Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

M24C32-FDW6TP

STMicroelectronics · EEPROM · TSSOP-8 (ST TSSOP8)

M24C32-FDW6TP from STMicroelectronics, in a TSSOP-8 (ST TSSOP8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 E0 input Chip Enable input bit 0; sets the LSB (b1) of the 7-bit device select code; must be tied to VCC or VSS.
2 E1 input Chip Enable input bit 1; sets bit b2 of the 7-bit device select code; must be tied to VCC or VSS.
3 E2 input Chip Enable input bit 2; sets bit b3 of the 7-bit device select code; must be tied to VCC or VSS.
4 VSS power_in Ground; provides 0 V reference for device operation.
5 SDA bidirectional Serial Data line for I2C bus; open-drain output requiring pull-up resistor to VCC for transferring data in and out of the device.
6 SCL input Serial Clock input for I2C bus; strobes data available on SDA; compatible with 100 kHz, 400 kHz, and 1 MHz I2C modes.
7 WC input Write Control input; when driven high disables write operations to the entire memory array; write operations enabled when low or floating.
8 VCC power_in Supply voltage input; operating range 1.7 V to 5.5 V for M24C32-F over -40 °C to +85 °C ambient temperature.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-8 (ST TSSOP8)
Category Memory
Pins 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Lead temperature during soldering see note(1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST ECOPACK2® 23

CAD (Adom-generated)

  • Symbol: M24C32-FDW6TP
  • Footprint: Adom_Gen:STMicroelectronics_TSSOP8
  • 3D model: generated to fit the land (STEP)
  • 3D model files: m24c32-fdw6tp-etched.step / m24c32-fdw6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m24c32-fdw6tp.step / m24c32-fdw6tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet, copy hosted by JLCPCB (51 pp, sha256 8f13660da584f59c, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Its own sheet (sha 8f13660da584) prints no TSSOP8 land; ST's printed TSSOP8 land, M24512 DS6520 Rev 31 p.32 Figure 18 (TSSOP8 - Recommended footprint): 1.0 x 0.35 mm pads, pitch 0.65, 7.0 outer, rows 6.0 c-c. Same package: this part's own outline on record (M24C32-FDW6TP-dims.extracted.json, TSSOP8 p.37): body (2.9, 3.1) x (4.3, 4.5), lead span (6.2, 6.6), pitch 0.65 = ST TSSOP8 (D 2.9/3.0/3.1, E1 4.3/4.4/4.5, E 6.2/6.4/6.6, e 0.65). Shared land Adom_Gen:STMicroelectronics_TSSOP8. Task master ruling 2026-11-21 (ST TSSOP8).

Datasheet PDF