component
M24C08-FDW6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM24C08-FDW6TP
STMicroelectronics · EEPROM · TSSOP-8
M24C08-FDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected. |
| 2 | NC | unconnected | Not connected. |
| 3 | E2 | input | Chip Enable input sets the value looked for on bit b3 of the device select code; it must be tied to VCC or VSS, and when left floating it is read as low (0). |
| 4 | VSS | power_in | Ground, the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial Data input/output with an open-drain output that needs a pull-up resistor to VCC. |
| 6 | SCL | input | Serial Clock input that strobes data in on SDA and clocks data out on SDA. |
| 7 | WC | input | Write Control input disables write operations to the entire memory array when driven high, and enables them when driven low or left floating. |
| 8 | VCC | power_in | Supply voltage, 1.7 V to 5.5 V for the M24C08-F (1.6 V to 1.7 V with limited temperature range), decoupled with about 10 nF to 100 nF close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24C08-FDW6TP - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m24c08-fdw6tp-etched.step/m24c08-fdw6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c08-fdw6tp.step/m24c08-fdw6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (43 pp, sha256
a8e7416f57cd63f9, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).