Generated by adom_assets · KiCad file format 20240108
M24C04-DRDW8TP
STMicroelectronics · EEPROM · TSSOP-8 (ST TSSOP8)
M24C04-DRDW8TP from STMicroelectronics, in a TSSOP-8 (ST TSSOP8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected; the datasheet gives no function for this pin. |
| 2 | E1 | input | Chip Enable input setting bit b2 of the device select code; tie to VCC or VSS, and when left floating it is read as low (0). |
| 3 | E2 | input | Chip Enable input setting bit b3 of the device select code; tie to VCC or VSS, and when left floating it is read as low (0). |
| 4 | VSS | power_in | Ground, the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial data input/output with open-drain output that needs a pull-up resistor to VCC. |
| 6 | SCL | input | Serial clock input that strobes data on SDA in and out. |
| 7 | WC | input | Write Control input; writes to the entire memory are disabled when driven high and enabled when driven low or left floating. |
| 8 | VCC | power_in | Supply voltage pin, 1.7 V to 5.5 V operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 (ST TSSOP8) |
| Category | Memory |
| Pins | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | TLEAD Lead temperature during soldering see note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST | 26 |
CAD (Adom-generated)
- Symbol:
M24C04-DRDW8TP - Footprint:
Adom_Gen:STMicroelectronics_TSSOP8 - 3D model: generated to fit the land (STEP)
- 3D model files:
m24c04-drdw8tp-etched.step/m24c04-drdw8tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c04-drdw8tp.step/m24c04-drdw8tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet, copy hosted by JLCPCB (42 pp, sha256
a028fff67c4e1372, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Its own sheet (sha a028fff67c4e) prints no TSSOP8 land; ST's printed TSSOP8 land, M24512 DS6520 Rev 31 p.32 Figure 18 (TSSOP8 - Recommended footprint): 1.0 x 0.35 mm pads, pitch 0.65, 7.0 outer, rows 6.0 c-c. Same package: this part's own outline on record (M24C04-DRDW8TP-dims.extracted.json, TSSOP8 p.34): body (2.9, 3.1) x (4.3, 4.5), lead span (6.2, 6.6), pitch 0.65 = ST TSSOP8 (D 2.9/3.0/3.1, E1 4.3/4.4/4.5, E 6.2/6.4/6.6, e 0.65). Shared land Adom_Gen:STMicroelectronics_TSSOP8. Task master ruling 2026-11-21 (ST TSSOP8).