998",
"digikey": "497-M24C32-WMN6TPTR-ND",
"mouser": "511-M24C32-WMN6TP"
},
"distributor_check": {
"checked_at": "2026-10-05T19:07:03Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": "497-M24C32-WMN6TPTR-ND",
"status": "found"
},
"mouser": {
"pn": "511-M24C32-WMN6TP",
"status": "found"
}
},
"models_3d": [
{
"file": "m24c32-wmn6tp.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "m24c32-wmn6tp-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "4777e3d6e537264098b13653c1ed5ccaa24274bdeb171b3462a03744fc251ac6",
"checked": "2026-11-03",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}