main
Ray
m24c08-wmn6p: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
f668d58
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166
{
"slug": "m24c08-wmn6p",
"version": "0.1.0",
"type": "component",
"description": "STMicroelectronics EEPROM, SO-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"memory",
"m24c08-wmn6p"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"m24c08-wmn6p.kicad_sym",
"m24c08-wmn6p.kicad_mod",
"m24c08-wmn6p.glb",
"m24c08-wmn6p.step",
"m24c08-wmn6p.lbr",
"docs/hero.png",
"docs/m24c08-wmn6p-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"m24c08-wmn6p-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "M24C08-WMN6P",
"manufacturer": "STMicroelectronics",
"package": "SO-8",
"pin_count": 8,
"category": "EEPROM",
"parts": {
"symbol": "m24c08-wmn6p.kicad_sym",
"footprint": "m24c08-wmn6p.kicad_mod",
"model_3d": "m24c08-wmn6p-etched.glb",
"model_3d_plain": "m24c08-wmn6p.glb",
"model_3d_step": "m24c08-wmn6p-etched.step",
"model_3d_step_plain": "m24c08-wmn6p.step",
"lbr": "m24c08-wmn6p.lbr"
},
"pins": [
{
"number": "1",
"name": "NC",
"type": "unconnected",
"description": "Not connected. In the SO8/TSSOP8/PDIP8/UFDFPN8 8-lead M24C08, pin 1 is unused (reserved / no internal bond). May be left floating or tied to VSS."
},
{
"number": "2",
"name": "NC",
"type": "unconnected",
"description": "Not connected. In the SO8/TSSOP8/PDIP8/UFDFPN8 8-lead M24C08, pin 2 is unused. May be left floating or tied to VSS."
},
{
"number": "3",
"name": "E2",
"type": "input",
"description": "Chip Enable address input. Sets the value of bit b3 of the I2C device select code (1010 E2 A9 A8 R/W), allowing up to two M24C08 devices to share the same I2C bus. Must be tied to VCC or VSS; if left floating it is read as 0."
},
{
"number": "4",
"name": "VSS",
"type": "power_in",
"description": "Ground reference for VCC and all logic signals. 0 V."
},
{
"number": "5",
"name": "SDA",
"type": "bidirectional",
"description": "I2C Serial Data input/output. Open-drain output - an external pull-up resistor from SDA to VCC is required (typical 1 kΩ-10 kΩ depending on bus capacitance and speed; see Figure 13 for Rbus vs. Cbus at 400 kHz)."
},
{
"number": "6",
"name": "SCL",
"type": "input",
"description": "I2C Serial Clock input. Strobes data available on SDA(in) and clocks out data on SDA(out). Supports 100 kHz standard-mode and 400 kHz fast-mode I2C."
},
{
"number": "7",
"name": "WC",
"type": "input",
"description": "Write Control (write protect). When driven high, the entire memory array is protected: device select and address bytes are acknowledged but data bytes are NoAck'd and no write occurs. Write operations are enabled when WC is driven low or left floating (internal pull-down / read as 0)."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Positive supply voltage. For the -W variant: 2.5 V to 5.5 V operating range. Decouple to VSS with a 10 nF-100 nF capacitor close to the package."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C283441",
"digikey": "497-8565-5-ND",
"mouser": "511-M24C08-WMN6P"
},
"distributor_check": {
"checked_at": "2026-10-05T19:07:00Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": "497-8565-5-ND",
"status": "found"
},
"mouser": {
"pn": "511-M24C08-WMN6P",
"status": "found"
}
},
"models_3d": [
{
"file": "m24c08-wmn6p.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "m24c08-wmn6p-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "b0bc7b28f300185f11dc0968d712af0134d5be107174996f06b89fca197198ad",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}