component
M24C32-RDW6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM24C32-RDW6TP
STMicroelectronics · EEPROM · TSSOP-8
M24C32-RDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip Enable input that sets the least significant bit of the device select code and must be tied to VCC or VSS, reading low if left floating. |
| 2 | E1 | input | Chip Enable input that sets the middle bit of the device select code and must be tied to VCC or VSS, reading low if left floating. |
| 3 | E2 | input | Chip Enable input that sets the most significant chip-enable bit of the device select code and must be tied to VCC or VSS, reading low if left floating. |
| 4 | VSS | power_in | Ground, the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial Data I/O with an open-drain output that can be wire-OR'ed and needs a pull-up resistor to VCC. |
| 6 | SCL | input | Serial Clock input that strobes data in on SDA and clocks data out on SDA. |
| 7 | WC | input | Write Control input that disables writes to the entire memory array when driven high and enables them when driven low or left floating. |
| 8 | VCC | power_in | Supply voltage of 1.8 V to 5.5 V for the M24C32-R, which should be decoupled with about 10 nF to 100 nF close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24C32-RDW6TP - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m24c32-rdw6tp-etched.step/m24c32-rdw6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c32-rdw6tp.step/m24c32-rdw6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (51 pp, sha256
8f13660da584f59c, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).