main
Ray
Publish 0.1.0
e298c79
M24C16-FDW6TP
STMicroelectronics · EEPROM · TSSOP-8
M24C16-FDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected (NC) per the Figure 2 note; no internal connection is stated. |
| 2 | NC | unconnected | Not connected (NC) per the Figure 2 note; no internal connection is stated. |
| 3 | NC | unconnected | Not connected (NC) per the Figure 2 note; no internal connection is stated. |
| 4 | VSS | power_in | Ground; the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial data I/O; an open drain output that may be wire-OR'ed with other open drain or open collector signals and requires a pull-up resistor to VCC. |
| 6 | SCL | input | Serial clock input used to strobe the data available on SDA(in) and to output data on SDA(out). |
| 7 | WC | input | Write control input; when driven high, write operations to the entire memory array are disabled, and when driven low or left floating they are enabled. |
| 8 | VCC | power_in | Supply voltage; for the M24C16-F it must be within 1.7 V to 5.5 V over the full temperature range (1.6 V to 1.7 V in the limited temperature range). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24C16-FDW6TP - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m24c16-fdw6tp-etched.step/m24c16-fdw6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c16-fdw6tp.step/m24c16-fdw6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (40 pp, sha256
5aa357764dc07b8f, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M24C16-FDW6TP
**STMicroelectronics** · EEPROM · TSSOP-8
M24C16-FDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected (NC) per the Figure 2 note; no internal connection is stated. |
| 2 | NC | unconnected | Not connected (NC) per the Figure 2 note; no internal connection is stated. |
| 3 | NC | unconnected | Not connected (NC) per the Figure 2 note; no internal connection is stated. |
| 4 | VSS | power_in | Ground; the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial data I/O; an open drain output that may be wire-OR'ed with other open drain or open collector signals and requires a pull-up resistor to VCC. |
| 6 | SCL | input | Serial clock input used to strobe the data available on SDA(in) and to output data on SDA(out). |
| 7 | WC | input | Write control input; when driven high, write operations to the entire memory array are disabled, and when driven low or left floating they are enabled. |
| 8 | VCC | power_in | Supply voltage; for the M24C16-F it must be within 1.7 V to 5.5 V over the full temperature range (1.6 V to 1.7 V in the limited temperature range). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `M24C16-FDW6TP`
- Footprint: `Package_SO:TSSOP-8_3x3mm_P0.65mm`
- 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files: `m24c16-fdw6tp-etched.step` / `m24c16-fdw6tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m24c16-fdw6tp.step` / `m24c16-fdw6tp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588940015287586816) (40 pp, sha256 `5aa357764dc07b8f`, retrieved 2026-10-10, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m24c16-fdw6tp-datasheet.pdf)