← Commit history

Initial commit: component/m24c32-dfmn6tp

Ray ·b313068f00 ·
2 files changed +202
README.mdadded+44
@@ -0,0 +1,44 @@+# M24C32-DFMN6TP++**STMicroelectronics** · EEPROM · SOP-8++M24C32-DFMN6TP from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | E0 | input | Chip Enable address bit b1; must be tied to VCC or VSS to set the least-significant bit of the 7-bit device select code; reads as 0 when left floating; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC ≥ 2.5 V). |+| 2 | E1 | input | Chip Enable address bit b2; must be tied to VCC or VSS to set the middle bit of the 7-bit device select code; reads as 0 when left floating; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC ≥ 2.5 V). |+| 3 | E2 | input | Chip Enable address bit b3; must be tied to VCC or VSS to set the most-significant chip-enable bit of the 7-bit device select code; reads as 0 when left floating; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC ≥ 2.5 V). |+| 4 | VSS | power_in | Ground; reference for the VCC supply voltage; decouple VCC to VSS with 10 nF-100 nF capacitor close to the package pins. |+| 5 | SDA | bidirectional | Serial Data I/O; open-drain output that may be wire-OR'd with other open-drain signals; requires external pull-up resistor to VCC; input capacitance max 8 pF; IOL max 5 mA (SDA = 0). |+| 6 | SCL | input | Serial Clock input; strobes data on SDA(in) and clocks data out on SDA(out); supports I²C clock frequencies up to 1 MHz (VCC ≥ 1.7 V); input capacitance max 6 pF. |+| 7 | WC | input | Write Control input; driving high disables write operations to the entire memory array (data bytes not acknowledged); driving low or leaving floating enables write operations; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC ≥ 2.5 V). |+| 8 | VCC | power_in | Supply voltage; operating range 1.7 V to 5.5 V over -40 °C to +85 °C (M24C32-F variant); must rise continuously from 0 V and remain stable throughout any write cycle tW (max 5 ms). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOP-8 |+| Category | Memory |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `M24C32-DFMN6TP`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)+- 3D model files: `m24c32-dfmn6tp-etched.step` / `m24c32-dfmn6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m24c32-dfmn6tp.step` / `m24c32-dfmn6tp.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939308674273280) (51 pp, sha256 `8f13660da584f59c`, retrieved 2026-09-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/m24c32-dfmn6tp-datasheet.pdf)
page.jsonadded+158
@@ -0,0 +1,158 @@+{+  "slug": "m24c32-dfmn6tp",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics EEPROM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "m24c32-dfmn6tp",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "m24c32-dfmn6tp.kicad_sym",+    "m24c32-dfmn6tp.kicad_mod",+    "m24c32-dfmn6tp.glb",+    "m24c32-dfmn6tp.step",+    "m24c32-dfmn6tp.lbr",+    "docs/hero.png",+    "docs/m24c32-dfmn6tp-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "M24C32-DFMN6TP",+    "manufacturer": "STMicroelectronics",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Memory",+    "subcategory": "EEPROM",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939308674273280",+    "parts": {+      "symbol": "m24c32-dfmn6tp.kicad_sym",+      "footprint": "m24c32-dfmn6tp.kicad_mod",+      "model_3d": "m24c32-dfmn6tp-etched.glb",+      "model_3d_plain": "m24c32-dfmn6tp.glb",+      "model_3d_step": "m24c32-dfmn6tp-etched.step",+      "model_3d_step_plain": "m24c32-dfmn6tp.step",+      "lbr": "m24c32-dfmn6tp.lbr"+    },+    "distributor_links": {+      "lcsc": "C2061187",+      "digikey": "497-15755-2-ND",+      "mouser": "511-M24C32-DFMN6TP"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T12:37:58Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-15755-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "511-M24C32-DFMN6TP",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "E0",+        "type": "input",+        "description": "Chip Enable address bit b1; must be tied to VCC or VSS to set the least-significant bit of the 7-bit device select code; reads as 0 when left floating; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC ≥ 2.5 V)."+      },+      {+        "number": "2",+        "name": "E1",+        "type": "input",+        "description": "Chip Enable address bit b2; must be tied to VCC or VSS to set the middle bit of the 7-bit device select code; reads as 0 when left floating; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC ≥ 2.5 V)."+      },+      {+        "number": "3",+        "name": "E2",+        "type": "input",+        "description": "Chip Enable address bit b3; must be tied to VCC or VSS to set the most-significant chip-enable bit of the 7-bit device select code; reads as 0 when left floating; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC ≥ 2.5 V)."+      },+      {+        "number": "4",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground; reference for the VCC supply voltage; decouple VCC to VSS with 10 nF-100 nF capacitor close to the package pins."+      },+      {+        "number": "5",+        "name": "SDA",+        "type": "bidirectional",+        "description": "Serial Data I/O; open-drain output that may be wire-OR'd with other open-drain signals; requires external pull-up resistor to VCC; input capacitance max 8 pF; IOL max 5 mA (SDA = 0)."+      },+      {+        "number": "6",+        "name": "SCL",+        "type": "input",+        "description": "Serial Clock input; strobes data on SDA(in) and clocks data out on SDA(out); supports I²C clock frequencies up to 1 MHz (VCC ≥ 1.7 V); input capacitance max 6 pF."+      },+      {+        "number": "7",+        "name": "WC",+        "type": "input",+        "description": "Write Control input; driving high disables write operations to the entire memory array (data bytes not acknowledged); driving low or leaving floating enables write operations; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC ≥ 2.5 V)."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage; operating range 1.7 V to 5.5 V over -40 °C to +85 °C (M24C32-F variant); must rise continuously from 0 V and remain stable throughout any write cycle tW (max 5 ms)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Datasheet does not provide explicit pin assignment table for SO8 (MN) package. Figure 2 on page 6 sh"+        ],+        "pages_sent": 51,+        "cost_usd": 0.3439,+        "at": "2026-09-27T12:37:41"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939308674273280",+        "pages": 51,+        "sha256": "8f13660da584f59c",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file