← Commit history

m24c32-dfmn6tp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·84eabe4d7c · ·parent 35888eb
2 files changed +90−10
package.json+48−8
@@ -68,19 +68,19 @@         "number": "1",         "name": "E0",         "type": "input",-        "description": "Chip Enable address bit b1; must be tied to VCC or VSS to set the least-significant bit of the 7-bit device select code; reads as 0 when left floating; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC \u2265 2.5 V)."+        "description": "Chip Enable address bit b1; must be tied to VCC or VSS to set the least-significant bit of the 7-bit device select code; reads as 0 when left floating; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC ≥ 2.5 V)."       },       {         "number": "2",         "name": "E1",         "type": "input",-        "description": "Chip Enable address bit b2; must be tied to VCC or VSS to set the middle bit of the 7-bit device select code; reads as 0 when left floating; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC \u2265 2.5 V)."+        "description": "Chip Enable address bit b2; must be tied to VCC or VSS to set the middle bit of the 7-bit device select code; reads as 0 when left floating; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC ≥ 2.5 V)."       },       {         "number": "3",         "name": "E2",         "type": "input",-        "description": "Chip Enable address bit b3; must be tied to VCC or VSS to set the most-significant chip-enable bit of the 7-bit device select code; reads as 0 when left floating; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC \u2265 2.5 V)."+        "description": "Chip Enable address bit b3; must be tied to VCC or VSS to set the most-significant chip-enable bit of the 7-bit device select code; reads as 0 when left floating; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC ≥ 2.5 V)."       },       {         "number": "4",@@ -98,19 +98,19 @@         "number": "6",         "name": "SCL",         "type": "input",-        "description": "Serial Clock input; strobes data on SDA(in) and clocks data out on SDA(out); supports I\u00b2C clock frequencies up to 1 MHz (VCC \u2265 1.7 V); input capacitance max 6 pF."+        "description": "Serial Clock input; strobes data on SDA(in) and clocks data out on SDA(out); supports I²C clock frequencies up to 1 MHz (VCC ≥ 1.7 V); input capacitance max 6 pF."       },       {         "number": "7",         "name": "WC",         "type": "input",-        "description": "Write Control input; driving high disables write operations to the entire memory array (data bytes not acknowledged); driving low or leaving floating enables write operations; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC \u2265 2.5 V)."+        "description": "Write Control input; driving high disables write operations to the entire memory array (data bytes not acknowledged); driving low or leaving floating enables write operations; VIL max 0.3 VCC, VIH min 0.7 VCC (at VCC ≥ 2.5 V)."       },       {         "number": "8",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage; operating range 1.7 V to 5.5 V over -40 \u00b0C to +85 \u00b0C (M24C32-F variant); must rise continuously from 0 V and remain stable throughout any write cycle tW (max 5 ms)."+        "description": "Supply voltage; operating range 1.7 V to 5.5 V over -40 °C to +85 °C (M24C32-F variant); must rise continuously from 0 V and remain stable throughout any write cycle tW (max 5 ms)."       }     ],     "provenance": {@@ -147,6 +147,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "m24c32-dfmn6tp.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "m24c32-dfmn6tp-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "392b2a00ed6de7aebd05ad50a2803de158d990bbd18973ecba996cf9923a6d0e",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -132,7 +132,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "m24c32-dfmn6tp.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "m24c32-dfmn6tp-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "392b2a00ed6de7aebd05ad50a2803de158d990bbd18973ecba996cf9923a6d0e",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -179,4 +219,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}