M24C04-FDW6TP

{
  "slug": "m24c04-fdw6tp",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "m24c04-fdw6tp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "m24c04-fdw6tp.kicad_sym",
    "m24c04-fdw6tp.kicad_mod",
    "m24c04-fdw6tp.glb",
    "m24c04-fdw6tp.step",
    "m24c04-fdw6tp.lbr",
    "docs/hero.png",
    "docs/m24c04-fdw6tp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "m24c04-fdw6tp-hero.glb",
    "m24c04-fdw6tp-hero.overlay.json"
  ],
  "component": {
    "mpn": "M24C04-FDW6TP",
    "manufacturer": "STMicroelectronics",
    "package": "TSSOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588938958009352192",
    "parts": {
      "symbol": "m24c04-fdw6tp.kicad_sym",
      "footprint": "m24c04-fdw6tp.kicad_mod",
      "model_3d": "m24c04-fdw6tp-hero.glb",
      "model_3d_plain": "m24c04-fdw6tp.glb",
      "model_3d_step": "m24c04-fdw6tp-etched.step",
      "model_3d_step_plain": "m24c04-fdw6tp.step",
      "lbr": "m24c04-fdw6tp.lbr"
    },
    "distributor_links": {
      "lcsc": "C2061106",
      "digikey": "497-15749-2-ND",
      "mouser": "511-M24C04-FDW6TP"
    },
    "distributor_check": {
      "checked_at": "2026-10-06T03:28:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-15749-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-M24C04-FDW6TP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally, per the 8-pin package connections figure."
      },
      {
        "number": "2",
        "name": "E1",
        "type": "input",
        "description": "Chip Enable input that sets device select code bit b2 and must be tied to VCC or VSS; it reads as low (0) if left floating."
      },
      {
        "number": "3",
        "name": "E2",
        "type": "input",
        "description": "Chip Enable input that sets device select code bit b3 and must be tied to VCC or VSS; it reads as low (0) if left floating."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground, the reference for the VCC supply voltage."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data input/output with an open-drain output that needs a pull-up resistor to VCC."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input that strobes data on SDA in and out."
      },
      {
        "number": "7",
        "name": "WC",
        "type": "input",
        "description": "Write Control input, active high: it disables writes to the whole memory array when driven high and enables them when driven low or left floating."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage; the M24C04-F range is 1.7 V to 5.5 V at full temperature range (1.6 V to 1.7 V at limited temperature range), and a 10 nF to 100 nF decoupling capacitor is recommended close to the pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Figure 2 (8-pin package connections, top view) is shared by all 8-pin packages and is not labelled T",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 40,
        "cost_usd": 0.4267,
        "at": "2026-10-06T03:28:27"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588938958009352192",
        "pages": 40,
        "sha256": "acdd2c1e824df526",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  }
}