component

M24C08-WMN6TP

Public Made by Adom

by adom

STMicroelectronics EEPROM, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentmemorym24c08-wmn6tp
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs m24c08-wmn6tp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
m24c08-wmn6tp-etched.fit.json m24c08-wmn6tp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
m24c08-wmn6tp-etched.glb m24c08-wmn6tp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
m24c08-wmn6tp-etched.step m24c08-wmn6tp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
m24c08-wmn6tp.glb Publish 0.1.0 · Ray 1mo ago
m24c08-wmn6tp.kicad_mod Publish 0.1.0 · Ray 1mo ago
m24c08-wmn6tp.kicad_sym Publish 0.1.0 · Ray 1mo ago
m24c08-wmn6tp.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 8 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
m24c08-wmn6tp.step Publish 0.1.0 · Ray 1mo ago
package.json Publish 0.2.0 · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray 7d ago
README.md m24c08-wmn6tp: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 16d ago

M24C08-WMN6TP

STMicroelectronics · EEPROM · SOIC-8

M24C08-WMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected. Leave floating or tie to VSS.
2 NC unconnected Not connected. Leave floating or tie to VSS.
3 E2 input Chip Enable address input. Sets the value looked for on bit b3 of the device select code. Must be tied to VCC or VSS; when left floating it is read as low (0).
4 VSS power_in Ground reference for the VCC supply voltage.
5 SDA bidirectional I2C Serial Data input/output. Open-drain output that may be wire-OR'ed with other open-drain devices; requires an external pull-up resistor to VCC (see Figure 13 for pull-up sizing).
6 SCL input I2C Serial Clock input. Strobes data available on SDA(in) and clocks out data on SDA(out). Supports 100 kHz Standard-mode and 400 kHz Fast-mode operation.
7 WC input Write Control (active low). When driven high, write operations to the entire memory array are inhibited (device select and address bytes are still ACKed, data bytes are not). When driven low or left floating, writes are enabled.
8 VCC power_in Supply voltage. M24C08-W operating range 2.5 V to 5.5 V. Decouple to VSS with a 10 nF to 100 nF capacitor placed close to the package.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-8
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • M24C08-WMN6TP
  • M24C08-WMN6TPMN3T
  • M24C08-WMN6TPMN3TP
  • M24C08-WMN6TPDW6T
  • M24C08-WMN6TPDW6TP
  • M24C08-WMN6TPDW3T
  • M24C08-WMN6TPDW3TP
  • M24C08-WMN6TPBN6
  • M24C08-WMN6TPBN6P
  • M24C08-WMN6TPBN3
  • M24C08-WMN6TPBN3P
  • M24C08-WMN6TPMC6T
  • M24C08-WMN6TPMC6TP
  • M24C08-WMN6TPMH6T
  • M24C08-WMN6TPMH6TP
  • M24C08-WMN6TPCT6T

CAD (KiCad official)

  • Symbol: M24C08-WMN6TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: m24c08-wmn6tp-etched.step / m24c08-wmn6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m24c08-wmn6tp.step / m24c08-wmn6tp.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
m24c08-wmn6tp.step 122 KB You want the bare part, or you mark your own boards.
m24c08-wmn6tp-etched.step 2.4 MB You want the part with M24C08-WMN6TP already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 601 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (43 pp, sha256 a8e7416f57cd63f9, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF