← Commit history
m24c02-rmn6p: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+89−9
package.json+47−7@@ -68,19 +68,19 @@ "number": "1", "name": "E0", "type": "input",- "description": "Chip Enable address bit 0; must be tied to VCC or VSS to set the least-significant bit of the 7-bit I\u00b2C device select code (b1); left floating is read as low (0)."+ "description": "Chip Enable address bit 0; must be tied to VCC or VSS to set the least-significant bit of the 7-bit I²C device select code (b1); left floating is read as low (0)." }, { "number": "2", "name": "E1", "type": "input",- "description": "Chip Enable address bit 1; must be tied to VCC or VSS to set bit b2 of the 7-bit I\u00b2C device select code; left floating is read as low (0)."+ "description": "Chip Enable address bit 1; must be tied to VCC or VSS to set bit b2 of the 7-bit I²C device select code; left floating is read as low (0)." }, { "number": "3", "name": "E2", "type": "input",- "description": "Chip Enable address bit 2; must be tied to VCC or VSS to set bit b3 of the 7-bit I\u00b2C device select code; left floating is read as low (0)."+ "description": "Chip Enable address bit 2; must be tied to VCC or VSS to set bit b3 of the 7-bit I²C device select code; left floating is read as low (0)." }, { "number": "4",@@ -104,13 +104,13 @@ "number": "7", "name": "WC", "type": "input",- "description": "Write Control input; driven high disables write operations to the entire memory array (data bytes are not acknowledged); driven low or left floating enables write operations; input impedance 15-70 k\u03a9 when VIN < 0.3 VCC."+ "description": "Write Control input; driven high disables write operations to the entire memory array (data bytes are not acknowledged); driven low or left floating enables write operations; input impedance 15-70 kΩ when VIN < 0.3 VCC." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Supply voltage; M24C02-R variant operates from 1.8 V to 5.5 V; standby current max 1 \u00b5A at VCC = 1.8 V, max 3 \u00b5A at VCC = 5.5 V; read current max 0.8 mA at VCC = 1.8 V, fc = 400 kHz."+ "description": "Supply voltage; M24C02-R variant operates from 1.8 V to 5.5 V; standby current max 1 µA at VCC = 1.8 V, max 3 µA at VCC = 5.5 V; read current max 0.8 mA at VCC = 1.8 V, fc = 400 kHz." } ], "provenance": {@@ -147,6 +147,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "m24c02-rmn6p.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "m24c02-rmn6p-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "709808beb2f2f195f7cfae636a81c2c9bee3a8a2e4f93bd77dc29c3995586fb1",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -132,7 +132,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "m24c02-rmn6p.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "m24c02-rmn6p-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "709808beb2f2f195f7cfae636a81c2c9bee3a8a2e4f93bd77dc29c3995586fb1",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -179,4 +219,4 @@ "visibility": { "public": true }-}+}