main
Ray
m24c02-wmn6p: laser-etched CAD + chip hero (factory 2.0.0 backfill)
0b6d00e
M24C02-WMN6P
STMicroelectronics · EEPROM · SO-8
M24C02-WMN6P from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip-Enable address bit 0. Tied to VCC or VSS to set the least-significant bit of the 7-bit I2C slave address (device select b1). Read as 0 if left floating. |
| 2 | E1 | input | Chip-Enable address bit 1. Tied to VCC or VSS to set device select bit b2 of the 7-bit I2C slave address. Read as 0 if left floating. |
| 3 | E2 | input | Chip-Enable address bit 2. Tied to VCC or VSS to set device select bit b3 of the 7-bit I2C slave address. Read as 0 if left floating. |
| 4 | VSS | power_in | Ground reference for the VCC supply. Connect to system ground. |
| 5 | SDA | bidirectional | I2C Serial Data. Open-drain bidirectional line used to transfer data in and out of the device; requires an external pull-up resistor to VCC. Compatible with 100 kHz and 400 kHz I2C modes. |
| 6 | SCL | input | I2C Serial Clock input. Strobes data on SDA (in on rising edge, out shifted while low). Maximum 400 kHz. |
| 7 | WC | input | Write Control (active-high write protect). When driven high, write operations to the entire memory array are inhibited and data bytes return NoAck; low or floating enables writes. |
| 8 | VCC | power_in | Supply voltage input. M24C02-W operates from 2.5 V to 5.5 V. Decouple to VSS with a 10-100 nF capacitor close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
M24C02-WMN6PM24C02-WMN6PDWM24C02-WMN6PBNM24C02-WMN6PMCM24C02-WMN6PMH
CAD (KiCad official)
- Symbol:
M24C02-WMN6P - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
m24c02-wmn6p-etched.step/m24c02-wmn6p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c02-wmn6p.step/m24c02-wmn6p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (None pp, sha256
943c0b9f52652f9b, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M24C02-WMN6P
**STMicroelectronics** · EEPROM · SO-8
M24C02-WMN6P from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip-Enable address bit 0. Tied to VCC or VSS to set the least-significant bit of the 7-bit I2C slave address (device select b1). Read as 0 if left floating. |
| 2 | E1 | input | Chip-Enable address bit 1. Tied to VCC or VSS to set device select bit b2 of the 7-bit I2C slave address. Read as 0 if left floating. |
| 3 | E2 | input | Chip-Enable address bit 2. Tied to VCC or VSS to set device select bit b3 of the 7-bit I2C slave address. Read as 0 if left floating. |
| 4 | VSS | power_in | Ground reference for the VCC supply. Connect to system ground. |
| 5 | SDA | bidirectional | I2C Serial Data. Open-drain bidirectional line used to transfer data in and out of the device; requires an external pull-up resistor to VCC. Compatible with 100 kHz and 400 kHz I2C modes. |
| 6 | SCL | input | I2C Serial Clock input. Strobes data on SDA (in on rising edge, out shifted while low). Maximum 400 kHz. |
| 7 | WC | input | Write Control (active-high write protect). When driven high, write operations to the entire memory array are inhibited and data bytes return NoAck; low or floating enables writes. |
| 8 | VCC | power_in | Supply voltage input. M24C02-W operates from 2.5 V to 5.5 V. Decouple to VSS with a 10-100 nF capacitor close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
## Ordering variants
- `M24C02-WMN6P`
- `M24C02-WMN6PDW`
- `M24C02-WMN6PBN`
- `M24C02-WMN6PMC`
- `M24C02-WMN6PMH`
## CAD (KiCad official)
- Symbol: `M24C02-WMN6P`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `m24c02-wmn6p-etched.step` / `m24c02-wmn6p-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m24c02-wmn6p.step` / `m24c02-wmn6p.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/m24c02-wmn6p.pdf) (None pp, sha256 `943c0b9f52652f9b`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m24c02-wmn6p-datasheet.pdf)